BMR Launches New Product - 2010 Camaro 4-Point Strut Tower Brace (STB014) - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BMR Suspension · 08-10-2010, 04:40 PM

BMR Fabrication

4-Point Strut Tower Brace for the 2010 Camaro

Minimize strut tower deflection in your 5th Gen Camaro with a 4-Point Strut Tower Brace from BMR Fabrication. Constructed from large diameter 1.75” x 0.120” tubing, this product maintains front end stability by canceling tower deflection. The BMR 4-Point Strut Tower Brace (STB014) mounts directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. Additionally, two forward links tie the towers to the fender/core support area to further reinforce the front end. Billet aluminum strut retainers replace the OE stamped steel parts for an improved look as well. Installation time is only 3 hours. Available in black hammertone or red powdercoat.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

URDAMAN · 08-10-2010, 04:53 PM

Nice..does this version clear the maggie?

Racer606 · 08-10-2010, 05:02 PM

Do you have any installed pics?

BMR Sales · 08-11-2010, 09:01 AM

Quote:

Originally Posted by URDAMAN

Nice..does this version clear the maggie?

Were have one in the works to clear the Maggie which will hopefully be out in next month or two. Our shop car has a TVS2300 so getting a strut tower brace to fit it is a pretty high priorty at this point.

BMR Sales · 08-11-2010, 09:33 AM

Quote:

Originally Posted by Racer606

Do you have any installed pics?

Here are some pictures of the two point strut tower brace installed, we had some computer issue not too long ago so i am going to have to dig up the pictures of the four point strut tower brace.

2010 2-Tone · 08-11-2010, 09:33 AM

Please pm me a price shipped to 70546.

BMR Sales · 08-11-2010, 09:34 AM

Quote:

Originally Posted by 2010 2-Tone

Please pm me a price shipped to 70546.

PM sent!

BMR guy · 08-12-2010, 01:58 PM

Here's one!

You can also view installation instructions for these HERE.

Jose · 08-12-2010, 02:58 PM

Just got mine on Monday, will install it tomorrow!!!!!

BMR guy · 08-12-2010, 03:10 PM

Quote:

Originally Posted by Jose

Just got mine on Monday, will install it tomorrow!!!!!

Post some pics when you are done!

08-10-2010, 04:40 PM	#1
BMR Suspension Drives: 2016 Camaro 2SS Join Date: Aug 2009 Location: Tampa, FL Posts: 498	BMR Launches New Product - 2010 Camaro 4-Point Strut Tower Brace (STB014) BMR Fabrication 4-Point Strut Tower Brace for the 2010 Camaro Minimize strut tower deflection in your 5th Gen Camaro with a 4-Point Strut Tower Brace from BMR Fabrication. Constructed from large diameter 1.75” x 0.120” tubing, this product maintains front end stability by canceling tower deflection. The BMR 4-Point Strut Tower Brace (STB014) mounts directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. Additionally, two forward links tie the towers to the fender/core support area to further reinforce the front end. Billet aluminum strut retainers replace the OE stamped steel parts for an improved look as well. Installation time is only 3 hours. Available in black hammertone or red powdercoat. To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Product Manager - interview	Moose	5th Gen Camaro SS LS LT General Discussions	11	04-04-2012 06:10 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM

08-10-2010, 04:53 PM	#2
URDAMAN Drives: 2010 IBM 2SS / RS Join Date: May 2010 Location: Augusta, GA Posts: 204 View My Garage	Nice..does this version clear the maggie?

08-10-2010, 05:02 PM	#3
Racer606 Drives: '10 Camaro SS/RS, '03 Mini Cooper S Join Date: May 2009 Location: Charlotte, NC Posts: 80 View My Garage	Do you have any installed pics?

08-11-2010, 09:33 AM	#6
2010 2-Tone Drives: 2010 RY 2SS with Custom Stripes Join Date: Mar 2009 Location: Jennings, La. Posts: 2,220 View My Garage	Please pm me a price shipped to 70546.

08-12-2010, 01:58 PM	#8
BMR guy Drives: 2010 1SS Join Date: Jan 2010 Location: Tampa, FL Posts: 1,002	Here's one! You can also view installation instructions for these HERE.

08-12-2010, 02:58 PM	#9
Jose Drives: 2010 Camaro 2SS/RS White S/C Join Date: Aug 2010 Location: Puerto Rico Posts: 842 View My Garage	Just got mine on Monday, will install it tomorrow!!!!!