best deal tvs 2300 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

midgard · 12-10-2010, 05:07 PM

Seriously...I needed to upgrade to the 3.6 KB from the TVS 2300...so now I have to sell my TVS 2300. I do need a new intercooler and a few other items....please contact Andy @ Livernois for that list. Hopefully, I will get a cost breakdown of the parts needed to make it a Full Kit.

I will sell what I have left for $2000!!!!!!!!!!!!!!!!!! However, since I need another intercooler and a few other items.....I'm sure those other parts will add up to another $1500-$2000. I will make this work one way or the other....if I have to bring my sale price down to $1500 I might just do that....E-mail Andy@livernoisvehicle.com to get the low down on what else needs to be purchased. It would even work out better if you had them do the install!

This TVS 2300 made a whopping 650 rwhp 630 rwtq on an A6! Now, if it had that cog drive, I'm sure it could have made more.

Less than 3,000 miles on it.
Or shoot me a PM. I'm flexible.

Prochargedchevyi · 12-10-2010, 09:02 PM

Holy moly...Seems like a great deal.

Supercharged SS · 12-10-2010, 10:19 PM

If there is anyone on this site you could buy from with 100% trust and confidence its James. He'll make sure you get taken care of and get everything you need and probably more!! There is no way you'll ever find an as new Maggie for anywhere close to this!!

camaro1 · 12-10-2010, 10:40 PM

pm sent. also the e-mail link you posted doesnt work, came back as e-mail address was not found in the recipient's e-mail system

iFast · 12-10-2010, 10:46 PM

PM'd!

midgard · 12-11-2010, 08:04 AM

Quote:

Originally Posted by camaro1

pm sent. also the e-mail link you posted doesnt work, came back as e-mail address was not found in the recipient's e-mail system

OK...I wrote a PM back.....My Bad! Andy's number at Livernois is 313 561 5500 ext 2110.....his actual e-mail is <aricketts@livernoisvehicle.com>;

On the board it is (with no spaces) Andy@Livernois.

I'm not going to make a deal with anyone until we know for sure what you will still need to get...I'm not trying to pull a fast one....I will need to have Andy give the list (and hopefully prices) of what is needed...I don't think he will be back to his office until Monday.

midgard · 12-11-2010, 08:08 AM

Quote:

Originally Posted by iFast

PM'd!

Thanks for the PM....As I mentioned to a few of the other people that PM'd....I'm still at the mercy of Andy to get a picture and the final price list together....for the parts missing.

but if anyone wants to talk or e-mail him directly...I'm not a mechanic....so, I'll let the professional give that list out...I would just end up misleading someone.

For everyone...once again...I'll sell what I have left for $1500-$2000....and the rest is up to the buyer....now...if the rest is getting up there in price, then I might lower my price a little

midgard · 12-11-2010, 08:19 AM

Quote:

Originally Posted by Supercharged SS

If there is anyone on this site you could buy from with 100% trust and confidence its James. He'll make sure you get taken care of and get everything you need and probably more!! There is no way you'll ever find an as new Maggie for anywhere close to this!!

Thanks Jamie!

BTW...to any interested buyer...if my parts don't work when you get my kit....or even after the first 6 months....just let me know...I'll return the money that I end up getting ($1500-$2000?)..no biggie.....The buyer has my word on that.

DanD · 12-11-2010, 08:39 PM

so whats actually included? the entire blower setup... just not the intercooler and???

I am thinking for a 67 camaro project... that has an ls3

midgard · 12-11-2010, 09:44 PM

Quote:

Originally Posted by DanD

so whats actually included? the entire blower setup... just not the intercooler and???

I am thinking for a 67 camaro project... that has an ls3

I'm going to need to wait until Monday to get you those items....I can't say for sure what other pieces.

camaro1 · 12-13-2010, 03:17 PM

any update?

treedoc2000 · 12-13-2010, 11:22 PM

Anything??

midgard · 12-14-2010, 06:08 AM

No update.....Andy got back from the PRI conference and was swamped....I'll write him again today....hopefully to at least release the list of parts needed (and prices too).

As soon as I get it...I'll post it here.....sorry for the delay!

Jeddler · 12-14-2010, 07:52 AM

Thanks midgard for helping me decide to keep mine by selling yours so cheap lol. Free bump for you.

Jed

12-10-2010, 05:07 PM	#1
midgard Drives: red jewel camaro Join Date: Aug 2009 Location: Northwest Indiana Posts: 524	best deal tvs 2300 Seriously...I needed to upgrade to the 3.6 KB from the TVS 2300...so now I have to sell my TVS 2300. I do need a new intercooler and a few other items....please contact Andy @ Livernois for that list. Hopefully, I will get a cost breakdown of the parts needed to make it a Full Kit. I will sell what I have left for $2000!!!!!!!!!!!!!!!!!! However, since I need another intercooler and a few other items.....I'm sure those other parts will add up to another $1500-$2000. I will make this work one way or the other....if I have to bring my sale price down to $1500 I might just do that....E-mail Andy@livernoisvehicle.com to get the low down on what else needs to be purchased. It would even work out better if you had them do the install! This TVS 2300 made a whopping 650 rwhp 630 rwtq on an A6! Now, if it had that cog drive, I'm sure it could have made more. Less than 3,000 miles on it. Or shoot me a PM. I'm flexible. __________________ 2010 Red Jewel Camaro ss/rs A6/L99 POWER NUMBERS....874 rwhp/880 rwtq!! 9.81@142.02 Livernois 2nd Place Car Camaro5 Fest Original Build 13 psi/nittos.....10.44@134 3.6KB/3.5 pulley/Stock t/b..Best 9.967@142.01 SSJ3...is done....mid 9s?Rossler 6l80E Transmission KB 3.6LC,17" Bogarts, Thanks to Hendrix 9", Thanks to Pfadt original T/b and converter, 419ci stroker (NO LSX Block) Last edited by midgard; 12-11-2010 at 08:36 AM.

