You are browsing camaro5 
 |
|
08-12-2013, 11:45 PM
|
#1 |
|
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
Night Fury Results on 91 Octane
Very disappointed in the number versus' what others are putting up. Im wondering if I got sent the wrong cam. Ive had 2 different people tune the car. It did 457whp back in TX on 93, and now it did 432whp on 91 octane. He said the car is only getting 23 degrees on the top end. I know the gas out here is crap, but when others are dynoing 480-500, I know 2 octane points isnt worth 50hp. The guy that tuned it is very respected out here and said that is average for a "medium" sized cam. I know its not all about "the number," but just not sure why my car dyno'd significantly lower than others on both tunes. I did not degree the cam during install, but think I might do it just to see what the hells in there. My mods are SP LTs (Catted), CAI, Night Fury, Magnaflow, 25% UDP. Any suggestions??
__________________
2010 Camaro SS LS3 - No Modz
|
|
|
|
08-12-2013, 11:49 PM
|
#2 |
          
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Specs on the cam? Or who makes this cam? I've only seen it on this forum
__________________
|
|
|
|
|
08-12-2013, 11:50 PM
|
#3 |
|
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
Its the Night Fury. 231/242
__________________
2010 Camaro SS LS3 - No Modz
|
|
|
|
|
08-12-2013, 11:57 PM
|
#4 | |
|
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Quote:
__________________
|
|
|
|
|
|
08-12-2013, 11:59 PM
|
#5 |
|
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
Also what dyno was it dynod in Texas and what Dyno was used this time?
__________________
|
|
|
|
|
08-13-2013, 12:10 AM
|
#6 | ||
|
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
Quote:
Quote:
TXs dyno looks to be the same, looking at the dyno sheet layout. (Not sure if different dynos have different layouts.) Its the same dyno Robert uses. (SSE 4 2SS)
__________________
2010 Camaro SS LS3 - No Modz
Last edited by 376LS3; 08-13-2013 at 12:29 AM. |
||
|
|
|
|
08-13-2013, 12:20 AM
|
#7 |
|
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
OK I understand about the specs. Did a lil digging around and seems like a nice cam. Might be just the way it was dynod, how do you feel it? Lost power or drives the same? Also the weather is pretty bad right now.
__________________
|
|
|
|
|
08-13-2013, 12:28 AM
|
#8 |
|
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
It definitely lost some pull, but I expected that on 91. I was really just hoping the TX dyno just read low and was really closer to 480, and when I got here and retuned, it would sit around 460. It was really a kick in the junk at 432. Maybe my car is one of those factory freaks, just in a negative way. LOL!!
__________________
2010 Camaro SS LS3 - No Modz
|
|
|
|
|
08-13-2013, 02:50 AM
|
#9 |
Drives: '11 Camaro 2SS/RS LS3 Join Date: Jan 2012
Location: Lexington, SC
Posts: 3,483
|
Very strange. I would have someone else take a look at the tune (Preferably Shawn @ Lethal).
__________________
 |
|
|
|
|
08-13-2013, 03:38 AM
|
#10 |
|
J.Sick
Drives: 2010 Camaro SS Join Date: Nov 2010
Location: Ardmore, OK
Posts: 958
|
Who did the tune? Since you used Loud Pedals dyno I assume NicD did the tune. I would trust what Nic says if he did the tune. Take it to the tack and see what the real gains are.
__________________
"J.Sick"
2010 Camaro 2SS Last edited by jasycz28; 08-13-2013 at 03:52 AM. |
|
|
|
|
08-13-2013, 05:30 AM
|
#11 |
|
V8 Lounge member #2
Drives: 2001 Ws6 Join Date: Sep 2009
Location: Burbank,IL
Posts: 6,373
|
Different dynos, different days, different weather, different gasoline.
Not all dynos are the same, when did you dyno 457? That's not bad. Guys are dunking 480/500 with a Lil head work done to them too. Like they said, Have you taken it to the track yet?
__________________
2001 ws6, 40k miles, Ls3 416 stroker, short block built by PER the rest by me. LPE Ls3 heads milled to 12-1 comp, FAST 102, NW 102, kooks 2", dual DMH cutouts, Magnaflow C/B, BTR cam + springs. Full UMI suspension.
|
|
|
|
|
08-13-2013, 06:05 AM
|
#12 |
|
Account Suspended
Drives: 03 vette, 94 trans am, 04 gto Join Date: Jul 2012
Location: Mesa, AZ
Posts: 995
|
Definitely not a tuner issue as that's who we use. Welcome to az my friend lol. Glad nic was able to get you in and you guys coordinate up. Nothing is wrong with your car just showing how bad our heat, gas, numbers are. We have our own cam that is honestly very similar that in good fall weather made 473 in ls3 c6 6spd. With only a Vararam, kooks 1 7/8 and off road x. No other mods at all. Your car will pick up some good power when it cools off trust me. It's not going to make 40 more rwhp but it'll gain
 Sent from my SCH-I545 using Tapatalk 2 |
|
|
|
|
08-13-2013, 09:39 AM
|
#13 | |||
|
Eh, that'll happen
Drives: 2010 2SS Join Date: Apr 2012
Location: Mesa, Arizona
Posts: 1,841
|
Quote:
Quote:
Quote:
__________________
2010 Camaro SS LS3 - No Modz
|
|||
|
|
|
|
08-13-2013, 10:01 AM
|
#14 |
|
Account Suspended
Drives: 03 vette, 94 trans am, 04 gto Join Date: Jul 2012
Location: Mesa, AZ
Posts: 995
|
Well glad she's not pinging anymore, whenever your ready to get those other goodies installed let me know
going to the pavilions sat? Sent from my SCH-I545 using Tapatalk 2 |
|
|
|
|
|
|
|
 |
|
|
