FS: Hogan Sheetmetal Intake Manifold - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Darth_Emma · 02-03-2013, 02:14 PM

SOLD!!

Hogan's Racing Manifolds custom-made LS7 sheetmetal intake manifold.

Here is the Hogan website:
http://www.hogansracingmanifolds.com

This manifold was dyno-tested and used one weekend of test and tune (at Camaro 5 Fest in Indy last year). It includes fuel rails. It is set up for direct-port nitrous injection and will work with any system with 1/16" NFT nozzles.

Fits a stock deck height block and LS7 heads.

This a beautiful piece. The plenum has been polished to a high shine and the fuel rails have been anodized black. Here are a few pictures. Also, it fits perfectly under the stock Camaro hood.

These were taken before it was polished and fuel rails anodized:

These were taken during engine assembly after it was polised and fuel rails anodized.

Here is a view of the back of the manifold taken during engine assembly.

I am selling it because we have decided to go with a different style intake manifold to go with the new drag racing heads on my car.

Asking $2950 shipped as is, or best reasonable offer.

It is off the car, all wrapped up, and ready to ship.

gml1998 · 02-03-2013, 05:44 PM

That sure is purdy.
To bad I have an LLT

Dznts · 02-04-2013, 08:22 AM

that looks awesome! GLWS!

Firefighter · 02-04-2013, 08:54 AM

I'm not in the market for this but out of curiousity what kind of numbers did this motor put out with that manifold? It's beautiful btw and GLWS.

Iroc2430 · 02-04-2013, 10:02 AM

Wish I had the money for that! Beautiful manifold.

Darth_Emma · 02-04-2013, 10:16 AM

Quote:

Originally Posted by Firefighter

I'm not in the market for this but out of curiousity what kind of numbers did this motor put out with that manifold? It's beautiful btw and GLWS.

The car was really only put through on weekend of test and tune with that manifold. It was on the dyno once. We didn't have the boost controller installed yet, so it was running on the waste gate springs. It made 850 rwhp. It would have easily gone over 1000 rwhp once we got the boost controller in and the manifold could take more boost than that I'm sure.

It's a beautiful piece.

Firefighter · 02-04-2013, 10:40 AM

Quote:

Originally Posted by Darth_Emma

The car was really only put through on weekend of test and tune with that manifold. It was on the dyno once. We didn't have the boost controller installed yet, so it was running on the waste gate springs. It made 850 rwhp. It would have easily gone over 1000 rwhp once we got the boost controller in and the manifold could take more boost than that I'm sure.

It's a beautiful piece.

Impressive... thanks for the reply.

Darth_Emma · 02-15-2013, 09:03 AM

SOLD!!

02-03-2013, 02:14 PM	#1
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	FS: Hogan Sheetmetal Intake Manifold SOLD!! Hogan's Racing Manifolds custom-made LS7 sheetmetal intake manifold. Here is the Hogan website: http://www.hogansracingmanifolds.com This manifold was dyno-tested and used one weekend of test and tune (at Camaro 5 Fest in Indy last year). It includes fuel rails. It is set up for direct-port nitrous injection and will work with any system with 1/16" NFT nozzles. Fits a stock deck height block and LS7 heads. This a beautiful piece. The plenum has been polished to a high shine and the fuel rails have been anodized black. Here are a few pictures. Also, it fits perfectly under the stock Camaro hood. These were taken before it was polished and fuel rails anodized: These were taken during engine assembly after it was polised and fuel rails anodized. Here is a view of the back of the manifold taken during engine assembly. I am selling it because we have decided to go with a different style intake manifold to go with the new drag racing heads on my car. Asking $2950 shipped as is, or best reasonable offer. It is off the car, all wrapped up, and ready to ship. Last edited by Darth_Emma; 02-16-2013 at 09:21 AM.

02-04-2013, 08:22 AM	#3
Dznts Anabolic Connoisseur Drives: Sold - Blown Camaro 2SS/RS LS3 Join Date: Sep 2010 Location: Oklahoma Posts: 22,094	that looks awesome! GLWS! __________________

02-04-2013, 10:02 AM	#5
Iroc2430 Smoke'm if you can Drives: 2010 Camaro 2SS/RS/LS3/M6 Join Date: Nov 2012 Location: Reno, NV Posts: 713	Wish I had the money for that! Beautiful manifold. __________________ Texas Speed LT Headers with HF Cats, Borla ATAK Exhaust, MGW Short Throw Shifter, ADM CAI with Scoop, Elite Oil Catch Can, Mishimoto Aluminum Radiator, Pedders XA Coilovers, Mantic Twin 9000 Clutch, PFADT Solid Subframe Bushings, PFADT Front & Rear Sways, PFADT Upper Control Arm Bushing, PFADT Trailing Arms/Tie Rods, Whiteline Adjustable End Links, Whiteline Adjustable Lower Control Arms, Pedders Diff Bushings, Line Lock, ACC Side Markers, ACC Reverse Lights, Custom Tune from Nitrous Express.

02-15-2013, 09:03 AM	#8
Darth_Emma Psssssssssshhhhhhhhhhhhh! Drives: under contruction Join Date: Nov 2009 Location: Marysville, Ohio Posts: 12,996 View My Garage	SOLD!! Last edited by Darth_Emma; 02-16-2013 at 09:20 AM.

02-03-2013, 05:44 PM	#2
gml1998 Drives: 2010 Synergy Green Camaro Join Date: Jun 2010 Location: Minooka Illinois Posts: 693	That sure is purdy. To bad I have an LLT

02-04-2013, 08:54 AM	#4
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	I'm not in the market for this but out of curiousity what kind of numbers did this motor put out with that manifold? It's beautiful btw and GLWS.