02-07-2015, 01:07 PM | #1 |
|
Alignment/ pulling
So my alignment seemed to be off a bit. When I had the wheel straight it pulled to the right quite a bit. Took it to the dealer to get the alignment done and once they were finished, it was pulling literally twice as bad and I regret even taking it lol.
Either they don't know what they are doing or there is a different issue going on.. I am running a staggered set up with new perelli PZero's. I plan on switching wheels (driver side to passenger and passenger to driver) to see if it still pulls in the same direction. Any other suggestions? Thanks
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
02-07-2015, 01:48 PM | #2 |
Dimitri
Drives: 68 GTO 455 Ram Air; 2014 Camaro ZL1 Join Date: Jan 2014
Location: Novato, California
Posts: 602
|
Check your air pressure, then take it back to the dealer for him to align the car again free. He messed up somewhere and should redo the alignment free.
|
02-07-2015, 03:47 PM | #3 |
drinks virgil's
Drives: 2010 2SS M6 Join Date: Feb 2014
Location: Missouri
Posts: 448
|
I've had mine aligned twice in the year I've owned it. Both times same place, they do good work. Make sure you have a four wheel alignment done and if they have a road force balancer, have them balance the wheels with it also. Maybe the place you took it to only aligned the front wheels and not the back as well.
__________________
2010 2SS/RS M6 - CAI Intake - Borla Stinger - VTC - 3.91's
Eibach Sways - LG ZR28's - BMR Springs - 285/35 Squared |
02-07-2015, 07:42 PM | #4 | |
|
Quote:
__________________
2010 Camaro 2SS/RS | 416 LS3 | FED stage 2 heads
|
|
02-08-2015, 07:46 AM | #5 |
376 cubic inches of fun
|
Make sure you are not just experiencing pull to the right on a crowned road.
|
|
|
Tags |
alignment, pulling |
|
|