05-06-2016, 03:17 PM | #1 |
"Cam Only"
|
FS: OEM 1LE front and rear sway bars
Selling OEM 1LE front and rear sway bars off of a 2013 1LE with very few miles on it.
These have just been sitting in my office for a year, never have gotten around to installing them. I'd rather just sell them. Looking to get $250 local pickup. Or buyer pays shipping. I accept paypal. Can be delivered anywhere between Santa Barbara to Calabasas.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
05-10-2016, 12:43 PM | #2 |
Drives: 2013 Camaro 2lt RS Join Date: Apr 2015
Location: long Beach
Posts: 364
|
Will those work on a V6 without brembos? Thanks
__________________
|
05-10-2016, 02:28 PM | #3 |
|
I'm thinking you may not have the correct lower control arms, but I'm not 100% sure. If you look at your lower control arms, If the sway bar link mounts on the outside of the strut, close to the wheel it would work. If your sway bar links are on the inside of the strut it won't.
Edit: The front should be fine, the rear is the one that would be different.
__________________
|
05-10-2016, 02:34 PM | #4 |
Drives: 2013 Camaro 2lt RS Join Date: Apr 2015
Location: long Beach
Posts: 364
|
I will take a look . Thanks
__________________
|
05-10-2016, 10:03 PM | #5 |
"Cam Only"
|
Let me know
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
05-12-2016, 05:40 PM | #6 |
So-Cal Race team!!
Drives: Tahoe LTZ,2010 2SS/M6 Camaro Join Date: Apr 2009
Location: Phillips Ranch ca. So-Cal
Posts: 5,973
|
I want just the rear...I'm next in line
__________________
WE RACE DEEP!!
BBK Intake, Flowmaster AT cat back Barton shifter,Painted stripes,,Heritage grill,LED DRLs, Smokin Tires!! |
11-22-2017, 06:28 PM | #7 |
"Cam Only"
|
Bump. Still got them sitting in my office. Want them gone.
__________________
2013 AGM Camaro 2SS/RS M6 | LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger | Pfadt Suspension, 1LE Sway Bars | DSS 1000hp axles |
Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno) |
|
|
|
|