You are browsing camaro5 
 |
|
08-19-2010, 12:10 PM
|
#1 |
|
do you know da muffinman?
Drives: RS 2LT '10 Camaro RJT Join Date: Jul 2009
Location: DFW, TX
Posts: 37
|
Need a new clutch for the V6 manual
My OEM clutch disintegrated under 14k miles.
 I have been researching heavily for a few days now and seem to have no luck finding clutch and flywheel suggestions for V6ers like myself.Please help myself and other manual V6 drivers out there find a good replacement flywheel and pressure plates for our cars!  Thank you all, -mm |
|
|
|
08-23-2010, 03:27 AM
|
#2 |
|
do you know da muffinman?
Drives: RS 2LT '10 Camaro RJT Join Date: Jul 2009
Location: DFW, TX
Posts: 37
|
EDIT: was tired.. missed that it is specific to LS.
Howdy. I have done significant research and finally think I found a couple companies that make highly recommended products compatible with our 3.6L engine and AY-6 tranny. Monster Clutches http://www.monsterclutch.com/gm.html Hendrix Engineering http://hendrix-engineering.com/hendr...eering_002.htm Going to give them both a call Monday or Tuesday to see if they believe their products will work in our cars. Have a good one, -mm Last edited by muffinman2030; 08-23-2010 at 04:42 AM. |
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Removing Centering Springs from Stock V6 Manual Shifter | autobotaz | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 20 | 04-19-2014 06:46 PM |
| I want a new clutch, you too????? Sign here | tjbusa | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 370 | 08-10-2013 03:27 AM |
| need advice from manual v6 owners | khabboub | 5th Gen Camaro SS LS LT General Discussions | 21 | 03-02-2010 12:37 PM |
| Dyno on V6 auto and manual? | iyam_lorne | 5th Gen Camaro SS LS LT General Discussions | 0 | 09-01-2009 10:09 PM |
| Automatic faster than the manual??? | 2sharp | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 319 | 09-30-2008 09:20 AM |
