01-21-2015, 09:56 PM | #1 |
Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008
Location: Portland, TN
Posts: 2,955
|
ZL1 upper control arm bushing bolts
I'm doing a ZL1 diff swap in my SS. The salvage yard sent the diff still attached to the subframe, so I decided to use the ZL1 subframe. When transferring my upper control arms over, I found that the ZL1 uses larger bolts to hold down the bushing. When I look at the suspension diagrams on GM sites, the part number comes up as 92139140. That part number is not right for the ZL1. That's the bolts for the SS. I'm assuming the dealer will show the same info. Anyone have the correct part number or at least know the thread size? Thanks.
Two bolts on each side going in from the top.
__________________
2017 Krypton Green SS 1LE
Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins |
01-22-2015, 01:56 PM | #2 |
Drives: 2017 Camaro SS1LE 2000 Trans Am WS6 Join Date: Jul 2008
Location: Portland, TN
Posts: 2,955
|
In case anyone else has this issue, the part number should be 11589351. I'll know for sure in a few days.
Edit.... That is the correct part number.
__________________
2017 Krypton Green SS 1LE
Magnacharged 2000 Trans Am WS6 manual trans 2002 Trans Am 2015 Ram Crew Cab Cummins Last edited by yotaman96; 01-28-2015 at 09:54 PM. |
|
|
|
|