Mojave beige interior retrofit? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

monstertodd · 06-03-2013, 10:06 AM

Is it possible to retrofit a mojave beige interior into a 2010 SS?

Anyone have part numbers or have attempted to tackle this?

My Caroline · 06-03-2013, 10:53 AM

Of course it's possible. They are just seat covers. I'm not sure how you'd get them. What I would do is contact a vendor here and ask them for parts.

StangKiller-SS · 06-03-2013, 11:24 AM

Without a doubt you could do it, the seats/seat covers are going to be the most expensive. You will need a set of Mojave/dusk edition door panels for the armrests. Everything else can be purchased from a place like Maureen @ Rodgers Chevrolet, or GMPartshouse. If you need info about removal of seat covers or door panels for the armrests or console lid, There are threads on here with the step by step process.

I imagine the swap if using all brand new parts will run about $1500-$2000 and then you can recoup some of that by selling your old removed parts.

06-03-2013, 10:06 AM	#1
monstertodd Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 4,032 View My Garage	Mojave beige interior retrofit? Is it possible to retrofit a mojave beige interior into a 2010 SS? Anyone have part numbers or have attempted to tackle this?

06-03-2013, 10:53 AM	#2
My Caroline Drives: Black 2011 Camaro LS Join Date: Feb 2011 Location: Texas Posts: 1,694	Of course it's possible. They are just seat covers. I'm not sure how you'd get them. What I would do is contact a vendor here and ask them for parts. __________________ White Fender Hashes from Big Worm Graphix with Custom White Bowties GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs

06-03-2013, 11:24 AM	#3
StangKiller-SS Drives: GM products Join Date: Apr 2009 Location: USA Posts: 1,621	Without a doubt you could do it, the seats/seat covers are going to be the most expensive. You will need a set of Mojave/dusk edition door panels for the armrests. Everything else can be purchased from a place like Maureen @ Rodgers Chevrolet, or GMPartshouse. If you need info about removal of seat covers or door panels for the armrests or console lid, There are threads on here with the step by step process. I imagine the swap if using all brand new parts will run about $1500-$2000 and then you can recoup some of that by selling your old removed parts.