07-07-2016, 10:17 AM | #113 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Stormtrooper
Disney Star Wars Cruise back in January...
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-07-2016, 10:18 AM | #114 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
The Same
Thinking about getting some nut plate/clips to put in those 3 holes to really tie it all down..
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-07-2016, 12:53 PM | #115 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
do you have an exact link for me ? I need to know the size of the bolt before I order... thank you
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits |
07-07-2016, 05:09 PM | #116 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
There like 3/4 inch long an maybe a 3/8 just go to Lowe an go over to the fastener section and check out there automotive hardware. 3/8 or 5/16x3/4 I think a 5/8 in length would work well to.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-07-2016, 07:32 PM | #117 | |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,210
|
Quote:
I'm looking at my receipt: -11 Insert nuts, # 11570215, use in square holes on subframe -3 clip nuts, #11517841, use these at the leading edge of the front of belly pan @ bumper cover, use existing bolts - As for the remaining bolts (11), M6x25 will work, use a flat washer with them
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
|
07-07-2016, 08:15 PM | #118 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Since his is a 2013 he'll already have the holes for the inserts which is big help..
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
07-08-2016, 04:54 AM | #119 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
Perfect ... Thank you very much - i will have a look into these gm parts !! I am quite sure that I can order it here
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits |
08-09-2016, 12:45 PM | #120 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
I found an insert nut in an online shop the picture is like this in ghe attachment - can you confirm thats the same like the insert nut?
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits |
08-09-2016, 03:04 PM | #121 |
Drives: 2022 1SS 1LE A10 BCD WCT+PDR Join Date: Mar 2008
Location: Johnstown, PA
Posts: 3,210
|
No, they are steel, though if I remember correctly, this is not exactly what they look like
__________________
2022 1SS 1LE A10 BCD WCT+PDR2014 1SS 1LE NPP RECARO SIM-SOLD1995 Z28 M6 GSC PGM-SOLD1975 NOVA COUPE 300HP 350 TH350 FLASH RED-SOLD
|
08-09-2016, 03:08 PM | #122 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
perfect thank you - this helps a lot
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits |
08-09-2016, 03:16 PM | #123 |
Drives: 2015 2SS/RS/1LE Join Date: Feb 2016
Location: NW Arkansas
Posts: 334
|
|
08-09-2016, 03:26 PM | #124 |
Drives: Camaro SS Join Date: Aug 2015
Location: Germany
Posts: 8
|
Yes but you cant buy this here in Germany - i called some gm dealer but noone could help me - now I know how they look like and this helps a lot.
__________________
2013 - IOM - 2SS - EU Version Bilstein - BBK Exhaust - Schmidt Drago Rims - ZL 1 Rockers - BCD Transformer Mirrors - Carbon Front Splitter - and lots of fun without Speedlimits |
08-09-2016, 03:31 PM | #125 | |
Drives: 2015 2SS/RS/1LE Join Date: Feb 2016
Location: NW Arkansas
Posts: 334
|
Quote:
The problem is that I knew what I needed, but all the parts images for that number show a generic part which looks completely different. Finally I just ordered the number and hoped for the best and they were correct. |
|
12-17-2017, 09:24 AM | #126 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
Resurrecting an older thread here. Been thinking about adding a belly pan to my 2014 1LE daily driver to see if it will help keep some of the road grime out of the engine compartment, did any of you notice a difference with that?
As far as aero stability, did adding the belly pan throw anything out of balance that you needed to offset? Thanks for any input. Last edited by larry_g; 12-17-2017 at 12:39 PM. |
|
|
|
|