06-03-2013, 10:06 AM | #1 |
Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009
Location: Tega Cay, South Carolina
Posts: 4,032
|
Mojave beige interior retrofit?
Is it possible to retrofit a mojave beige interior into a 2010 SS?
Anyone have part numbers or have attempted to tackle this? |
06-03-2013, 10:53 AM | #2 |
Drives: Black 2011 Camaro LS Join Date: Feb 2011
Location: Texas
Posts: 1,694
|
Of course it's possible. They are just seat covers. I'm not sure how you'd get them. What I would do is contact a vendor here and ask them for parts.
__________________
White Fender Hashes from Big Worm Graphix with Custom White Bowties
GM Factory Remote Start and Factory Key Fob SS Fascia, Factory RS HIDs, Plasma P13W fog lights Non-RS to RS and fog light harness by Gen5DIY LED Interior, Trunk, and Licence Plate lights in white ZL1 Spoiler with Gen5DIY harness Factory NPP cat back Blacked out tail light bezels Factory 20 inch wheels wrapped in Nitto Motivos Lowered 1.25inch on Eibach Pro springs |
06-03-2013, 11:24 AM | #3 |
Drives: GM products Join Date: Apr 2009
Location: USA
Posts: 1,621
|
Without a doubt you could do it, the seats/seat covers are going to be the most expensive. You will need a set of Mojave/dusk edition door panels for the armrests. Everything else can be purchased from a place like Maureen @ Rodgers Chevrolet, or GMPartshouse. If you need info about removal of seat covers or door panels for the armrests or console lid, There are threads on here with the step by step process.
I imagine the swap if using all brand new parts will run about $1500-$2000 and then you can recoup some of that by selling your old removed parts. |
|
|
|
|