06-29-2010, 06:27 PM | #1 |
Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008
Location: Driving
Posts: 362
|
hp tuners on camaro
so what exactly are you hptuner guys doing to a 2010 camaro ss? I have a 2ss/rs mn6 and my roommate just got the beta version of hptuners and all weve done so far is disabled my rear o2 dtcs. What are you guys doing about timing or fuel, or anything else really
__________________
IOM 2ss/rs mn6. ADM CAI, stainless works 2'' headers, stock catback. lots to come
12.68@113.67 |
06-30-2010, 07:29 AM | #2 |
Account Suspended
Drives: 2006 Corvette Z06 Join Date: Feb 2010
Location: St. Louis, MO
Posts: 587
|
Uh, you dial them in according to what the engine needs... There's typically one way to dial in an engine calibration.
I'd suggest that you and your friend read up on the HP Tuners forum. |
06-30-2010, 04:07 PM | #3 |
Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008
Location: Driving
Posts: 362
|
yea we have been. im just wondering if theres anything special about these camaros
__________________
IOM 2ss/rs mn6. ADM CAI, stainless works 2'' headers, stock catback. lots to come
12.68@113.67 |
07-01-2010, 07:33 AM | #4 |
Account Suspended
Drives: 2006 Corvette Z06 Join Date: Feb 2010
Location: St. Louis, MO
Posts: 587
|
|
07-01-2010, 07:38 AM | #5 |
Drives: 2010 2LT Blk IOM stripes IO leather Join Date: Dec 2009
Location: New Jersey
Posts: 568
|
what about 6ers? any tuners available?
|
07-01-2010, 08:21 PM | #6 |
Drives: 2010 2SS/RS & 04 silvy Join Date: Mar 2008
Location: Driving
Posts: 362
|
we just looked at my high octane table and there isnt much timing in there. Are any guys getting alot of power with a tune on these?
__________________
IOM 2ss/rs mn6. ADM CAI, stainless works 2'' headers, stock catback. lots to come
12.68@113.67 |
07-01-2010, 08:29 PM | #7 |
Account Suspended
Drives: 2006 Corvette Z06 Join Date: Feb 2010
Location: St. Louis, MO
Posts: 587
|
There's a modifier table for the PE ratio that adds timing... so what you see in your high octane table isn't exactly what is going to happen at WOT.
|
08-13-2010, 05:10 PM | #8 |
Drives: 2010 Camaro 2SS/RS M6 IOM Join Date: Apr 2010
Location: Midvale, Utah
Posts: 268
|
I am in the same boat. I have ARH's long system, Borla S type axle back, and a CAI. I am going to use the HP software as well. I was hoping someone would have a base tune that could be shared and I could adjust accordingly for my elevation. I have looked on the HP site and there is nothing for the Camaro. Maybe this is too much to ask for but worth a try.
|
08-13-2010, 05:26 PM | #9 |
Account Suspended
Drives: 2006 Corvette Z06 Join Date: Feb 2010
Location: St. Louis, MO
Posts: 587
|
People aren't usually willing to share tunes, and the stuff in the repository is questionable, at best. Do you have a wideband?
|
08-13-2010, 05:38 PM | #10 |
Drives: 2010 Camaro 2SS/RS M6 IOM Join Date: Apr 2010
Location: Midvale, Utah
Posts: 268
|
No, I don't have a wideband. Is this necessary?
|
08-13-2010, 06:32 PM | #11 |
Drives: Camaro SS Join Date: Dec 2009
Location: TX
Posts: 193
|
Yes for WOT Tune, when you have it installed be sure it will be before the Cats, do not do the same mistake that I did.
__________________
2010 Black/Black SS RS M6, ARH headers, Hi-flow cats w/x-pipe, Fastlane CAI, Livernois Camshaft 2C, SLP 160 Stat, SLP underdrive pulley, Hurst, Eibach lower spring, BMR lower control arms, BMR toe rods, Razzi body kit and Borla axle back. Tuned by me HPT.
|
08-13-2010, 06:33 PM | #12 |
Drives: Camaro SS Join Date: Dec 2009
Location: TX
Posts: 193
|
I have noticed that .
__________________
2010 Black/Black SS RS M6, ARH headers, Hi-flow cats w/x-pipe, Fastlane CAI, Livernois Camshaft 2C, SLP 160 Stat, SLP underdrive pulley, Hurst, Eibach lower spring, BMR lower control arms, BMR toe rods, Razzi body kit and Borla axle back. Tuned by me HPT.
|
09-17-2010, 02:22 PM | #13 |
Drives: 2000 Sebring Silver Z28 Join Date: Mar 2010
Location: McKinney, TX
Posts: 66
|
We tune it just like we would any other LSx vehicle. There is nothing unique to the Camaro that hasn't been in place since the early LS1 days. Some of the tables in the computer are a bit different and there is more to adjust but the method is the same.
If you're interested in tuning, then I suggest attending one of the tuningschool's beginners classes before starting to hack into the computer of your new car. |
09-18-2010, 06:53 AM | #14 | |
Drives: 2010 Shelby GT500 Join Date: Jul 2010
Location: peoria, il
Posts: 425
|
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs! | RPI Designs | Cosmetics and Lighting Modification Discussions | 36 | 04-02-2020 05:32 PM |
Installation Camaro Needed for Manual for a Justice Install Package in SF Bay Area | Info@PeddersUSA.com | USA - California | 6 | 04-30-2010 08:02 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |