02-20-2015, 03:41 PM | #127 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
The apr piece can be fitted without a lip mine is on see if I can upload a pic
__________________
Patiently waiting for my 2023 SS 1LE |
02-20-2015, 03:42 PM | #128 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
This was before te rods were installed
__________________
Patiently waiting for my 2023 SS 1LE |
02-20-2015, 07:20 PM | #129 |
aerosportconcepts@gmail
Drives: '15 1SS-RS/1LE (RRM) Join Date: Dec 2011
Location: Menifee, SoCal
Posts: 1,387
|
What is holding the APR Extension??? How is it attached to the bottom. That doesn't seem like it would be strong enough for high speeds from what I can tell in the pictures you posted
__________________
|
02-20-2015, 07:36 PM | #130 |
Drives: 2012 2SS/RS Join Date: Oct 2014
Location: U.S.A.
Posts: 1,596
|
Yup my brother had his on without a lip too. I just ordered my APR for my ZL1
|
02-20-2015, 10:58 PM | #131 |
Hmm...Something Clever
Drives: Blac on Blaq on Blak 2012 Camaro LS Join Date: Dec 2009
Location: Charleston, SC
Posts: 413
|
Count me in as well. Been waiting for this
__________________
Adjustments: 20% tint all around, Emblem Pros Dash plaque, Rockford Fosgate P-300/12 |
02-21-2015, 12:20 AM | #132 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
The rods are attached to brackets behind the front fascia. And the bottom of the splitter is mounted to where that little air damn is under the chin of the front bumper.
__________________
Patiently waiting for my 2023 SS 1LE |
02-22-2015, 12:51 AM | #133 |
Drives: Camaro 2SS RS IBM Join Date: Jan 2009
Location: Odessa, Tx
Posts: 258
|
This group buy still going?
|
02-22-2015, 07:47 AM | #134 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Nope group buy is dead
__________________
Patiently waiting for my 2023 SS 1LE |
02-23-2015, 05:22 PM | #135 |
Drives: 2010 2LT Bumblebee Join Date: Apr 2013
Location: Maryland
Posts: 613
|
So is there a way to make it fit on the 2010 v6?
__________________
AirLift Air Suspension, Stainless Works Long Tube Headers + Hi-Flo Cats, Resonated X-Pipe, MRT V2 Mufflers, VMAX Ice-olator and Ported Throttle Body, Barton Short Throw Shifter, CAI Intake + Air Scoop
|
02-23-2015, 06:11 PM | #136 |
aerosportconcepts@gmail
Drives: '15 1SS-RS/1LE (RRM) Join Date: Dec 2011
Location: Menifee, SoCal
Posts: 1,387
|
I suppose there is a way. If the APR Extension bolts up ours would too.
Our Extension Kit comes pre - drilled but we could tell the CNC not to cut those mounting holes and let you drill your own as APR does.
__________________
|
02-24-2015, 12:05 AM | #137 |
aerosportconcepts@gmail
Drives: '15 1SS-RS/1LE (RRM) Join Date: Dec 2011
Location: Menifee, SoCal
Posts: 1,387
|
I can't guarantee that it will as I haven't had one in the shop to find out. But if the APR works I don't see a reason our wouldn't. This is probably the reason APR doesn't supply instructions on how to install theirs.
__________________
|
02-24-2015, 03:24 PM | #138 |
Drives: '14 1LS Join Date: Apr 2014
Location: Mandeville
Posts: 2,166
|
Apr supplies a a "general" installation guide. It's not the greatest but gives you an idea. However I can do a little write up on how I attached mine.
__________________
Patiently waiting for my 2023 SS 1LE |
|
|
|
|