04-30-2015, 05:25 PM | #7295 |
Drives: 69 Camaro and 92 RS Join Date: Feb 2013
Location: Iowa
Posts: 180
|
Anybody interested in a HPDE (High Performance Driving Experience) at Road America this Saturday? My buddy is selling his spot for Saturday for $200. That will save you 30%
FYI, HPDE/PDX events are not timed and have strict passing rules to make it safe for all cars to go fast, have fun, and not have any issues with contact between cars. You let faster cars pass you in passing zones, and slower cars let you pass in passing zones. Very safe and VERY FUN!!! It's not a race but a opportunity to get on a track and drive like a you are racing. Here is a link to the event info, top of page 6, user fox90 is him. http://www.midwestdomestics.org/show...pen!!!!!/page6 You can also message me and I'll put you in contact with him if your interested.
__________________
There are 3 ways to do any project. Good, fast, and cheap. You can only choose two.
If it's done good and fast, it isn't going to be cheap. If it's done good and cheap, it isn't going to be done fast. If it's done cheap and fast, it isn't going to be good. |
05-01-2015, 02:51 PM | #7296 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
I don't know about you but between all my mods which includes a VMax PTB and a tune, my throttle response is already pretty good. I feel like the Vitesse module would make it a pain to drive.
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
05-01-2015, 04:29 PM | #7297 |
Drives: 2010 Camaro 1SS Join Date: Mar 2015
Location: Iowa
Posts: 536
|
I was thinking the same thing lol. Think ill just put the money towards a TSP under drive pulley
__________________
Mod List: Perma-Grin, Darkened tail lights, ZL1 3rd break light, JW Motorsports LED side markers, American Authorities Window Louver, American Authority ZL1 bumper,
11/30/17 | Club F1FTY |
05-02-2015, 05:20 PM | #7298 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
So, finally took some time away from work and hit the test and tune autocross at Osky today. I'm hooked!! What a blast! Can't wait for tomorrow! I really can't wait til I get my driving skills better. I'm pretty rough around the edgesDid a 180 on the 2nd to last run and killed a couple cones!! The guys where a great help in slowing me down to get faster. So glad I finally got to put the BMR suspension to the test.
__________________
|
05-04-2015, 08:33 AM | #7299 |
Drives: 1977 Type LT Rally Sport Join Date: Sep 2013
Location: West Des Moines
Posts: 32
|
Just a reminder the cruise to Bethany, MO is on May 16th. Those in central Iowa meet at McDonalds/Kum and Go at George M Mills Civic Parkway and I-35. We will leave no later than 10 am. Let's hope for some good weather, here and in Kansas City so we have good attendance from both directions. We will meet the Kansas City club at Camaros which is East of the interstate roughly a quarter mile.
I have usually taken my black and white Camaro but this year I might take another car. Cruising the entire way above 3000 rpm is not great on the engine and definitely not on my pocket book. |
05-04-2015, 09:37 AM | #7300 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
Solid plan!
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
05-04-2015, 10:08 AM | #7301 |
|
Why does it cruise on such high RPM?
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
05-04-2015, 10:09 AM | #7302 |
Drives: 2013 AGM 1SS/RS LS3 Join Date: Mar 2011
Location: Cedar Falls, Iowa
Posts: 1,581
|
I'm going to assume the 3 speed transmission. My 1976, even with the 3.08 gear, would cruise hwy speeds at 3000-3500rpm.
