Underhood bowtie - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

tailspin · 05-31-2010, 12:22 PM

I have seen where people are painting the bowtie under the hood. (the fabric cover under the hood). I thought I saw a thread where someone was telling how they did it. I would like to know how they do it, and if they use a certain paint.
Any help would be appreciated.
Thanks

2010 SSRS · 05-31-2010, 12:31 PM

not sure, I'll go see if I can find out

speedy_g · 06-07-2010, 01:20 PM

I'm looking for under hood billet emblem that will fit in that same spot any body know some one u sells these ...

viper1cobra · 06-07-2010, 02:23 PM

Quote:

Originally Posted by speedy_g

I'm looking for under hood billet emblem that will fit in that same spot any body know some one u sells these ...

Check Out CamaroChrome.com.

They even have SS and RS cut Outs in the BowTie.

SS Crush · 05-17-2011, 03:32 PM

Quote:

Originally Posted by viper1cobra

Check Out CamaroChrome.com.

They even have SS and RS cut Outs in the BowTie.

That site has emblems that look home-made and amateur. Emblempros does a much better job. No offense, everyone is trying to make a buck..

dragonZ28 · 05-17-2011, 05:45 PM

We have them, and customization is available.
We are also the only licensed vendor of this product.

Please let me know if we can help you out.
Here is our thread from start to finish:
http://www.camaro5.com/forums/showthread.php?t=79401

Thanks, Roger

DJBullitz · 05-17-2011, 06:04 PM

http://adamdallas.com/#/HOME-01-00/

This guy airbrushes engine and trunk. Pretty sweet looking work. Thinking about getting something just cant decide. Flat 350 to paint the inside hood.

68/2010 · 05-17-2011, 06:11 PM

Here's mine

Bay Area SS · 05-18-2011, 05:10 AM

@ 68/2010....Im usually not a big fan of billet pieces and chrome but that looks freakin awesome man!

CamaroLS · 06-05-2013, 12:07 PM

Quote:

Originally Posted by 68/2010

Here's mine

Looks good!!

Mamooth · 06-05-2013, 02:23 PM

Looks beautiful man!

dragonZ28 · 06-05-2013, 10:50 PM

Here is one we made for GM for one of the car shows.

CamaroLS · 06-06-2013, 11:36 AM

[QUOTE=dragonZ28;6635258]Here is one we made for GM for one of the car shows.

Could you make 1 with yellow trim a the stinger electronics logo in yellow in the center?

dragonZ28 · 06-06-2013, 11:43 AM

[QUOTE=CamaroLS;6636906]

Quote:

Originally Posted by dragonZ28

Here is one we made for GM for one of the car shows.

Could you make 1 with yellow trim a the stinger electronics logo in yellow in the center?

I am guessing this is a company logo?
As long as they say it is ok, then I will do it.
We have made a lot of parts with company logos on them in the past.

What I have found out, is that if you ask it is usually ok with them.
Please let me know.

Thanks, Roger

05-31-2010, 12:22 PM	#1
tailspin Drives: 2017 Camaro RS 1LT Join Date: Mar 2010 Location: Science Hill, KY Posts: 88 View My Garage	Underhood bowtie I have seen where people are painting the bowtie under the hood. (the fabric cover under the hood). I thought I saw a thread where someone was telling how they did it. I would like to know how they do it, and if they use a certain paint. Any help would be appreciated. Thanks

05-31-2010, 12:31 PM	#2
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	not sure, I'll go see if I can find out __________________ Jannetty Racing JRE Street Package

05-17-2011, 06:11 PM	#8
68/2010 Emerald Coast Camaros Drives: 2010 2SS Rally Yellow Join Date: Feb 2009 Location: TALLAHASSEE,FL Posts: 4,254 View My Garage	Here's mine Attached Images __________________

06-06-2013, 11:36 AM	#13
CamaroLS Drives: 2014 Blue Ray Met. Camaro 1SS Vert Join Date: Feb 2012 Location: Indiana Posts: 1,519	Bowtie? [QUOTE=dragonZ28;6635258]Here is one we made for GM for one of the car shows. Could you make 1 with yellow trim a the stinger electronics logo in yellow in the center? Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Emblempros.com's prototype underhood bowtie pictures	dragonZ28	Cosmetics and Lighting Modification Discussions	498	10-22-2013 12:00 AM
Underhood Bowtie	Orangeshehot	Cosmetics and Lighting Modification Discussions	4	01-04-2010 04:11 PM
Billet Bowties from ChevyMall	Angelina	Cosmetics and Lighting Modification Discussions	9	10-06-2009 11:04 AM
bowtie emblem for underhood padding	oldfart1941	Cosmetics and Lighting Modification Discussions	8	07-29-2009 06:41 AM
Underhood Bowtie	fixxer56	Cosmetics and Lighting Modification Discussions	31	02-06-2009 08:19 PM

06-07-2010, 01:20 PM	#3
speedy_g Drives: CAMARO RS V6 Join Date: Apr 2010 Location: Hoffman Estates, IL Posts: 227 View My Garage	I'm looking for under hood billet emblem that will fit in that same spot any body know some one u sells these ...

05-17-2011, 05:45 PM	#6
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,428	We have them, and customization is available. We are also the only licensed vendor of this product. Please let me know if we can help you out. Here is our thread from start to finish: http://www.camaro5.com/forums/showthread.php?t=79401 Thanks, Roger

05-17-2011, 06:04 PM	#7
DJBullitz Drives: 2011 Camaro 2SS Join Date: Jan 2011 Location: 3rd Coast, Texas Posts: 111 View My Garage	http://adamdallas.com/#/HOME-01-00/ This guy airbrushes engine and trunk. Pretty sweet looking work. Thinking about getting something just cant decide. Flat 350 to paint the inside hood.

05-18-2011, 05:10 AM	#9
Bay Area SS Drives: 2010 rs/2ss Join Date: Mar 2011 Location: ca bay area Posts: 669 View My Garage	@ 68/2010....Im usually not a big fan of billet pieces and chrome but that looks freakin awesome man!

06-05-2013, 02:23 PM	#11
Mamooth Drives: 2012 2SS/RS 6M Join Date: Jun 2012 Location: United States Posts: 109	Looks beautiful man!

06-05-2013, 10:50 PM	#12
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 2,428	Here is one we made for GM for one of the car shows.