08-08-2015, 12:09 PM | #1 |
Drives: 2013 Cammed/LSA Conversion 1LE Join Date: Mar 2013
Location: Corbin, Ky
Posts: 564
|
Texas Speed 2" Longtubes rubbing against steering rack?
Is anyone else having this problem? One of the tubes is rubbing against the steering rack rubber cover and tearing a hole in it. Anyone know of a way to fix it, or is it okay to have a tad bit of rubbing?
__________________
"Livin' life in the fast lane, moving at the speed of light and I can't slow down, only got a gallon in the gas tank, but I'm at the finish line so I can't stop now"
|
08-08-2015, 04:44 PM | #2 |
Drives: 2013 camaro 1ss 1le Join Date: Jul 2015
Location: Long Island,ny
Posts: 224
|
yes i had the same issue. i talked to other people and they removed the rubber boot so i did the same.the knuckle under the rubber boot looks the same it did when i first removed the rubber boot two years ago so i dont think its an issue at all.
|
08-08-2015, 04:51 PM | #3 |
Drives: Camaro 1LE Join Date: Mar 2015
Location: Nor Cal
Posts: 489
|
I currently have the same issue after I installed my Kooks LTH. I am contemplating removing that rubber boot.
What tools did others use to remove the boot? Razor blade? Last edited by Pushrod Pete; 08-08-2015 at 05:36 PM. |
08-08-2015, 05:00 PM | #4 |
Drives: 2013 camaro 1ss 1le Join Date: Jul 2015
Location: Long Island,ny
Posts: 224
|
|
08-10-2015, 06:45 PM | #5 |
Drives: 2011 2ss blk/wht strp Join Date: Oct 2014
Location: south of houston
Posts: 446
|
mine does this texas speed.
__________________
|
08-10-2015, 06:57 PM | #6 |
Mine to and it hits the frame on passenger side
|
|
08-10-2015, 06:57 PM | #7 |
Drives: 2013 Triple Black ZL1 Join Date: May 2014
Location: Peoria Illinois
Posts: 132
|
Texas Speed ... Cut the boot off with a razor blade
|
08-11-2015, 10:35 AM | #8 |
Drives: 2013 camaro 1ss 1le Join Date: Jul 2015
Location: Long Island,ny
Posts: 224
|
Yup, mine used to hit chassis on passenger side too.Went back to installer he loosened lth bolts, pulled on the lth where it was hitting chassis as they re tightened lth and it fixed that issue
__________________
C.a.i. With air scoop, nw 102,fast 102, fast aluminum fuel rails, tsp 229/236 cam, prc 260 heads,1 7/8 lth,catless mid pipes, underdrive pulley,toyo r888 315's
|
08-11-2015, 10:58 AM | #9 |
We heated up the header and have slightly bent it twice and it still hits
|
|
08-11-2015, 11:04 AM | #10 |
Drives: 2018 ZL1 A10 Join Date: Feb 2012
Location: Harvest, AL
Posts: 262
|
2" Texas Speed - Same here. Razor
|
08-11-2015, 11:04 AM | #11 |
Drives: 2013 camaro 1ss 1le Join Date: Jul 2015
Location: Long Island,ny
Posts: 224
|
What size lth's?
__________________
C.a.i. With air scoop, nw 102,fast 102, fast aluminum fuel rails, tsp 229/236 cam, prc 260 heads,1 7/8 lth,catless mid pipes, underdrive pulley,toyo r888 315's
|
|
|
|
|