04-28-2014, 10:12 AM | #1 |
2010 2SS/RS M6
Drives: 2010 2SS/RS M6 Join Date: Jun 2010
Location: Auckland, NZ
Posts: 1,482
|
19" wheels on a 2010 SS?
I am looking to put some matching 19" wheels on all 4 corners of my 2010 SS, but have heard there are possible clearance issues with with "rollerskates" on the front.
Who here has a 19" wheel installed without modifying? The next challenge would be finding the correct offset to correspond to a 10" wide wheel. I've seen several who successfully use a +35 on a 20x10. Would I be able to do a +40?
__________________
2/7/2014: 419 hp, 419 tq
Cosmetic: ZL1 front w/mailslot, painted stripes, powdercoated SS rims, tow hook, and full chrome delete Suspension: Pfadt subframe bushings, Pfadt rear UCA bushings, Z28 Upper control arms, Spohn trailing arms with BMR trailing arm & differential bushings, ZL1 Toe Rods and springs, Prothane radius arm inserts & steering rack bushing, Pfadt Sport front sway, FE4 conversion w/ DS rear sway, Pfadt strut brace Drivetrain: RMCR tune, CAI intake, Kooks headers, hi-flo cats & exhaust, VMAX TB, ZL1 fuel pump, LSR Tri-Ax shifter Bumblebee Racecar Build |
05-01-2014, 08:46 AM | #2 |
2010 2SS/RS M6
Drives: 2010 2SS/RS M6 Join Date: Jun 2010
Location: Auckland, NZ
Posts: 1,482
|
<crickets>
__________________
2/7/2014: 419 hp, 419 tq
Cosmetic: ZL1 front w/mailslot, painted stripes, powdercoated SS rims, tow hook, and full chrome delete Suspension: Pfadt subframe bushings, Pfadt rear UCA bushings, Z28 Upper control arms, Spohn trailing arms with BMR trailing arm & differential bushings, ZL1 Toe Rods and springs, Prothane radius arm inserts & steering rack bushing, Pfadt Sport front sway, FE4 conversion w/ DS rear sway, Pfadt strut brace Drivetrain: RMCR tune, CAI intake, Kooks headers, hi-flo cats & exhaust, VMAX TB, ZL1 fuel pump, LSR Tri-Ax shifter Bumblebee Racecar Build |
05-01-2014, 09:12 AM | #3 |
Drives: 2011 Camaro SS/RS 2SS Join Date: Oct 2013
Location: here
Posts: 591
|
......sorry, no help.
|
05-01-2014, 09:19 AM | #4 |
B.O.D. 02/16/10
Drives: 2010 SGM Sp. Edition 2017 RS Conver Join Date: Jun 2010
Location: Albia,Iowa
Posts: 3,959
|
GM 19" will fit rear and clear the Brembos. Fronts I don't know if you cut the roller skates off if they will fit w/o spacers.
__________________
|
05-01-2014, 10:12 AM | #5 |
Drives: 1-800-428-8355 X4664 Join Date: Sep 2010
Location: rudy@tirerack.com
Posts: 1,186
|
Only a few 19's will work with the brake dampers. If you cut them off or go to aftermarket pads it will open up the options for more 19's but you may have a little brake chatter.
|
|
|
Thread Tools | |
|
|