03-06-2016, 03:30 PM | #1 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
anyone installed a transmission and or oil cooler on the ss
Anyone install these and have good mounting locations
|
03-11-2016, 09:22 PM | #2 |
Drives: 2010 Camaro SS Join Date: Jan 2015
Location: Valencia
Posts: 1,305
|
Here's my transmission cooler install
|
03-15-2016, 03:40 PM | #3 |
BOHIC
Drives: 2010 Camaro SS "Enola" Join Date: Jun 2014
Location: Winter Springs, FL
Posts: 562
|
Here's mine
__________________
What else can I do to my Camaro?
|
06-29-2016, 07:49 AM | #4 |
Drives: 2011 convertible 2ss/rs Join Date: Sep 2015
Location: Houston
Posts: 971
|
Nicccce thxs
|
02-23-2019, 09:24 AM | #5 |
Drives: 2012 LS2 Join Date: Jun 2016
Location: Puslinch
Posts: 11
|
If someone is fouling around with a tranny cooler could you type in the diameter of the transmission lines so I can get started ordering AN fittings.
My car's in storage and even the dealer couldn't tell me or the only transmission shop around didn't know. Plus if anyone with better knowledge on coolers could tell me if this cooler I got kicking around which is a stacked plate 15-Row cooler but only with 3/8" npt fitting openings. worth putting in? or get one with a 1/2" npt fitting openings. Thanks in advance for any help |
02-23-2019, 09:42 AM | #6 |
Drives: 02 Camaro B4C Join Date: Nov 2016
Location: Cape May County NJ
Posts: 749
|
I went with this one.
https://www.phastekperformance.com/2...ion-cooler.htm Might not be as big as what you are looking for. The nice thing about it is it uses the factory style connections to connect to the existing trans cooler lines. I wasn't impressed by the mounting brackets so I made my own.
__________________
A man's garage is his castle
1969 Camaro SS 1970 Camaro SS 2002 Camaro B4C 2014 Camaro SS Dedicated Track Car 2015 Camaro 1SS 1LE 2008 HHR SS 1996 Silverado Crew Cab Long Bed Dual Rear Wheel |
02-23-2019, 07:21 PM | #7 |
|
They all will require some type of bracket fabrication FYI.
__________________
Car mods: never enough!
|
02-23-2019, 08:42 PM | #8 |
'It's an experiment'
Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014
Location: Dallas TX
Posts: 8,688
|
__________________
747 RWHP 794 RWTQ
"Horsepower sells cars, torque wins races." - Enzo Ferrari See My Build: http://www.camaro5.com/forums/showthread.php?t=385577 |
02-23-2019, 09:41 PM | #9 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
Remove the crash bar, gives a lot more room. I have a trans cooler, oil cooler and 4 core heat exchanger in front of my radiator.
|
|
|
Thread Tools | |
|
|