Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Suspension / Brakes / Chassis


Reply
 
Thread Tools
Old 05-24-2010, 09:52 PM   #1
mws444


 
mws444's Avatar
 
Drives: 701 RWHP Lingenfelter/Pedders Beast
Join Date: Apr 2009
Location: El Paso
Posts: 2,973
Finally finished picking my Suspension

After a very long and indepth investigation in the the myriad of offerings I have finally got everything ordered. It will be installed by Heath and his team at American Muffler in Fredricksberg TX. If everything goes well within the next couple of weeks I will load up the car in the new rig and get er done!
I went with a hybrid system of sorts because of availability. Take a look:

From Pedders:

164086 SportsRyder Supercar Coilover
EP1167HD Zeta HD Differential Mounts
EP1201HD Camaro HD Rear Sub Frame Repl
EP2112 Zeta Steering Rack/Pinion Mnt
EP6577 Camaro Front Radius Rod Bush
EP7264 Zeta Rear Lower Control Arm In
EP7322 Camaro Rear Upper Control Arm
EP7323 Zeta Rear Trailing ArmToe Link
PDUSACAM2800 Camaro Complete Brake Hose Kit
PDUSACAMFULL Camaro Full Alignment Kit

From Pfadt:

Camaro Adjustable Sway Bars - Sport
Camaro Performance Rear Trailing Arm
Pfadt Camaro Sway Bar End Links
2010 Camaro Engine Mounts
and maybe the new 2010 Camaro Camber Kit if I can find out if they will work.

On the sways it was more about availability, I think they both have awesome sways.
I choose Pedders for the bulk of the parts as I feel they have the most experience with the Zeta platform. Pfadt is coming on strong and have a great reputation in their own right with the Vettes, and have invested heavily in the Camaro. I guess in a couple of weeks I will be here posting the results of my quest for supercar handling.
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune.
701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers.
CCW 505t's Nitto Invo's and DR's
Beware of the LPE Brotherhood!

Last edited by mws444; 05-29-2010 at 08:50 AM.
mws444 is offline   Reply With Quote
Old 05-24-2010, 10:14 PM   #2
Mr Twisty


 
Mr Twisty's Avatar
 
Drives: the 2nd amendment home
Join Date: May 2008
Location: OK
Posts: 14,707
Sweet! Let us know how you like the upgrades
__________________
"They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety."
-- Benjamin Franklin
Mr Twisty is offline   Reply With Quote
Old 05-25-2010, 07:42 AM   #3
1977and2010
Tampa Gulf Coast Family
 
1977and2010's Avatar
 
Drives: 1977 Z28, 2SSRS 2010 M6
Join Date: Sep 2009
Location: Dunedin FL
Posts: 810
Yeah, let us know how that all turns out.
__________________
1977and2010 is offline   Reply With Quote
Old 05-25-2010, 09:07 AM   #4
Info@PeddersUSA.com
 
Info@PeddersUSA.com's Avatar
 
Drives: 5th Gen Rental
Join Date: Aug 2007
Location: New England
Posts: 1,901
Heath and the guys at American Muffler are first class. There location allow2s them to be very reasonable compaired to shops in San Antonio. Pedders uses them to assist us in our dealer meetings and training. You will seriously enjoy what your Camaro will be able to do.



thanks
mike
dms
Info@PeddersUSA.com is offline   Reply With Quote
Old 05-25-2010, 12:02 PM   #5
mws444


 
mws444's Avatar
 
Drives: 701 RWHP Lingenfelter/Pedders Beast
Join Date: Apr 2009
Location: El Paso
Posts: 2,973
Thanks Guys...I cant wait to get all of this on my car and shake it all out.

Here are some pics of the new remote resevoir coilovers I got off of the pedders site. Man if these things perform as good as they look, I need to invest in a tire company.

Thanks for the heads up Partsgetter!
Attached Images
   
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune.
701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers.
CCW 505t's Nitto Invo's and DR's
Beware of the LPE Brotherhood!
mws444 is offline   Reply With Quote
Old 05-26-2010, 10:17 AM   #6
PartsGedder
 
Drives: -
Join Date: Sep 2007
Location: West Michigan
Posts: 53
Only a few more days until you get to see them in person...