__________________
2013 Camaro 1SS/RS - Ashen Gray Metallic
| LS3 | CAI Inductions, Inc Intake | Vmax Ported Throttle Body | Dynatech 1.875" Long Tube Headers | Apex Scoop & Washer Bottle Relocation | Lethal Racing Night Fury Cam | BTR 7.400" Push Rods |LS2 Dampener | Melling 10296 Oil Pump | IWIS Chain | BTR .660" Dual Valve Springs | BTR Trunion Upgrade Kit | Lethal Racing Tuned | Anvil Notch Spoiler | BMR Split Drop Springs | Eaton TrueTrac | GM 3.91 Gears | LPW Diff Cover | Rohana RF2 275/40 20x10F 315/35 20x11R | BMR Polyurethane Motor Mounts |
05-04-2015, 10:12 AM | #7303 |
|
Sunday May 17th is Cruisin for Camp Courageous. Registration 0800 to 1200 and open to general public 1000 to 1600. Hoping to have my throttle body back and tune fixed by then. http://www.campcourageous.org/?page_id=759
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8 full exhaust, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, MM can, GFX, Subs, B&M Deep transmission pan,
Holley fuel rail, Proform valve covers, relocated coil packs |
05-04-2015, 10:59 AM | #7304 |
Drives: 1977 Type LT Rally Sport Join Date: Sep 2013
Location: West Des Moines
Posts: 32
|
My camaro cruises at high rpm due to 342 gears, low profile tires and a three speed automatic. The car scoots at low speeds. Drinks gas at high speeds, 12 mpg on the highway. On the other hand I can pass cars easily. I never have to downshift to pass.
|
05-04-2015, 06:39 PM | #7305 | |
Drives: Livernois Motorsports 2010 2SS/RS Join Date: Feb 2012
Location: Iowa
Posts: 445
|
Quote:
Going to miss the Camp Courageous this year.... RE: I was a lucky to get an accepted invite to the ********* Premiere at Belle Island the same weekend (Saturday) and have my Camaro with-in the Camaro Corral Been "HRD_WRK" level detailing the heck out of my Camaro! |
|
05-04-2015, 11:12 PM | #7306 |
"1/LE Rebel Alliance"
Drives: 18 Black 1SS 1LE “Siouxsie Join Date: Nov 2013
Location: Johnston, Iowa
Posts: 324
|
Who's going to be at Karl's on May 9th? I'll be back in the area.
|
05-05-2015, 08:01 AM | #7307 |
Drives: 2010 Camaro 2SS/RS L99 "The Reaper" Join Date: Jan 2014
Location: Cedar Falls, Ia
Posts: 44
|
Guppies Car Show is this Sunday in Tripoli, Iowa. Registration from 8-11:30. Voting from 12-2. awards at 3. I plan to attend
__________________
2010 Camaro 2SS/RS, L99
MODS: Texas Speed 1 7/8" long tubes, not cats | Borla S-type catback with X pipe | K&N Typhoon intake | FBM Tune | B&M 20,000btu tranny cooler | BMR split drop lowering springs | 20" black chrome Havoc wheels | gloss black calipers | smoked tail lights | black bowties | 25% window tint | debadged Best time slip: 12.902 @107.24mph 1.964 60' |
05-06-2015, 06:32 AM | #7308 |
Drives: 69 Camaro and 92 RS Join Date: Feb 2013
Location: Iowa
Posts: 180
|
I plan to be there. My buddy I believe is bringing his ZL1.
__________________
There are 3 ways to do any project. Good, fast, and cheap. You can only choose two.
If it's done good and fast, it isn't going to be cheap. If it's done good and cheap, it isn't going to be done fast. If it's done cheap and fast, it isn't going to be good. Last edited by Obsessive Camaro Disorder; 05-06-2015 at 10:51 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Properautocare Coupon Sale for Camaro5 Members | Angelo@Autopia | Wash/Wax/Detailing and Cosmetic Maintenance Parts | 2 | 12-11-2009 09:38 AM |
STS Turbo - Exclusive Offer for Camaro 5 Members - Ends Oct 10th!!! | ZZcamaro | Forced Induction | 64 | 10-19-2009 12:16 PM |
Messages to more than 5 members & Social Groups | heinzd01 | Site Related Announcements / Suggestions / Feedback / Questions | 5 | 09-16-2009 08:22 AM |