Broken Car Again - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

speeflo · 07-18-2009, 10:06 AM

maybe im calling it the wrong thing, but its the right rear shaft that comes from the rear differential into the hub or whatever on the car, it definately is threaded, when u looked at the face of the broken shaft it had a star shaped burr right in the center of the sheared shaft and a small burr on the out side edge aswell, not sure if it was maybe a casting issue

i took it to the dealer this morning gunna look at it monday, me and him was talking youd think you could give this car hell and it should bounce right back, its not like its a modded car, bone stock 900 miles and cant handle its own power,

power adders will definately find week points in the drivetrain especially if stock power can

hb-rocks · 07-18-2009, 10:10 AM

post pictures

speeflo · 07-18-2009, 10:20 AM

if i get back over to dealership ill snap a picture

orangeinfernoman · 07-18-2009, 04:44 PM

Quote:

Originally Posted by speeflo

no grease that i can see, on the cv shaft it broke right after the 1st thread other end is still attached to car...

whats to hard on a car?

on the right side of the car where the cv joint broked?

camaro5 · 07-18-2009, 05:45 PM

baileyrx · 07-18-2009, 05:47 PM

Quote:

Originally Posted by speeflo

if i get back over to dealership ill snap a picture

ooooo, dont say SNAP

camaro5 · 07-18-2009, 05:49 PM

or - awww snap!

2SSJIM · 07-18-2009, 06:00 PM

Wow! Weird that this is happening to you! I've got 900 miles on mine and I've gotten on it a couple of time barking the tires shiftimg into 2nd and I haven't had a single mechanical issue yet! It must be limited to your car..... I hope!

07-18-2009, 05:45 PM	#19
camaro5 Drives: X-15 Velocipede Join Date: Mar 2008 Location: SW Florida Posts: 4,637	__________________ Go from the presence of a foolish man, when thou perceivest not in him the lips of knowledge General Motors ASEP, A.S. Automotive Technology, Telecommunications Specialist, CISCO Network Engineer STANDARD DISCLAIMER camaro5 is furnishing this information "as is". camaro5 does not provide any warranty of the information whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the information will be error-free.

07-18-2009, 05:49 PM	#21
camaro5 Drives: X-15 Velocipede Join Date: Mar 2008 Location: SW Florida Posts: 4,637	or - awww snap! __________________ Go from the presence of a foolish man, when thou perceivest not in him the lips of knowledge General Motors ASEP, A.S. Automotive Technology, Telecommunications Specialist, CISCO Network Engineer STANDARD DISCLAIMER camaro5 is furnishing this information "as is". camaro5 does not provide any warranty of the information whatsoever, whether express, implied, or statutory, including, but not limited to, any warranty of merchantability or fitness for a particular purpose or any warranty that the contents of the information will be error-free.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Washing/Detailing for Newbies	MRK III Z28	Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection	125	02-05-2024 09:55 PM
Winner, winner - Jalopnik compares the Big 3	Number 3	5th Gen Camaro SS LS LT General Discussions	31	04-17-2011 03:24 PM
What's considered a Muscle Car?	SyN	General Automotive + Other Cars Discussion	125	09-25-2010 12:04 AM
Trip report: Picking up my IOM on 4th of July weekend.	NYG71	5th Gen Camaro SS LS LT General Discussions	33	07-17-2009 06:42 PM
2010 Chevy Camaro SS Indy 500 Pace Car Drive	linkwpc	Camaro Photos \| Spyshots \| Video \| Media Gallery	0	05-23-2009 09:47 PM

07-18-2009, 10:06 AM	#15
speeflo Drives: Chevy 2500 Join Date: May 2009 Location: South Posts: 97	maybe im calling it the wrong thing, but its the right rear shaft that comes from the rear differential into the hub or whatever on the car, it definately is threaded, when u looked at the face of the broken shaft it had a star shaped burr right in the center of the sheared shaft and a small burr on the out side edge aswell, not sure if it was maybe a casting issue i took it to the dealer this morning gunna look at it monday, me and him was talking youd think you could give this car hell and it should bounce right back, its not like its a modded car, bone stock 900 miles and cant handle its own power, power adders will definately find week points in the drivetrain especially if stock power can

07-18-2009, 10:10 AM	#16
hb-rocks Drives: Chevy Join Date: Jun 2007 Location: HB CA Posts: 567	post pictures

07-18-2009, 10:20 AM	#17
speeflo Drives: Chevy 2500 Join Date: May 2009 Location: South Posts: 97	if i get back over to dealership ill snap a picture

07-18-2009, 06:00 PM	#22
2SSJIM Drives: 2012 CRT ZL1 #1400 Join Date: Apr 2009 Location: AZ. Posts: 942	Wow! Weird that this is happening to you! I've got 900 miles on mine and I've gotten on it a couple of time barking the tires shiftimg into 2nd and I haven't had a single mechanical issue yet! It must be limited to your car..... I hope!