__________________
Dan Morris
PartsGedder is offline   Reply With Quote
Old 05-26-2010, 12:18 PM   #7
PfadtRacing
 
PfadtRacing's Avatar
 
Drives: 2010 Camaro, 2006 Z06
Join Date: Feb 2009
Location: SLC, UT
Posts: 3,370
Quote:
Originally Posted by mws444 View Post

From Pfadt:

Camaro Adjustable Sway Bars - Sport
Camaro Performance Rear Trailing Arm
Pfadt Camaro Sway Bar End Links
2010 Camaro Engine Mounts
and maybe the new 2010 Camaro Camber Kit if I can find out if they will work.
Thank you for your business! We know that you are going to be thrilled with our products, and left wanting more! Please contact us with any questions you have.

If your new coilover setup uses the OEM front strut top, then the Camber/Caster plates should work great! Give us a call to sort it out once you get the parts in your hands. It is the only way to adjust Camber/Caster and solve the articulation problem imposed by using the OEM front strut top. Let us know how the Pfadt products work out for you!
PfadtRacing is offline   Reply With Quote
Old 05-26-2010, 12:47 PM   #8
Info@PeddersUSA.com
 
Info@PeddersUSA.com's Avatar
 
Drives: 5th Gen Rental
Join Date: Aug 2007
Location: New England
Posts: 1,901
this is an interesting marriage of components. I am looking forward to what everyone will do with the adjustments on the new dampers!

Mike
dms
Info@PeddersUSA.com is offline   Reply With Quote
Old 05-26-2010, 02:33 PM   #9
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 111,187
nice
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 05-26-2010, 02:55 PM   #10
ron10


 
Drives: 2010 2SS IOM L99
Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,545
very nice.
ron10 is offline   Reply With Quote
Old 05-26-2010, 05:59 PM   #11
Apex Motorsports
 
Apex Motorsports's Avatar
 
Drives: 2000 Camaro SS
Join Date: Feb 2010
Location: Louisville, Ky.
Posts: 25,179
Thats going to be one sick set up.
Apex Motorsports is offline   Reply With Quote
Old 05-26-2010, 08:19 PM   #12
mws444


 
mws444's Avatar
 
Drives: 701 RWHP Lingenfelter/Pedders Beast
Join Date: Apr 2009
Location: El Paso
Posts: 2,973
Quote:
Originally Posted by PfadtRacing View Post
Thank you for your business! We know that you are going to be thrilled with our products, and left wanting more! Please contact us with any questions you have.

If your new coilover setup uses the OEM front strut top, then the Camber/Caster plates should work great! Give us a call to sort it out once you get the parts in your hands. It is the only way to adjust Camber/Caster and solve the articulation problem imposed by using the OEM front strut top. Let us know how the Pfadt products work out for you!
Just sent you a PM, I believe they use the stock mounts. Maybe someone who know for sure can chime in here and let us know.
If they will work I am game to give them a go. We will have to hurry though as I will need them delivered by Wed. of next week.
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune.
701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers.
CCW 505t's Nitto Invo's and DR's
Beware of the LPE Brotherhood!
mws444 is offline   Reply With Quote
Old 05-26-2010, 08:22 PM   #13
mws444


 
mws444's Avatar
 
Drives: 701 RWHP Lingenfelter/Pedders Beast
Join Date: Apr 2009
Location: El Paso
Posts: 2,973
Quote:
Originally Posted by PartsGedder View Post
Only a few more days until you get to see them in person...

Cant Wait!!
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune.
701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers.
CCW 505t's Nitto Invo's and DR's
Beware of the LPE Brotherhood!
mws444 is offline   Reply With Quote
Old 05-26-2010, 09:38 PM   #14
Bruce@raymondsperformance
 
Bruce@raymondsperformance's Avatar
 
Drives: 2014 Z28 camaro
Join Date: Sep 2009
Location: Indy
Posts: 705
As far as I know they do use the oem upper mounts.
Bruce@raymondsperformance is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newest Camaro Ugrade at a Seriously Knowledgable Pedders Suspension Export in Mt. Vie Info@PeddersUSA.com Suspension / Brakes / Chassis 8 04-21-2010 11:15 PM
Finished Exhaust Work (video attached ) Lava Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 36 03-28-2010 09:58 PM
Finally Finished By Black & Red Themed 2ss Exterior SSCamaroKid Camaro Photos | Spyshots | Video | Media Gallery 18 03-08-2010 09:58 AM
Finally finished with mine! I think... nUcLeArEnVoY Camaro Photoshops / Renderings Forum 13 11-20-2008 06:47 AM
Finally accieved a finished product. Xanthos Camaro Photoshops / Renderings Forum 1 11-08-2008 01:35 AM


All times are GMT -5. The time now is 11:02 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.