San Diego - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

arod55 · 10-07-2011, 06:42 PM

Quote:

Originally Posted by Obzen

I've heard many good things about Ed Hansons. I havent had to use a muffler shop in years so I havent been but thats where I was gonna go last time I shopped around.

Ed Hanson's Muffler Service

3916 N Barcelona St, Spring Valley, CA 91977

(619) 698-7030

I Highly recommend Hanson's Muffler because they did my 55 Chevy many years ago and it still sound great with no problems with the workmanship.

GB EB · 10-07-2011, 07:25 PM

Quote:

Originally Posted by arod55

I Highly recommend Hanson's Muffler because they did my 55 Chevy many years ago and it still sound great with no problems with the workmanship.

had my Camaro's Borla and the Challenger's flowmasters done there.

good place.....

MARINE1991 · 10-07-2011, 07:31 PM

Quote:

Originally Posted by 2011 2SS/RS

had my Camaro's Borla and the Challenger's flowmasters done there.

good place.....

Thats right down the road from me...

MARINE1991 · 10-07-2011, 07:32 PM

Quote:

Originally Posted by Obzen

Yeah, which probably isnt me apparently,
I was thinking of my GTO where the axle backs were bolted on behind the muffler. The Camaro requires cutting. Still forget which car I drive sometimes. Whoops

s1k0 · 10-07-2011, 10:00 PM

Great will be checking him out!

tadams72 · 10-08-2011, 12:10 PM

No sweat, just throwing it out there. I would caution against welding as a properly flared and clamped pipe will work just as well and simplify removal for future upgrades. My two cents and definitely nite the only option. Good luck.

Travis
Sent from Droid Charge

s1k0 · 10-08-2011, 03:28 PM

Well, I'm not sure what the difference is between welded and clamped. I was told by another member that his were welded on and also listened to his video it sounds bad ass.
What are the differences?

Obzen · 10-09-2011, 02:47 AM

Quote:

Originally Posted by s1k0

Well, I'm not sure what the difference is between welded and clamped. I was told by another member that his were welded on and also listened to his video it sounds bad ass.
What are the differences?

It won't affect the sound one way or the other. Clamps are removable should you want to change your mufflers again. Otherwise you'd have to cut them off and have them welded again.

This:

MARINE1991 · 10-09-2011, 03:02 AM

Quote:

Originally Posted by Obzen

It won't affect the sound one way or the other. Clamps are removable should you want to change your mufflers again. Otherwise you'd have to cut them off and have them welded again.

This:

Yes never weid your exhaust... Mines been off several times for differt mods...

s1k0 · 10-09-2011, 03:38 AM

Quote:

Originally Posted by Obzen

It won't affect the sound one way or the other. Clamps are removable should you want to change your mufflers again. Otherwise you'd have to cut them off and have them welded again.

This:

Looks kinda sketchy, what are the chances of me driving home with 1 exhaust

?

If I decide to clamp them on, it would be a shame to pay more than $20's for that job.

MARINE1991 · 10-09-2011, 10:57 AM

WHY does it look sketchy that is how its done...

tadams72 · 10-09-2011, 02:56 PM

For the record, clamps are how most supermarket exhaust go in. Nothing sketchy about it. My whole system is like that on my Camaro and my truck. Trust us, you will be mad at yourself.for welding in down the road when you want to do an upgrade or repair and have to cut that welded setup out.

Travis
Sent from Droid Charge

s1k0 · 10-09-2011, 04:02 PM

Great, saw a video on the install looks easy, how much should I be paying for this job? ( calmped)

s1k0 · 10-09-2011, 10:08 PM

Failed miserably got frustrated and quit the job..

10-07-2011, 10:00 PM	#145
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Great will be checking him out! __________________ ....Oh yeah and A CIA Inc. Sold It..

10-08-2011, 12:10 PM	#146
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	No sweat, just throwing it out there. I would caution against welding as a properly flared and clamped pipe will work just as well and simplify removal for future upgrades. My two cents and definitely nite the only option. Good luck. Travis Sent from Droid Charge __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing

10-08-2011, 03:28 PM	#147
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Well, I'm not sure what the difference is between welded and clamped. I was told by another member that his were welded on and also listened to his video it sounds bad ass. What are the differences? __________________ ....Oh yeah and A CIA Inc. Sold It..

10-09-2011, 02:56 PM	#152
tadams72 When is enough ever... Drives: 2006 Silverado 2500HD CC/SB LBZ Join Date: Apr 2011 Location: Residence: Chula Vista, CA Home: Billings, MT Posts: 996 View My Garage	For the record, clamps are how most supermarket exhaust go in. Nothing sketchy about it. My whole system is like that on my Camaro and my truck. Trust us, you will be mad at yourself.for welding in down the road when you want to do an upgrade or repair and have to cut that welded setup out. Travis Sent from Droid Charge __________________ The Project: 2011 Camaro 2SS/RS (ERL 427 Superdeck NA Monster) "Just like farmer engineering. Find the weak link and fix it, then find the next one." Salt Cat Racing

10-09-2011, 04:02 PM	#153
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Great, saw a video on the install looks easy, how much should I be paying for this job? ( calmped) __________________ ....Oh yeah and A CIA Inc. Sold It..

10-09-2011, 10:57 AM	#151
MARINE1991 Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009 Location: HOMELESS Posts: 10,010 View My Garage	WHY does it look sketchy that is how its done...

10-09-2011, 10:08 PM	#154
s1k0 Drives: Corvette C6 Join Date: Jun 2011 Location: SoCal San Diego Posts: 1,225 View My Garage	Failed miserably got frustrated and quit the job.. Attached Images __________________ ....Oh yeah and A CIA Inc. Sold It..

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JIMMY JOHNSON CHEVY / SAN DIEGO / IS IT JUST ME?	GB EB	Vendor and Seller review / feedback / experiences	27	08-15-2011 10:52 AM
2011 San Diego Co. Fair: June 10 - July 4, 2011	Michael_Js	California Meets and Events	4	03-21-2011 12:35 PM
San Diego: Fred's Burgers, Alpine, Saturday 12/04/2010 5pm	DET MSCL	California Meets and Events	10	12-05-2010 11:11 AM
San Diego: Fred's Burgers, Alpine, Saturday 11/06/2010 5pm	DET MSCL	California Meets and Events	25	12-02-2010 12:47 AM
San Diego International Auto Show - 1/02/10	Michael_Js	California Meets and Events	158	01-04-2010 03:00 PM