12-03-2013, 08:40 AM | #1 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Jannetty Racing Getting the Dyno Fixed
After 10 years of High Horsepower cars beating on the Rollers the Knurl has worn down to the point we can't keep cars hooked up.
Traction was being a real Problem over the last year. I thought I would share this for other dyno operators that may be experiencing the same issue. Carbonite, Welds on a Tungsten Carbide Sand paper like finish that is 8 times harder than steel so this should be a Permanent solution to Wearing out rollers. It is about a 30 Hour Process to do 18 inches of both rollers.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 12-10-2014 at 12:31 PM. |
|
12-03-2013, 10:15 AM | #2 |
|
That looks like a great solution Ted!
__________________
|
12-05-2013, 03:43 PM | #3 |
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
now that's neat! I like that idea
|
12-05-2013, 03:51 PM | #4 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Testing it now traction is at premium
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
12-05-2013, 07:31 PM | #5 |
Anabolic Connoisseur
Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010
Location: Oklahoma
Posts: 22,094
|
sweet
__________________
|
12-05-2013, 07:39 PM | #6 |
Drives: 67RS Camaro ,Black 2013 ZL1 Join Date: Jun 2010
Location: Alberta
Posts: 1,408
|
Andy.. you see this
|
12-05-2013, 07:49 PM | #7 |
Account Suspended
Drives: 03 vette, 94 trans am, 04 gto Join Date: Jul 2012
Location: Mesa, AZ
Posts: 995
|
Very nice!
|
12-05-2013, 08:48 PM | #8 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
Thats pretty cool
|
12-06-2013, 08:04 AM | #9 |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
And Man it Works.
Dyno tested the same car before and after and the torque Measured went up over 60 Ft lb, Through most of the run, which proves there was a traction problem. It was a 2014 GT500 We are building making 700 RWHP with Factory tires Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
12-06-2013, 03:33 PM | #10 |
Drives: 2x 05 Vettes/65'AC cobra/68 camaro Join Date: Apr 2009
Location: LONGVIEW, TEXAS
Posts: 845
|
man thats crazy
PM me how much this cost you if you would please |
12-06-2013, 03:45 PM | #11 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
Well Worth the investment. Ran one of my 415 Packages today and made 420 RWHP 423 RWTQ Never saw that before.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com Last edited by JANNETTYRACING; 12-06-2013 at 04:11 PM. |
|
12-06-2013, 03:46 PM | #12 |
Drives: 2SS Join Date: Sep 2012
Location: middle of nowhere
Posts: 136
|
sometimes I wish I would live in USA
Great job Ted!!! |
|
|
|
|