12-10-2010, 09:02 PM	#2
Prochargedchevyi Drives: 2010 Camaro 2SS/RS Join Date: Aug 2010 Location: Castle Rock, Colorado Posts: 153	Holy moly...Seems like a great deal. __________________ "This house is protected by the good Lord and a gun. You'll meet both if you show up uninvited."

12-10-2010, 10:40 PM	#4
camaro1 Drives: 550+RWHP 2010 camaro Join Date: Sep 2007 Location: wisconsin Posts: 1,588	pm sent. also the e-mail link you posted doesnt work, came back as e-mail address was not found in the recipient's e-mail system __________________ 415ci stroker, TVS 2300 Magnacharger, cnc heads, cam, yank ss3200 converter, Kooks long tubes, Bwoody true cold air kit, ZL1 Pump, magnaflow 3" cat-back, lowering springs,BMR control arms and tie rod bars, 3.73 gears, diff mounts, RX can, ADM fuel controller

12-11-2010, 08:39 PM	#9
DanD Drives: 6 camaros Join Date: Feb 2009 Location: ma Posts: 320	so whats actually included? the entire blower setup... just not the intercooler and??? I am thinking for a 67 camaro project... that has an ls3 __________________ 2010 IOM RS/SS TVS2300, cam, stall, headers 2002 Z28 427 2002 SSLE Convertible 1968 383 Camaro 1968 327 Camaro Convertible 1967 RS 327 1967 Pro-Tour LS3 in progress

12-13-2010, 03:17 PM	#11
camaro1 Drives: 550+RWHP 2010 camaro Join Date: Sep 2007 Location: wisconsin Posts: 1,588	any update? __________________ 415ci stroker, TVS 2300 Magnacharger, cnc heads, cam, yank ss3200 converter, Kooks long tubes, Bwoody true cold air kit, ZL1 Pump, magnaflow 3" cat-back, lowering springs,BMR control arms and tie rod bars, 3.73 gears, diff mounts, RX can, ADM fuel controller

12-10-2010, 10:19 PM	#3
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	If there is anyone on this site you could buy from with 100% trust and confidence its James. He'll make sure you get taken care of and get everything you need and probably more!! There is no way you'll ever find an as new Maggie for anywhere close to this!!

12-10-2010, 10:46 PM	#5
iFast Drives: '10 Camaro SS/RS and '01 Bullitt Join Date: Apr 2010 Location: Back in the US!! Posts: 344 View My Garage	PM'd!

12-13-2010, 11:22 PM	#12
treedoc2000 Drives: 2010 camaro SS Join Date: Jan 2010 Location: Midland Posts: 79	? Anything??

12-14-2010, 06:08 AM	#13
midgard Drives: red jewel camaro Join Date: Aug 2009 Location: Northwest Indiana Posts: 524	No update.....Andy got back from the PRI conference and was swamped....I'll write him again today....hopefully to at least release the list of parts needed (and prices too). As soon as I get it...I'll post it here.....sorry for the delay! __________________ 2010 Red Jewel Camaro ss/rs A6/L99 POWER NUMBERS....874 rwhp/880 rwtq!! 9.81@142.02 Livernois 2nd Place Car Camaro5 Fest Original Build 13 psi/nittos.....10.44@134 3.6KB/3.5 pulley/Stock t/b..Best 9.967@142.01 SSJ3...is done....mid 9s?Rossler 6l80E Transmission KB 3.6LC,17" Bogarts, Thanks to Hendrix 9", Thanks to Pfadt original T/b and converter, 419ci stroker (NO LSX Block)

12-14-2010, 07:52 AM	#14
Jeddler Drives: 2010 Red 2SS RS A6 Join Date: Jun 2010 Location: San Angelo, Tx Posts: 150	Thanks midgard for helping me decide to keep mine by selling yours so cheap lol. Free bump for you. Jed __________________ 2013 Race Red Ford SVT Raptor: Luxury package. Stock for now. 2011 BLACK Tahoe LT 4x4: K&N 77 Series, Elite Engineering catch can 2010 RED 2SS/RS A6: SOLD!!!:( 2011 WHITE Silverado crew cab Z71 LTZ, 6.2L: SOLD!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need Help ! My Tuner can only Get 390 RWHP w/ my TVS 2300	speed racer	Forced Induction - V8	106	11-11-2010 07:42 PM
TVS 2300 - What line do i tap into	SSTony	Forced Induction - V8	12	09-19-2010 06:32 PM
G-FORCE TVS 2300 2010 Camaro w a little suprise!	Mike TexaSS	Forced Induction - V8	23	02-08-2010 10:37 PM
TVS 2300 & High Altitude	BUMBLEB	Forced Induction - V8	7	11-18-2009 06:15 PM
WHO WANTS A MAGGIE??? PACKAGE DEAL FOR THE TVS 2300 INSTALLED	east TX Muscle cars	USA - Texas	10	06-11-2009 10:26 AM