How do I install decals? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

DennisfromIowa · 02-21-2012, 06:30 PM

I was wondering how do you install the Camaro5.com decals? Peel and stick or ?? Thanks

metthem · 02-21-2012, 06:49 PM

clean the area with rubbing alcohol, let dry and apply

CooG · 02-22-2012, 01:46 PM

If you want to make sure you don't get any air bubbles and can move & position it like you want it, you can install it like the vinyl rally stripes are installed.

Lightly spray area with spray bottle filled with water and few drops of dish washing soap.
Lightly spray the back of the sticker.
Position sticker where you want it.
Squeegie the water out starting in the middle.
TA-DA!!

midnighter · 02-22-2012, 01:52 PM

Quote:

Originally Posted by CooG

If you want to make sure you don't get any air bubbles and can move & position it like you want it, you can install it like the vinyl rally stripes are installed.

Lightly spray area with spray bottle filled with water and few drops of dish washing soap.
Lightly spray the back of the sticker.
Position sticker where you want it.
Squeegie the water out starting in the middle.
TA-DA!!

This. If you don't you will more than likely get bubbles.

*TAG UR IT* · 02-24-2012, 01:26 AM

Yup. The clear with white thermal transfer camaro5.com stickers are a bit more difficult. That is why I like the die cut stickers. They are so much cleaner.

If it's the circle 5 sticker that someone is trying to apply, we've found that they are a bit difficult to remove from the actual paper. You might need a sharp razor to pick up a side of the sticker (be careful not to cut it) to get it started. Once you do that, it comes off.

INTIMIDAT3R · 04-19-2012, 08:46 PM

Quote:

Originally Posted by DennisfromIowa

I was wondering how do you install the Camaro5.com decals? Peel and stick or ?? Thanks

Hammer and nails.

firefighter1 · 04-19-2012, 09:10 PM

That's why my contact cement didn't work!

02-21-2012, 06:30 PM	#1
DennisfromIowa Drives: 2012 2LS silver ice metallic V6 Join Date: Jan 2012 Location: DSM Iowa Posts: 143 View My Garage	How do I install decals? I was wondering how do you install the Camaro5.com decals? Peel and stick or ?? Thanks

02-21-2012, 06:49 PM	#2
metthem Drives: 2011 LS Join Date: Oct 2010 Location: Cincinnati Posts: 943	clean the area with rubbing alcohol, let dry and apply __________________ Trifecta tune, CAI intake, ADM Race Scoop, Doug Thorley Shorties, Solo High Flow Cats, Magnaflow resonated X-pipe, Flowmaster AMT axle back, Gary's custom front bowtie, rear bowtie delete, tinted windows, headlights, and taillights, debadged fenders, gunmetal gills, gunmetal tailgate (CAMARO)

04-19-2012, 09:10 PM	#7
firefighter1 Drives: 625 rwhp red jewel ss COTW 11-8-10 Join Date: Oct 2009 Location: Abilene, Texas Posts: 824	That's why my contact cement didn't work! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: LS3 Camshaft Install (a lot of pictures, may take a moment to load)	robertway	Camaro DIY & HOW-TO instructions & discussions	313	12-16-2023 06:53 PM
DIY : Install headers on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	70	06-25-2020 06:40 PM
Install of new Pioneer AVH-P3300BT with painted black Metra kit	Darth Martel	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	50	09-13-2011 08:50 AM
DIY : Install catback on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	3	08-09-2009 04:36 PM

02-22-2012, 01:46 PM	#3
CooG RIP - Convertible SS Drives: '13 Mustang Boss 302 - RED Join Date: Apr 2011 Location: Houston, TX Posts: 960	If you want to make sure you don't get any air bubbles and can move & position it like you want it, you can install it like the vinyl rally stripes are installed. Lightly spray area with spray bottle filled with water and few drops of dish washing soap. Lightly spray the back of the sticker. Position sticker where you want it. Squeegie the water out starting in the middle. TA-DA!!

02-24-2012, 01:26 AM	#5
TAG UR IT www.Camaro5store.com Drives: 2014 ZL1 #705 Join Date: Jul 2006 Location: SA, Texas Posts: 26,558 View My Garage	Yup. The clear with white thermal transfer camaro5.com stickers are a bit more difficult. That is why I like the die cut stickers. They are so much cleaner. If it's the circle 5 sticker that someone is trying to apply, we've found that they are a bit difficult to remove from the actual paper. You might need a sharp razor to pick up a side of the sticker (be careful not to cut it) to get it started. Once you do that, it comes off.