V1 with Savy and V1 connection - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

charlietuna · 04-03-2015, 04:06 PM

I was looking for some advice about installing all of this together. It appears that I must use the OBD port for Savy and that would power the v1. With v1 connect installed as well where do you recommend I mount it?

I have a blendmount on the way and I know the mirror tap is out. So for those of you that have elected to run the flat power cable up or along the headliner and down the A pillar what advice or tips on installing do you have. I don't want to mess anything up and hate rattles.

Thanks

charlietuna · 04-11-2015, 11:48 AM

does anybody have a like for the a piller removal to run the wire I dont want to mess anything up

CameronG63 · 05-15-2015, 08:49 AM

I have a V1 and also use radar projector, which also plugs into OBDII. The flat cable tucks nicely under the headliner and pillar without having to remove anything. Pop off the door sill, the piece by the dead pedal and the fuse cover and you'll be able to route the cable and secure it to prevent rattles.

04-03-2015, 04:06 PM	#1
charlietuna Drives: 2013 ZL1 Join Date: Jul 2012 Location: Chicago, IL Posts: 1,342 View My Garage	V1 with Savy and V1 connection I was looking for some advice about installing all of this together. It appears that I must use the OBD port for Savy and that would power the v1. With v1 connect installed as well where do you recommend I mount it? I have a blendmount on the way and I know the mirror tap is out. So for those of you that have elected to run the flat power cable up or along the headliner and down the A pillar what advice or tips on installing do you have. I don't want to mess anything up and hate rattles. Thanks __________________ Laus Deo

04-11-2015, 11:48 AM	#2
charlietuna Drives: 2013 ZL1 Join Date: Jul 2012 Location: Chicago, IL Posts: 1,342 View My Garage	does anybody have a like for the a piller removal to run the wire I dont want to mess anything up __________________ Laus Deo

05-15-2015, 08:49 AM	#3
CameronG63 Drives: 2013 AGM ZL1, Porsche 914, '81 GMC Join Date: Feb 2012 Location: Conroe TX Posts: 60 View My Garage	I have a V1 and also use radar projector, which also plugs into OBDII. The flat cable tucks nicely under the headliner and pillar without having to remove anything. Pop off the door sill, the piece by the dead pedal and the fuse cover and you'll be able to route the cable and secure it to prevent rattles.