07-09-2016, 08:08 PM | #1 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Replace strut bumpers and insulators?
Hey everyone,
I am replacing my struts (104k on them), it is time! Do I also need to replace the bumpers and insulators? Also, I am just getting factory strut replacements from GM parts direct, no fancy coil overs for me.
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-09-2016, 09:59 PM | #2 |
Drives: 2011 RS Join Date: Apr 2011
Location: Florence New Jersey
Posts: 1,125
|
WOW! I replaced mine at 60,000. You got your monies worth from them. I would replace everything, just to be safe. The insulators, you mean the boot? You'll find that the original boots will be compacted from use. The little bump stop pieces should be OK. Makes sure you get new top pieces, I forget what that's called, they get creeky.
|
07-10-2016, 01:59 AM | #3 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Let make this easy, here is the link, you tell what numbers I should replace!
http://www.gmpartsdirect.com/auto-pa...omponents-scat
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-15-2016, 01:17 PM | #4 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
bump
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-15-2016, 01:28 PM | #5 |
Camaro: A Legend Reborn!!
|
1, 8, 4, and 10
__________________
[SIGPIC][/SIGPIC] |
07-15-2016, 01:54 PM | #6 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Front
10 - Upper Mount / Bearing 8 - Bump Stop 7 - Boot if torn 5 Upper Insulator - There was a running change made. To make ceratin the upper front spring insulator fits the new mount, replace it. Are you doing the rear as well? |
07-15-2016, 03:25 PM | #7 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Yes, I am also doing the rears. Why does #10 Upper Mount/Bearing need to be replaced?
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-15-2016, 04:39 PM | #8 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
In the rear, replace the bump stop and I would also suggest the upper mounting plate. The rubber bushing the strut mounts to has been known to pop out of place. As long as it is apart, replace it so you know you are good for another 100,000. I am speaking as a shop owner. We want thee caar to be trouble free when it leaves. The other side of that is our shop rate is $110.00. It is almost always cheaper to do the job complete once than have to do it twice. |
|
07-15-2016, 04:41 PM | #9 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
07-15-2016, 06:18 PM | #10 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Thanks Pete, I do appreciate the advice. It there a way for me to tell if the Mounts/Bearing needs to be replaced before they are removed?
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-15-2016, 07:39 PM | #11 | |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
Quote:
At 100K, mt guess is 75% they are good and 25% bad. |
|
07-15-2016, 07:56 PM | #12 |
Drives: 2010 Camaro 2LT V6 Join Date: Jul 2009
Location: California
Posts: 439
|
Thanks Pete. I am asking because ideally I would replace it all, money is a bit tight right now. For my car, I have never tracked or autocrossed. Just spirited street driving thanks to your bushing inserts!
__________________
Injen CAI, V-Max Throttle Body, Rx 25mm Iceolator, Rx 10mm Plenum Spacer, Mace Ported Manifold, ARK N-II Catback, Trifecta Tune, Rx Catch Can.
BMR Bushing Inserts,Pedders Radius Rod Inserts, Pfadt Sway Bars and Endlinks, LSR Front Subframe Brace SS Brembo Brakes, Racing Brake Stainless Lines |
07-15-2016, 08:31 PM | #13 |
Drives: Camaro Justice Join Date: Jun 2007
Location: Virginia
Posts: 20,174
|
|
|
|
|
|