04-02-2014, 01:28 PM | #71 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
TD thanks for great information. Yes it helped a lot. I'll be purchasing the stock Brembo pads. I'll deal with the dust. Thanks also Matt.
Sent from my SM-N900P using Tapatalk |
04-02-2014, 02:23 PM | #72 |
ROAD COURSE JUNKIE
|
Is there any difference in clearance from the caliper to the wheel vs stock brembo's?
__________________
|
04-02-2014, 03:13 PM | #73 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
What shipping did you guys get from Amazon. I left it with the free shipping option, since it's the same as standard. I hope it doesn't take forever. I ordered two days ago and they haven't at least shipped them out yet
Sent from my SM-N900P using Tapatalk |
04-02-2014, 03:47 PM | #74 |
|
So, looking for rotor choice alternatives for this setup so I can weigh my options. Not finding much out there that's made for the ZL1.
So my question is this: will a set of rotors designed for a CTS-V fit? These are aftermarket rotors, not the one piece that came on the CTS-Vs. Just want to make sure the V's don't have some wonky design difference that's different than a ZL1 before I order. |
04-02-2014, 03:50 PM | #75 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
A lot of members used the actual cts v rotors in the 6 piston swap, so if it's designed for the cts v then it will work. But the cts v rear rotors have a different offset so we can't use cts v rear rotors from what I've read
Sent from my SM-N900P using Tapatalk |
04-02-2014, 03:54 PM | #76 |
|
Duly noted. I'll give the company a call tomorrow and see what they say, but if need be, I'll just buy ones made fore the CTS-V in the front only, then get some made for SS brakes in the rear.
|
04-02-2014, 03:57 PM | #77 | |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Quote:
Sent from my SM-N900P using Tapatalk |
|
04-02-2014, 04:04 PM | #78 | |
|
Quote:
|
|
04-02-2014, 04:11 PM | #79 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Yea they do look pretty cool. And if you can get some rear matched SS rotors it would be sweet. How much are they asking.
Sent from my SM-N900P using Tapatalk |
04-02-2014, 04:28 PM | #80 | |
|
Quote:
$201 for the rear SS rotors (pair) |
|
04-02-2014, 04:35 PM | #81 | |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Quote:
Sent from my SM-N900P using Tapatalk Last edited by C-redfly; 04-02-2014 at 04:57 PM. |
|
04-02-2014, 05:08 PM | #82 |
|
Their website says they guarantee OEM fitment. I'm sure performance isn't any better than stock but they seem decent quality and the warranty gives me peace of mind.
|
04-02-2014, 05:12 PM | #83 |
Drives: 2013 VR vert ZL1 Join Date: Aug 2012
Location: Los Angeles
Posts: 1,495
|
Yea they should be good then. I just love how massive the ZL1 rotor is. I never imagined getting them until this post and I seen the amazon price. I'm gonna wait 2 weeks before I purchase the rotors. I ordered the 6 piston calipers, pins, and pads to get that out the way, now I gotta make a decision on rotors
Sent from my SM-N900P using Tapatalk |
04-02-2014, 05:25 PM | #84 |
Drives: IBM 2SS Join Date: Jan 2011
Location: San Antonio, TX
Posts: 858
|
|
|
|
|
|