01-21-2014, 01:37 AM | #1 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
LG motorsports axel back
SOLD
I have a pair of mufflers that normally come with the LG motorsports Cat back exhaust I replaced the axel back section only with another exhaust so this is what is left. SOLD Located in north Alabama.
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels Last edited by was619; 01-17-2015 at 10:37 PM. |
01-21-2014, 01:08 PM | #2 |
Drives: 2011 Camaro SS/RS Join Date: Feb 2011
Location: corpus christi tx
Posts: 1,046
|
3 inch?
__________________
SLP TVS 2300- 1 7/8 LG Headers- RDS NX Plate- 75 Shot- No Cats- SLP Loudmouth 2- NW102- 3.8 Pulley- OD Cog drive-12lbs boost-FIC 80# injectors-ZL1 Fuel Pump- RotoFab CAI- Apex CAI Scoop- Pat G Tune- Weld RTS drag pack- BMR Trailing Arms- BMR 1'' Drop Springs-BMR Lower Control Arms- BMR Toe Rods- BMR Rear Cradle Bushings- BMR Upper Control Arm Bushings- BMR Extreme Anti- Rollbar- Hotchkis Subframe Brace- Prosport Evo Boost & F/A Ratio
|
01-21-2014, 01:19 PM | #3 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Yes they are 3 inch inlet with about 3.5 or 4 inch tips
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
01-27-2014, 03:08 PM | #4 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Some updated pictures Also TTt
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
01-27-2014, 05:21 PM | #5 |
10-bolt Destroyer
Drives: 2012 Camaro 2SS/RS - AGM, LS3/6M Join Date: Jun 2012
Location: Canukistan
Posts: 860
|
Are the tips supposed to be that way or are they damaged?
I've never seen the LG exhaust in person before.
__________________
2012 Camaro 2SS/RS - LS3/TR6060: Cam, Headers, Exhaust, Intake, Gears, Twin Disk, Suspension, Tuned - 475rwhp, 443rwtq |
02-03-2014, 12:43 AM | #6 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
I really don't know. but If you like the sound of the mufflers than you can always cut them off and put on others, if you so choose.
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
02-26-2014, 12:22 AM | #7 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Bump
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
03-12-2014, 08:10 AM | #8 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Bump
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
03-18-2014, 10:16 AM | #9 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Bump 100 bucks
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
01-14-2015, 01:20 AM | #10 |
Billy The Kid
Drives: Cyber Grey 2SS/RS Join Date: Jun 2009
Location: North Alabama
Posts: 637
|
Ttt
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels |
01-17-2015, 06:56 PM | #11 |
Drives: Cyber Grey 2010 2SS RS Join Date: May 2012
Location: Hendersonville Tennessee
Posts: 300
|
Payment sent.
__________________
2010 2SS/RS
-Headers, catback, Holley Mid-rise and a 150 shot- |
|
|
|
|