11-07-2012, 10:36 AM | #1 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
1LE front sway bar end links?
I thought I read where the 1LE front end links were different than the FE3 (stock '10 SS) front end links. I think someone mentioned they were a little thicker plus they used a 12mm bolt vs 10mm bolt.
Can someone confirm the 1LE end links are bigger. If they are and I wanted to add them to my SS I'm guess I would have to drill out the bolt whole a little to make them fit?
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
11-07-2012, 07:56 PM | #2 |
ITCRNRS
Drives: 2018 ZL1 1LE Join Date: Jun 2012
Location: Wichita KS
Posts: 1,575
|
Yes ZL1/1LE front sway bar links are 12mm I had to drill out my stock v6 struts to get them to bolt on
__________________
2018 ZL1 1LE Ordered 6/29/17 Built 11/6/17 Delivered 12/7/17, Summit White, PDR, NAV, https://www.youtube.com/c/tylerpotter
SOLD: 2014 Summit White 1LE 2SS/RS, Recaros, NPP, NAV, KONI Yellow's SOLD: 2012 Black 2LT/RS, Fully 1LE swapped, Brembo swap |
11-07-2012, 08:30 PM | #3 |
Drives: 2012 SS LS3 Join Date: Nov 2011
Location: NorCal
Posts: 818
|
The 1LE front sway bar end links are indeed bigger with 12mm bolts just as you thought.
|
11-07-2012, 08:54 PM | #4 |
Drives: One of the baddest handling Gen 5s Join Date: Feb 2011
Location: Masachusetts
Posts: 4,177
|
1LE front endlinks are same as ZL-1 front endlinks.
|
|
|
|
|