BBK intake code !! Help! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ddunerider · 03-22-2010, 10:50 PM

Ok just intalled my BBK intake ...Disconnected the battery ,Changed the intake and now I have a code on the DIC roll down drivers window and the roll up ?? I do that and nothing happens WTF and the windows dont work right when i close them !! help

TripleB · 03-22-2010, 11:08 PM

roll whatever window it's telling you to roll down...hold it the whole time and count to 2 or 3 then roll it back up holding it the whole time and count to 2 or 3. should clear it. i had mine do this for the first 2 weeks i owned the car...and it did it every friggin time i got in the car. the only thing that sucked (cause it's not too big of a deal) was that it rained a shit ton those two weeks...and also it happened after i washed it!!

when i installed my bbk cai, i didn't disconnect the battery btw...i know the directions said to, but the video didn't mention it and i followed that.

TripleB · 03-22-2010, 11:09 PM

oh, and get in with the door closed when you roll them up/down. if need be, roll it down a bit so the door closes and you don't break the window. roll it up and start from the beginning by rolling down, holding, rolling up, holding.

ddunerider · 03-22-2010, 11:22 PM

Quote:

Originally Posted by TripleB

roll whatever window it's telling you to roll down...hold it the whole time and count to 2 or 3 then roll it back up holding it the whole time and count to 2 or 3. should clear it. i had mine do this for the first 2 weeks i owned the car...and it did it every friggin time i got in the car. the only thing that sucked (cause it's not too big of a deal) was that it rained a shit ton those two weeks...and also it happened after i washed it!!

when i installed my bbk cai, i didn't disconnect the battery btw...i know the directions said to, but the video didn't mention it and i followed that.

Fixed!! thanks buddy...

You were right!!

TripleB · 03-22-2010, 11:37 PM

no problem!

SS Drifter · 03-22-2010, 11:43 PM

FYI, before disconnecting the battery it's a good edea to open both door first. That way the windows are rolled down slightly and they won't rub when you open & close the door before doing the reset described above.

ddunerider · 03-23-2010, 01:14 AM

Quote:

Originally Posted by SS Drifter

FYI, before disconnecting the battery it's a good edea to open both door first. That way the windows are rolled down slightly and they won't rub when you open & close the door before doing the reset described above.

Now you tell me...

Thanks for the info!!

thesnoopster · 03-23-2010, 08:51 AM

Dune my man.... Im glad you got it fixed.... wehn I installed my Roto-Fab, I didnt disconnect my battery, and i have no problems. But you good to go now!!

Iwantone2 · 03-23-2010, 09:15 AM

Quote:

Originally Posted by ddunerider

Now you tell me...

I'm sure he meant well...at least now we know for next time

ddunerider · 03-23-2010, 09:20 AM

Quote:

Originally Posted by Iwantone2

I'm sure he meant well...at least now we know for next time

I know he did ..But you would think the directions would tell you to do that first before you start just incase??

03-22-2010, 10:50 PM	#1
ddunerider So-Cal Race team!! Drives: Tahoe LTZ,2010 2SS/M6 Camaro Join Date: Apr 2009 Location: Phillips Ranch ca. So-Cal Posts: 5,973 View My Garage	BBK intake code !! Help! Ok just intalled my BBK intake ...Disconnected the battery ,Changed the intake and now I have a code on the DIC roll down drivers window and the roll up ?? I do that and nothing happens WTF and the windows dont work right when i close them !! help __________________ WE RACE DEEP!! BBK Intake, Flowmaster AT cat back Barton shifter,Painted stripes,,Heritage grill,LED DRLs, Smokin Tires!! Last edited by ddunerider; 03-22-2010 at 11:02 PM.

03-22-2010, 11:08 PM	#2
TripleB SoCal Mayhem Drives: 2017 2LT Hyper Blue Metallic Camaro Join Date: May 2009 Location: Lakewood, California Posts: 5,918 View My Garage	roll whatever window it's telling you to roll down...hold it the whole time and count to 2 or 3 then roll it back up holding it the whole time and count to 2 or 3. should clear it. i had mine do this for the first 2 weeks i owned the car...and it did it every friggin time i got in the car. the only thing that sucked (cause it's not too big of a deal) was that it rained a shit ton those two weeks...and also it happened after i washed it!! when i installed my bbk cai, i didn't disconnect the battery btw...i know the directions said to, but the video didn't mention it and i followed that. __________________

03-22-2010, 11:09 PM	#3
TripleB SoCal Mayhem Drives: 2017 2LT Hyper Blue Metallic Camaro Join Date: May 2009 Location: Lakewood, California Posts: 5,918 View My Garage	oh, and get in with the door closed when you roll them up/down. if need be, roll it down a bit so the door closes and you don't break the window. roll it up and start from the beginning by rolling down, holding, rolling up, holding. __________________

03-22-2010, 11:37 PM	#5
TripleB SoCal Mayhem Drives: 2017 2LT Hyper Blue Metallic Camaro Join Date: May 2009 Location: Lakewood, California Posts: 5,918 View My Garage	no problem! __________________

03-23-2010, 08:51 AM	#8
thesnoopster Drives: '17 Fifty SS - '18 Traverse Redline Join Date: Jul 2009 Location: Northern Virginia Posts: 3,616	Dune my man.... Im glad you got it fixed.... wehn I installed my Roto-Fab, I didnt disconnect my battery, and i have no problems. But you good to go now!! __________________ 2017 Camaro SS -"FIFTY" Mods: "93 Octane"

03-22-2010, 11:43 PM	#6
SS Drifter Drives: 2010 2SS/RS L99 Join Date: Nov 2009 Location: California Posts: 588	FYI, before disconnecting the battery it's a good edea to open both door first. That way the windows are rolled down slightly and they won't rub when you open & close the door before doing the reset described above.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
K&N Typhoon intake	Bogey99	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	33	02-12-2015 11:16 AM
BBK Headers for V6 2010 Camaros! PHASTEK Performance	Sean@Phastek	V6 Bolt-Ons & Tunes	157	03-28-2012 10:20 AM
BBK Performance Parts Opens up to Camaro5.	2010SSRSM6	Camaro Photos \| Spyshots \| Video \| Media Gallery	9	03-04-2010 08:24 PM