08-04-2017, 07:17 AM | #1 | |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Huron Speed Twin Turbo Kit Photos and Info!
Huron Speed Twin Turbo Kit for the 5th gen Camaro 2010-15 SS
The goal of this kit was to improve on the following areas from our old single kit. -Ease of install, bolt on and go! -No worries of heat (this kit keeps heat where heat is supposed to be on the car) -More power potential (1300+!!) -No relocating or deleting components/accessories Kit includes: -Hot-pipes to attach to OEM manifolds, Stainless .120 wall -Stainless Steel 3" Downpipes -Powder-coated Stainless cold-side Y -Powder-coated Aluminum 3" cold-side piping into Intercooler -Powder-coated Aluminum 3.5"-4" cold-side piping into TB -All required silicone couplers and T-bolt clamps -Powder-coated 3" CAI Intake Tubes -Large 4" Thick Front Mount Intercooler w/ Bolt-on Brackets -Large Fender-mounted Air-Filters up out of the way of road debris/rain/water -Custom Stainless Windshield Washer Tank w/ Pump Mount -Oil Return Pump w/ Plug and Play harness w/ built in timer -O2 extensions -Billet CNC Low-Profile Oil Drain Flanges -All required Oil Feed and Drain Fittings (No Drilling/Tapping, all bolt-on!) -All Oil Feed and Drain Lines -All required Grade-8 Hardware -(2) Downpipe blankets for additional heat management -(1) 50' Roll of Heat Wrap -Your choice of Full T4 Turbochargers w/ 3" exits from HSP/Comp, Precision, or Turbonetics! -Turbosmart Hyper-gate 45 wastegates -XS-Power BOV **LIFETIME Warranty on all piping from defects, welds, cracking, etc to the original purchaser!** Kit Features: -Fits Full T4 Turbos ranging from Billet 5858s up to Billet 7679s. This allows us to supply a very quick spooling set-up on a factory engine, up to 1300+ RWHP capability on a 427ci LSx! -Full 3" Stainless Steel Downpipes are standard, sending the exhaust back into the tunnel for easy additional exhaust attachment -Full 3" Intake piping off each turbo allows them to properly breath, along with routing into the fenders keeps the filters up high and out of the way of rain and debris to keep it daily driver friendly! -Retains all OEM accessories in their OEM Locations -Requires NO drilling/tapping for the oiling! -OPTIONAL .120 wall stainless tubular manifolds that clear 6-bolt block/head combinations! Standard kit uses your OEM cast manifolds. -OPTIONAL full 3" Stainless no-muffler exhaust out the back with large 4.5" single tips -Plug and Play wiring harness included for the oil return pump along with included O2 extensions. Timer built in! -Custom fabricated Windshield Washer tank made from stainless to be able to double as a meth injection tank if you desire! -Ability to still daily drive your Camaro SS and enjoy it just as you did stock, but with much more power on tap! No worries of heat, no worries of rain! Last edited by Huron Speed; 09-23-2017 at 08:28 PM. |
|
08-04-2017, 12:42 PM | #2 |
Looks awesome!
__________________
LS3 M6 w/ Turbonetics stage 1 turbo kit
Huron Speed twin 64's waiting to be installed |
|
08-04-2017, 01:27 PM | #3 |
Drives: 2013 Camaro SS Turbo Join Date: Apr 2014
Location: South Florida
Posts: 1,525
|
Kit looks awesome!! Huron quality is top notch I've been daily driving their single kit now for almost two and half years with no issues. Would love to upgrade to twins in the future!!
__________________
|
08-04-2017, 02:11 PM | #4 |
Drives: 2011 Camaro SS Join Date: May 2014
Location: NY
Posts: 180
|
Looks awesome. WTS TVS 2300 kit
|
08-04-2017, 04:19 PM | #5 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Thanks All! If anyone with our old single kit wants to upgrade just shoot me an email and we can work something out!
|
08-04-2017, 09:06 PM | #6 |
Drives: 2010 2SS/RS Join Date: May 2010
Location: USA
Posts: 592
|
Do the SS tubular manifolds dump exactly where the stock manifold do. Or do you have to adjust your kit for the stock mani's and then a different setup for the SS tubular manifolds?
__________________
LME built LSX427 w/t all Callies internals| AGP 65/65 TT | Holley Sniper Intake | Brodix BR3/LME custom ported | LME custom cam | Pro EFI 112 ECU | ID-1700x | NGK BR7EF | AGP's-Fore Triple Fuel pump | Monster LT1-S Triple | ZL1 3.23 diff, CF driveshaft, ZL1 axles | Hurst Line Lock | MGW Retro Short Throw | Pfadt solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Ground Control camber/caster plates | Accelerated Racing Solutions tuned| God is too good! I don't deserve it, but I sure will accept it!!! |
08-04-2017, 09:44 PM | #7 | |
Drives: 2015 Commemorative Edition Join Date: Jul 2013
Location: Holbrook NY
Posts: 285
|
Quote:
I have a single Huron kit. What can you do for me?? Sent from my iPhone using Tapatalk
__________________
2015 Commemorative Edition
Procharger D1SC - JDP ZR1 Cam - FAST LSX 102 intake, ARH , 729.7 RWHP 698 RWTQ |
|
08-05-2017, 06:39 AM | #8 | |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Quote:
Jon@HuronSpeed.com |
|
08-05-2017, 06:40 AM | #9 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
Same location for the manifolds. This will allow you to upgrade to them anytime if you end up switching to a 6-bolt head set-up that the factory manifolds will not clear and not have to change anything else on the set-up
|
08-05-2017, 09:13 AM | #10 |
Drives: 2010 2SS Join Date: Feb 2011
Location: rutland vt
Posts: 126
|
will this kit clear with a th400?
|
08-05-2017, 10:23 AM | #11 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
We have not fit it on a car with a th400 yet, but are searching for someone with a th400 equipped vehicle we can work with to test fit and if any tweaks are required to work with them on. If interested shoot me an email: jon@huronspeed.com
Our Red Camaro will be getting a 4l80e with a brake from RPM in the next few weeks so we will be confirming that combination. |
08-05-2017, 10:40 AM | #12 |
Drives: 2010 2SS Join Date: Feb 2011
Location: rutland vt
Posts: 126
|
ok thanks, i have a agp kit right now and have relocated my waste gates twice with not very good results so i may be in contact with you.
|
08-05-2017, 11:39 AM | #13 |
Drives: 2013 ZL1 Join Date: Jan 2015
Location: Orlando
Posts: 936
|
How much are the headers? Kit looks very nice
__________________
2013 A6 ZL1
|
08-05-2017, 12:24 PM | #14 |
Drives: 2012 45th SS Join Date: Sep 2010
Location: Michigan
Posts: 689
|
|
|
|
|
|