03-30-2014, 02:59 PM | #1 |
www.Camaro5store.com
|
LAST CALL FOR EVENT SHIRTS
Pre-orders continue to come in but we don't have much time left. We need to get shirts ordered and off to the printer. To do that, we'll need to wrap up pre-orders shutting down the ability to order them on the site.
Please...if you have the means, don't wait to get yours ordered/picked up until the fest. We'd like to try to solidify some good numbers on each size and by doing the pre-order, you are guaranteed your size along with helping us figure out percentages and quantities of sizes to order. Ordering ends 4/2 at midnight. So far, we only have mens and kids shirts images up on the site. But we will have women's scoop neck fest shirts at the track. You can place your order here Art will look like the following for all shirts: |
03-31-2014, 09:42 AM | #2 |
Camaro5 Store Goddess
|
Bump bump bump. Ladies, the ladies' tees are a flattering Next Level cotton scoop tee. They are NOT a crew that sits close to the throat.
|
04-02-2014, 10:39 PM | #3 |
Camaro5 Store Goddess
|
Shirts!!!!!
|
04-02-2014, 10:42 PM | #4 |
www.Camaro5store.com
|
SHIIIIIIIIIIIIIRRRRRRRRRRRRRRTTTTTTTTTTTTTSSSSSSSS SSSSSS
|
04-10-2014, 06:50 PM | #5 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,282
|
Damn I missed the deadline. Will you still have some available for those who did not pre-order?
__________________
|
04-10-2014, 06:54 PM | #6 |
www.Camaro5store.com
|
Order now! We still have to tally up the shirt sizes for the printer!
|
04-11-2014, 02:05 AM | #7 |
In The Circle
Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 11,282
|
Can't seem to get into my account.
__________________
|
04-11-2014, 07:53 PM | #8 |
www.Camaro5store.com
|
For those not attending but wanting shirts, Dana went ahead and turned on shipping for the time being. We've had quite a few requests for the shirts plus shipping. SO....go for it now while she's got the shipping turned on. Makes life a LOT easier to do it this way!!!
For those not wanting shipping added and ordering tonight, no worries. Just order and put a note in there saying you'll be picking them up at the fest. Dana will refund the shipping. |
04-12-2014, 07:09 PM | #9 |
www.Camaro5store.com
|
Shipping has been turned back OFF.
|
04-12-2014, 07:10 PM | #10 |
www.Camaro5store.com
|
|
04-28-2014, 10:24 AM | #11 |
Camaro5 Store Goddess
|
OK, everyone, pre-orders options and all Camaro5 items in the store will go dark at 9:00pm cdt tonight so that we can start getting ready for the Fest. If you want to make sure we have your size, go pre-order now before it is too late!
|
04-29-2014, 09:56 PM | #12 |
Drives: 2012 Crystal Red Tintcoat 2SS/RS Join Date: Jun 2012
Location: Spring, TX
Posts: 71
|
Hope you have some shirts available at the Fest.
__________________
ADM cold air intake with scoop, Solo Mach XL catback exhaust, custom tune, Stainless Power LT headers, RX catch can in Crystal Red Metallic
Custom Grind Cam 222int 230exh .601"/.608 116*+4, TSP 25% UD Pulley w/ ACC Serpentine Belt, 160* Thermostat, Melling High Pressure Oil Pump,LS3 Conversion,C5R Timing Chain,Amzoil ZROD 10W30,NGK TR6 Spark Plugs, Professional Stage II Cylinder Head Porting Service (360+ CFM), Install by 510 Race Engineering 445 RWHP, 419 ft/lb tq |
04-29-2014, 11:09 PM | #13 |
www.Camaro5store.com
|
|
04-30-2014, 09:20 PM | #14 |
Drives: 2012 Crystal Red Tintcoat 2SS/RS Join Date: Jun 2012
Location: Spring, TX
Posts: 71
|
Did I see you in Spring earlier today? I almost said something if that was you stopped at the intersection of Old Holzwarth and Spring Cypress around 5:15 PM.
__________________
ADM cold air intake with scoop, Solo Mach XL catback exhaust, custom tune, Stainless Power LT headers, RX catch can in Crystal Red Metallic
Custom Grind Cam 222int 230exh .601"/.608 116*+4, TSP 25% UD Pulley w/ ACC Serpentine Belt, 160* Thermostat, Melling High Pressure Oil Pump,LS3 Conversion,C5R Timing Chain,Amzoil ZROD 10W30,NGK TR6 Spark Plugs, Professional Stage II Cylinder Head Porting Service (360+ CFM), Install by 510 Race Engineering 445 RWHP, 419 ft/lb tq |
|
|
Thread Tools | |
|
|