06-17-2016, 05:04 PM | #99 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Do you think you could snap a pic of them? I'm thinking about building something. I just can't justify $300 for Race Ramps...
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
06-17-2016, 06:11 PM | #100 | |
Drives: 2015 Camaro SS/1LE Join Date: May 2015
Location: Nevada
Posts: 947
|
Quote:
I've used Rhino Ramps for 20 years. They are 40 bucks at Wal-Mart, Home Depot and many auto parts stores. They lift about 7 inches. If I need more lift, I can easily jack the car up from there. I place a couple of 2x6's nailed together, one shorter than the other, right in front of the ramps to allow for easy drive-up. I grabbed these pics (not mine) to show the basic set-up. That'll cost about 50 bucks for the ramps and wood (and sales tax!).
__________________
2015 2SS/1LE/RECARO/NPP/RS/NAV
Last edited by PapaKlutch; 06-17-2016 at 06:12 PM. Reason: typo |
|
06-17-2016, 06:14 PM | #101 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
I'm going to have to go that route... the race ramps are nice because you can pull off the angled part and have your car on a platform.
My other option is to find a point to put the jack stand that is in the spindle area...
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
06-17-2016, 06:24 PM | #102 |
Drives: '14 1LE Join Date: Nov 2013
Location: NJ
Posts: 2,435
|
I have Race Ramps with extenders for sale if anyone's interested.
|
06-17-2016, 06:57 PM | #103 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Pics and how much? If the price is right I'm interested...
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
07-06-2016, 01:57 PM | #104 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
I bought a belly pan z28 in Germany - can someone exactly tell me what kind of screws I need to order to install that belly pan on my 2013 SS
Thank you in advance
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits Last edited by fishcop; 07-06-2016 at 02:13 PM. |
07-06-2016, 06:29 PM | #105 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Trimming
This is how I trimmed my pan to fit my 2010 with the 1LE splitter.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-06-2016, 06:30 PM | #106 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Trimming
Left side
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-06-2016, 06:31 PM | #107 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Trimming
Right side
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. Last edited by olblue75; 07-06-2016 at 06:32 PM. Reason: Forgot pic |
07-06-2016, 07:03 PM | #108 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
What year is your car again Blue?
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
07-06-2016, 09:10 PM | #109 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
2010 SS/RS with a 1LE splitter. I used body bolts from Lowes their self tapping so need for the inserts.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-06-2016, 09:20 PM | #110 | |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
Quote:
I just realized you put the car description there. I should have read better the first time.
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
|
07-06-2016, 11:54 PM | #111 |
Drives: 2015 2SS/RS 1LE, Recaros, NPP Join Date: Aug 2015
Location: Fort Worth, TX
Posts: 33
|
|
07-07-2016, 08:18 AM | #112 |
Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012
Location: Tampa by way of Miami...
Posts: 4,934
|
It looks like a Tervis Tumbler. I have a bunch of sports ones they are great. No sweat and they keep your during hot or cold.
Quick check they have Star Wars stuff. http://www.tervis.com/
__________________
My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054
|
|
|
|
|