06-13-2016, 09:33 AM | #1 |
Drives: 2011 Camaro SS Join Date: Sep 2013
Location: Thompson station tn
Posts: 48
|
Brake duct bracket for 3d printing
Salivations!
So I've been running brake ducts for track day cooling, similar to kit found here: http://www.jdpmotorsports.com/quantu...aro-ss-13430cp The hose really needed some support as it was rubbing on the splash guard and tearing, flopping around and limiting air flow. I shortened the hose a bit and printed a bracket that works well. You can view photos and download the .stl file for printing yourself if you have a 3D printer. http://www.thingiverse.com/thing:1623885
__________________
|
06-13-2016, 10:46 AM | #2 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
That a bitchin part right there.
Do you need it for both sides?? Most folks don't have a printer but I'm sure you could make a few bucks in your spare time making them!!!
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
06-21-2016, 04:43 PM | #3 |
Drives: 2010 2ss red LS3 Join Date: Aug 2011
Location: perkasie pa
Posts: 533
|
IF you are selling them, I'll buy a pair!
__________________
Pedders Pace Car Kit with ZL1 sway bar conversion & camber bolt kit.Lowered 1.5". 1LE tires & wheels. CAI air intake. Anvil CF rear spoiler.MGW shifter. 1 7/8" Kooks LT headers & HF cats.V-Max ported TB. Tuned.
|
06-21-2016, 06:18 PM | #4 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Nice setup.
|
06-21-2016, 06:41 PM | #5 |
Got mine!
Drives: 2021 LT1 RS - Orange Crush Join Date: Mar 2011
Location: Fallbrook, CA
Posts: 1,298
|
Cool (no pun intended, ha!)... good job!
__________________
Camaro lover since 1984 when I got my first car a 1978 Camaro LT with a 2 barrel carb on 305 V8... yes I put in a 350 with a 4 barrel.
|
06-22-2016, 09:18 AM | #6 |
Drives: 62 Chevy & 2021 1SS/1LE manual Join Date: Aug 2010
Location: Kentucky
Posts: 893
|
hey JB, its DJ. did you get the trans fived or was it just hot? we are having a cook out the friday eve before chin. we might even drink a cold beer!!! you are invited.
|
06-23-2016, 07:45 AM | #7 |
|
Nice work, that is brilliant. I need that! My duct came apart on the highway because it was rubbing and I haven't had time to fix it. Something like this would help greatly.
__________________
Used Racing Brake 2 Peice Rotors for sale:
http://www.camaro5.com/forums/showthread.php?t=344754 Summit White 2014 2SS 1LE Recaros, NPP exhaust, Nav 2010 2SS A6 - sold. |
|
|
|
|