05-09-2013, 02:30 PM | #1 |
MSG,Retired US. ARMY
Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012
Location: Germany
Posts: 233
|
Install of Oracle Marker lights
THis was an easy install. I thought it would have been harder that it was. Now all you have to do is watch a You-tube video which makes it easy in most cases.
__________________
My build site:
http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods. |
05-09-2013, 02:38 PM | #2 |
Drives: 2013 Ashen Gray M6 ZL1 Join Date: Sep 2012
Location: South Eastern, Mass
Posts: 2,615
|
Very Nice. I got the same ones and I love them! That ghosted look is awesome, they completely disappear from just a few feet back. Did ya receive the tape yet? I'm installing my Technostalgia Sequential Taillights next, well next on the to-do-list so hopefully I can get to them installed soon. Excellent Mod!
|
05-09-2013, 02:53 PM | #3 |
MSG,Retired US. ARMY
Drives: 2012 ZL1, 11 XC 90, 15 BMW 328i SW Join Date: Feb 2012
Location: Germany
Posts: 233
|
No not yet. I should be here by this time next week.
Thank you
__________________
My build site:
http://www.camaro5.com/forums/showthread.php?t=276256 2012 Camaro ZL1 #151, GCN, Dyno results 701 RWHP Mods; 2.55 Pulley, CAI, LG Cam Package Ti Springs and 9G2X Cam, RX Can, KDI Heat exchanger, Hurst shifter, Orcale Ghosted marker lights, Kooks Long tube headers with Cats deletes and Tuned by Kraftwerks, Pedders 1 inch lowering Springs, Front and rear sway bars, Rear cradle bushing, BMR Trailing arms and toe rods. |
05-09-2013, 03:29 PM | #4 |
Drives: 2013 Camaro ZL1 Convertible Join Date: Jan 2013
Location: Franklin, IN
Posts: 288
|
Hey guys, funny but I am installing the ghosted side lights and the Technostalgia Sequential Taillights tomorrow. Great minds and all that. :-)
__________________
2013 ZL1 Black Convertible
2002 Rally Red Camaro Z28 Convertible 35th Anniversary Edition 2008 Hummer H2 Ultra Marine Edition |
05-09-2013, 03:59 PM | #5 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Looks sweet!
Best regards, Tyler 888-308-6007 |
05-09-2013, 04:26 PM | #6 |
Drives: 2013 Ashen Gray M6 ZL1 Join Date: Sep 2012
Location: South Eastern, Mass
Posts: 2,615
|
You know about the battery being drained w/these taillights if you let the car sit for an extended period of time. Like a week or more you're better off connecting a battery tender. Or a power source that's powered w/key/acc. Not sure which way I'll be connecting, still undecided. But if you follow the directions you can't let the car sit for too long or its a dead battery.
|
05-09-2013, 06:21 PM | #7 |
I Carry!
Drives: 2013 CRT ZL1 Join Date: Jul 2011
Location: Fletcher, Ok
Posts: 2,722
|
looks great.
__________________
I am a Modaholic!! Please Help!! Do Not feed my addicition....See build...
http://www.camaro5.com/forums/showthread.php?t=261540 From Oklahoma, Join us on Facebook https://www.facebook.com/groups/okcamaros/ |
05-09-2013, 06:36 PM | #8 |
Ragtop Rocket!!!
Drives: Black on Black Convertible Join Date: Mar 2013
Location: San Antonio Texas
Posts: 809
|
I installed mine a couple of weeks ago. All I can say is get ready. Man they were a pain in the arse!! Keep a close eye on wires and when they don't fire in order you will have to mix and match/swap wires around till you get the order you want. I ended up with driver side working fine but when you hit right turn signal they all fired! Read some posts about people getting sent wrong wires. So I figured that was my problem also so I ended up cutting two wires and swapped them and voila!! It worked!!! Color code color code. Patience patience also. Oh BTW I figured out that the bezels are way way easier to remove if you slide a razor blade in there to hold clips open. Once you slide them in there unbolt the lights and push on the lights from the inside out and the bezels will slide out no problem. I'm me and I'll give you my number and you can call me in case you get in a pinch. Good luck guys! Oh and I haven't had any battery problems knock on wood. It just sat for 8 days while out of town and fired right up.
|
05-09-2013, 09:07 PM | #9 |
Drives: 2012 Camaro ZL1 Victory Red Join Date: Mar 2013
Location: Sudbury Ontario
Posts: 26
|
How do the side marker lights pop out?
__________________
Terry
|
05-09-2013, 10:17 PM | #10 |
America FVCK Yeah!
Drives: 2021 ZL1 1LE A10 Join Date: Mar 2013
Location: Florence, SC
Posts: 1,388
|
Sorry, but they just don't look perfect enough.......ok pure jealousy...they look F-N awesome!
__________________
1997 Z28 Anniversary Edition SOLD
2004 GTO ORDER CANCELLED 2004 CTS-V SOLD 2005 CTS-V SOLD 2006 300C SRT-8 SOLD 2006 300C SRT-8 SOLD 2010 CTS-V SOLD 2012 CTS-V coupe SOLD 2013 ZL1 vert SOLD 2016 Callaway Z06 SOLD 2019 Z06 SOLD "I lived my life by one motto.......mottos are for losers" cvp33 |
|
|
|
|