06-11-2023, 03:13 PM | #1 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 38
|
what goes here
I changed the valley pan on my l99 to a ls3 and I can not remember what if anything goes in this threaded hole, its on the back passenger side on the china rail.
__________________
2011 Camaro 2SS Victory Red
Rotofab CAI, 160 Thermostat, Stainless Works Headers, Livernois Motorsports Thunderstorm Exhaust, GPI SS1, rodmod intake, ported tb by GPI, Remote Tune by GPI, Elite Engineering Catch Can, Rotofab washer relocation, JRE scoop, JRE Trans dipstick, BMR Toe Rods, BMR Trailing Arms, BMR subframe connectors, Polyurethane diff bushing and rear cradle mount's, RSM front crash bar |
06-15-2023, 05:50 PM | #2 |
Drives: 2010 Camaro 2SS L99 Join Date: Apr 2023
Location: Olympia, WA
Posts: 444
|
Not sure how helpful but I found this pic I took after removing my intake manifold an eternity ago, guessing it's just an unused hole, at least on the L99.
__________________
Behind every scratch is a story on what not to do, and my car has a lot of stories.
|
06-15-2023, 06:05 PM | #3 |
|
Sorry, I thought it was the vent holes but I believe they're actually on the heads.
|
06-15-2023, 06:43 PM | #4 |
Drives: 2010 Camaro 2SS L99 Join Date: Apr 2023
Location: Olympia, WA
Posts: 444
|
I just spent some time trying to find a picture of the engine block from the back side, which I guess is not that common, everyone likes the front pictures, but found this image on this thread (https://www.camaro5.com/forums/showthread.php?t=448785) doesn't look like the hole leads anywhere at least, looks to me like an engine appendix, a leftover from design phase that probably did something at some point. But I'm a geologist by trade not a mechanic.
__________________
Behind every scratch is a story on what not to do, and my car has a lot of stories.
|
06-15-2023, 08:57 PM | #5 |
|
Just a guess, but maybe it’s a mount for the wire loom
|
06-17-2023, 06:11 AM | #6 |
Drives: 2011 Camaro ss Join Date: Sep 2021
Location: Michigan
Posts: 38
|
Ok thanks guys I am just going to put a bolt in there to plug it just for piece of mind.
__________________
2011 Camaro 2SS Victory Red
Rotofab CAI, 160 Thermostat, Stainless Works Headers, Livernois Motorsports Thunderstorm Exhaust, GPI SS1, rodmod intake, ported tb by GPI, Remote Tune by GPI, Elite Engineering Catch Can, Rotofab washer relocation, JRE scoop, JRE Trans dipstick, BMR Toe Rods, BMR Trailing Arms, BMR subframe connectors, Polyurethane diff bushing and rear cradle mount's, RSM front crash bar |
07-17-2023, 09:16 PM | #7 |
Drives: 2014 1ss camaro Join Date: Jul 2017
Location: missouri
Posts: 704
|
look at the casting . it goes nowhere. could be an extra ground point
|
07-18-2023, 07:55 PM | #8 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,294
|
And I can't really tell, but it doesn't even look like it is threaded. Just looks like a possible locating hole for something?
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
|
|
Thread Tools | |
|
|