01-10-2014, 06:30 PM | #1 |
Drives: 2013 ZL1 Victory Red Join Date: Oct 2011
Location: Puerto Rico
Posts: 22
|
Zl1 ground clearance after pothole
About 2 weeks ago I landed on a huge pothole which damaged the right front tire, rift front rim, strut and strut mounting plate. All parts were replaced at the dealer. I don't know if it's me but I notice the distance from the front splitter to the ground higher than before. It is about 6 inches from the ground and just in case no spacers on the springs. Any ideas?
|
01-10-2014, 06:58 PM | #2 |
H-Town Camaro Club Member
Drives: 17 Hyper Blue Metallic KLR-ZL1 Join Date: May 2009
Location: Pearland Tx.
Posts: 2,035
|
Measure on both side to see if left is the same as right. If not then take it back because something else is wrong. Strut mounting plate perhaps.
__________________
|
01-10-2014, 07:13 PM | #3 |
Drives: 2013 ZL1 Vert Auto IOM Join Date: May 2012
Location: Alberta
Posts: 389
|
Yeah, incorrect part, installation, defective part, or possibly the difference in height between an old/new one, but I doubt that, you paid for the work, so take it back and have them deal with it !
|
01-10-2014, 08:04 PM | #4 |
Drives: 2013 ZL1 Victory Red Join Date: Oct 2011
Location: Puerto Rico
Posts: 22
|
Left side (unaffected) Right side (affected) Looks about the same. I don't know. Maybe it has always been that way. What is the stock ground clearance? |
01-10-2014, 08:18 PM | #5 |
|
About the same ?
It's exactly the same 6"1/8 , the optical difference is from the position you took the two pictures , the first one , the camera is at the same elevation as the bottom of the splitter , while on the second , it is below it , taking the picture from a lower point , looking up tend to give a impression of a bigger / taller anything , including measurements |
01-10-2014, 09:12 PM | #6 |
Drives: 2013 ZL1 Victory Red Join Date: Oct 2011
Location: Puerto Rico
Posts: 22
|
You are right. Exactly the same. But is that normal? Can some of you measure your zl1 front splitter to ground to get an idea of what it should be.
|
01-10-2014, 09:46 PM | #7 |
Drives: 2014 Z/28; 2014 Ram 2500 CTD Join Date: Jan 2014
Location: DFW-Fairview
Posts: 498
|
It look fine to me and measures the same on my car.
|
|
|
|
|