I'm looking for concaved 5 spoke wheel that won't break the bank! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

JRT · 07-22-2012, 03:26 PM

What's up fellas,

I am looking around at different wheels and I really like a clean 5 spoke concave wheel like the Vossen VVSCV3, but they are out of my price range.

I am looking at the price range of $450-500 a wheel delivered. I only want a 20" wheel with a preferred width of 10F/11R. I will accept a minimum width of 9F/10.5R with a 9.5 front being more acceptable. I want to run a 275/40 up front and a 315/35 in the rear with the tires at the body line or just over for that fat look. I DO NOT want to run spacers so the offset needs to be right.

Something with a brushed or machined face would be awesome. I did check out the Stance SC-5 and they look awesome, but they require a spacer in the rear.

Does anyone have any suggestions?
Thanks a bunch!

UF4LIFE102SS · 07-22-2012, 03:31 PM

What about the Forgestar wheel. Concave enuff?

JRT · 07-22-2012, 03:33 PM

Thanks a bunch for the reply.
I looked at those and I do not like them, plus they do not have a machined or brushed look.
Plus Forgestar's take too long to get LOL!

UF4LIFE102SS · 07-22-2012, 03:37 PM

That is true on wait.

UF4LIFE102SS · 07-22-2012, 04:09 PM

JRT · 07-22-2012, 04:14 PM

I've seen them too, not deep enough width or concave!
but, please keep them coming!

Every heard of these guys? They are 19", but they have 9.5 and 11" width in a 5x120 bolt pattern. http://avantgardewheels.com/m550.php

POWERFREAK · 07-22-2012, 04:34 PM

I've been looking too, for silver concaves...

How about these...
http://www.camaro5.com/forums/showthread.php?t=227570

UF4LIFE102SS · 07-22-2012, 04:43 PM

No. They r probally made by some BIGGER company and put their name on them. Not for sure but there are many done that way.

JRT · 07-22-2012, 04:44 PM

Well I finally found 20" CV3' on a Camaro and I do not like them after all. The spokes are to skinny.

JRT · 07-22-2012, 04:47 PM

Quote:

Originally Posted by POWERFREAK

I've been looking too, for silver concaves...

How about these...
http://www.camaro5.com/forums/showthread.php?t=227570

I'm not a fan. I think the spokes need to be a little wider at the hub and taper in.

POWERFREAK · 07-22-2012, 04:50 PM

Quote:

Originally Posted by JRT

I'm not a fan. I think the spokes need to be a little wider at the hub and taper in.

I agree. So far i like the forgestars the best. I'll probably just order them early in the winter, so i'll have them by next summer.

CausticGuy · 07-22-2012, 04:57 PM

http://www.camaro5.com/forums/showthread.php?t=227570

Burton · 07-22-2012, 06:53 PM

XO MIAMI'S http://www.camaro5.com/forums/showthread.php?t=227570 or GIOVANNA MECCA'S here http://www.camaro5.com/forums/showth...Giovanna+mecca

oldfriend · 07-22-2012, 07:19 PM

Take alook at the SCARALLO or something like that . GROUP A WHEELS

07-22-2012, 03:26 PM	#1
JRT Drives: 2011 IOM 2SS/RS Join Date: Apr 2012 Location: VA Posts: 400	I'm looking for concaved 5 spoke wheel that won't break the bank! What's up fellas, I am looking around at different wheels and I really like a clean 5 spoke concave wheel like the Vossen VVSCV3, but they are out of my price range. I am looking at the price range of $450-500 a wheel delivered. I only want a 20" wheel with a preferred width of 10F/11R. I will accept a minimum width of 9F/10.5R with a 9.5 front being more acceptable. I want to run a 275/40 up front and a 315/35 in the rear with the tires at the body line or just over for that fat look. I DO NOT want to run spacers so the offset needs to be right. Something with a brushed or machined face would be awesome. I did check out the Stance SC-5 and they look awesome, but they require a spacer in the rear. Does anyone have any suggestions? Thanks a bunch! __________________ 2011 IOM SS/RS L99 2015 Ducati Diavel Carbon Red

07-22-2012, 03:31 PM	#2
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	What about the Forgestar wheel. Concave enuff? __________________

07-22-2012, 03:33 PM	#3
JRT Drives: 2011 IOM 2SS/RS Join Date: Apr 2012 Location: VA Posts: 400	Thanks a bunch for the reply. I looked at those and I do not like them, plus they do not have a machined or brushed look. Plus Forgestar's take too long to get LOL! __________________ 2011 IOM SS/RS L99 2015 Ducati Diavel Carbon Red

07-22-2012, 03:37 PM	#4
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	That is true on wait. __________________

07-22-2012, 04:09 PM	#5
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	__________________

07-22-2012, 04:14 PM	#6
JRT Drives: 2011 IOM 2SS/RS Join Date: Apr 2012 Location: VA Posts: 400	I've seen them too, not deep enough width or concave! but, please keep them coming! Every heard of these guys? They are 19", but they have 9.5 and 11" width in a 5x120 bolt pattern. http://avantgardewheels.com/m550.php __________________ 2011 IOM SS/RS L99 2015 Ducati Diavel Carbon Red

07-22-2012, 04:34 PM	#7
POWERFREAK I.AM. Drives: 2011 2SS/RS/A6 cammed-n-whippled Join Date: Oct 2008 Location: NY Posts: 2,638	I've been looking too, for silver concaves... How about these... http://www.camaro5.com/forums/showthread.php?t=227570 __________________ NY5thgen.com

07-22-2012, 04:43 PM	#8
UF4LIFE102SS Treasure Coast Camaro 5 Drives: 2010 2 SS Join Date: Nov 2010 Location: Vero Beach, FL. Posts: 4,239 View My Garage	No. They r probally made by some BIGGER company and put their name on them. Not for sure but there are many done that way. __________________

07-22-2012, 04:57 PM	#12
CausticGuy Drives: 2010 Chevrolet Camaro SS/RS Join Date: Apr 2011 Location: Norton Shores Posts: 209	http://www.camaro5.com/forums/showthread.php?t=227570

07-22-2012, 06:53 PM	#13
Burton Upgrade fever Drives: V6 Join Date: Dec 2010 Location: Earth Posts: 257	XO MIAMI'S http://www.camaro5.com/forums/showthread.php?t=227570 or GIOVANNA MECCA'S here http://www.camaro5.com/forums/showth...Giovanna+mecca __________________ F-4E Phantom-57th AGS Phantom AMU Upgrades--RX catch can/Leather steering wheel/leather shift knob/4 pack gauge cluster/Painted stripes/Painted Bowtie's/Technostalgia tail lights/ZL1 spoiler/Painted steering wheel bezel/Painted speedometer bezel/Duel Halo's/Transformers Front Fascia Blackout

07-22-2012, 07:19 PM	#14
oldfriend Drives: Fiat 500 E Join Date: Dec 2009 Location: 32.7607/N. 16.95947/W Posts: 7,816 View My Garage	Take alook at the SCARALLO or something like that . GROUP A WHEELS