07-15-2010, 07:10 PM | #15 |
Banned
|
excellent ,,,this is very interesting, but are there vid with dyno #'s and verification?
|
07-15-2010, 07:42 PM | #16 |
Drives: 2009 ZR1 Join Date: Nov 2009
Location: Columbus, OH
Posts: 651
|
|
07-18-2010, 06:53 PM | #17 |
Banned
|
bump...excellent!!!!! this pretty much is gonna help me make my choice...thanks jeff...kudos
|
07-21-2010, 03:05 PM | #18 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Just Remember this is Jeff at IPS post so it sways his way
|
07-21-2010, 03:20 PM | #19 |
Banned
|
ok i agree...so make your won post or chart...its an open forum...as a consumer i want the best choice and product...match or exceed him, and they will come. I think we all agree on this.. I will go turbo 99% convinced now i just want the best bang for the buck
|
07-21-2010, 08:27 PM | #20 |
Drives: 2009 ZR1 Join Date: Nov 2009
Location: Columbus, OH
Posts: 651
|
|
07-27-2010, 01:58 PM | #21 |
Banned
|
all the vendors should post their videos with , dyno numbers and repeated runs....also ait, real time, psi readings, the works...i think i speak for all members when i say we want to make an informed choice...its not all about numbers, sum people prefer a lil less power, and then their is cost and engine reliability concerns etc.
|
07-28-2010, 12:42 PM | #22 |
Dont H8 Me Cuz U Aint Me
Drives: 2016 SS Sedan, 2017 Explorer Sport Join Date: Feb 2010
Location: Tulsa, Oklahoma
Posts: 2,910
|
No additions to the graph recently huh?
__________________
|
07-28-2010, 02:26 PM | #23 |
Banned
|
|
07-28-2010, 05:15 PM | #24 |
Drives: 2009 ZR1 Join Date: Nov 2009
Location: Columbus, OH
Posts: 651
|
Nothing new no. I have one PM to respond to but to protect the authenticity of the chart I am not going to add anything or "Up" power numbers without a graph being posted or certain additions being added to the manufacturers website. In other words, I don't want somebody to say "Oh yes, we include xyz too" if they don't include it in their kit description or break-down.
Jeff PS -- Kits like the STS I just don't have any of the info to fill in and have not been contacted about doing so. |
07-28-2010, 06:31 PM | #25 | ||
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Quote:
Hellions claim to fame is great customer service and SS 439 material. They say 439 is better because it is more impervious to corrosion. AHHHH OK but 439 is a ferritic stainless steel designed to resist corrosion in a variety of oxidizing environments from fresh water to boiling acids. This is titanium stabilized, chromium alloy and not intended to exceed 1200 degrees. That does not mean you can’t do it but how many of us drive 140 mph on 118mpg rated tires? No one really crashes and burns but would you want to keep doing it? NO IPS created a comparo and even after speaking with our staff they still posted what they wanted to. That is why we chose not to get into anymore shoot outs with them. Granatelli focus’s on real power numbers, we don’t tell people they should be making 795hp on a stock motor, understanding it can be done, but so what it is not a good idea and the customer should not be told otherwise. We say do it right or don’t do it at all. We sell our kits standard with PTE6265 65lb/hr turbos. That gets you instant power from 450 to 1300 based on your boost. Our quality, fit and finish has sold itself for 70 years. We are the same people that designed the famed Novi 2000, the first and only 1000hp 50 State Legal blower when we owned Paxton Superchargers. We are also the same company that has consistently produced the most 1000 hp plus 97-2010 Corvette turbo systems with our partners at TTi, 80% of the Mustangs that race, regardless of ¼ mile, top speed, road course or otherwise all use brackets designed or fashioned by or after our design. We have been known for setting the standard to which other are measured and we pride ourselves on that. We do offer Turbonetics turbos to those that want Turbonetics. Our material is T-321 but most don’t know what that is so we say 304 because it is the catch fraze material of choice. In fact, T321 material is highly nickel based and intended to withstand 1500 degree temps for hours on end. We don’t honk our own horn and brag about stuff that has little to no bearing on your 2010 Camaro because we try to stay focused on the facts at hand. However, since everyone is going that direction, here is our hand built turbo kit on a 320 c.i. engine using T321 header material So bang for buck. We are not the most expensive and we are not teh cheapest - we just feel we offer the best practical twin turbo kit for the Camaro Gen 5. Most have agrred so far. If there is someone out there that feels we are running the wrong turbos (we are not) we are more then happy to accomodate your request and put whatever turbo you want in its place |
||
07-28-2010, 09:52 PM | #26 | |
Banned
|
Quote:
|
|
07-28-2010, 10:12 PM | #27 | ||
Banned
|
Quote:
|
||
07-29-2010, 08:21 AM | #28 | |
Drives: 2009 ZR1 Join Date: Nov 2009
Location: Columbus, OH
Posts: 651
|
Quote:
http://www.turbotechnologyinc.com/site/ the items in question are not pictured or mentioned in the write-up. I am not going to tell the people depending on the chart to be factual and fair things "Somebody said" without confirmation it is accurate. Show me something like this: http://www.ipsmotorsports.net/produc...oducts_id=4309 so the customer knows exactly what is included and what is not. If TTi has it on their site then I will edit the chart right away. I have no "Agenda" with the chart other than combining all the information into one place. As long as it comes off the manufacturers website or if it is dyno information posted with a graph on here that is good enough for me Last edited by IPSjeff; 07-29-2010 at 10:08 AM. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: 2000 Twin Turbo Camaro SS | fredl11 | Autos For Sale / Wanted | 8 | 02-06-2012 02:11 AM |
Do you want the Z28? | ChrisB | Camaro ZL1 Forum - ZL1 Specific Topics | 1616 | 09-04-2010 11:49 PM |
Anyone Interested in a Turbo Kit or headers? | VegasSilverbird | USA - Southwest | 12 | 05-06-2010 09:55 AM |
Group Buy - Turbo Kit | ZZcamaro | Forced Induction | 32 | 11-30-2009 12:52 PM |