Socal BS Thread - Page 961 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bajamoon · 09-07-2012, 09:42 PM

Quote:

Originally Posted by GunnyG

There was a trade that didn't appear even, so Jason spoke up. He and Kronix (John) had a lengthy disagreement. So, it was canceled. #1 pick overall traded for less value, and well...you know how cars, egos, money, and sports go. That was that pretty quickly. LoL

Lol oh well no fantasies for you

Sent from my phone using tapatalk.

90503 · 09-07-2012, 10:02 PM

Back from Ruby's....back again early tomorrow...lol

glc55 · 09-07-2012, 10:54 PM

What car show is scheduled tomorrow?

90503 · 09-07-2012, 10:59 PM

Quote:

Originally Posted by glc55

What car show is scheduled tomorrow?

Greg, it's at Ruby's in Redondo Beach....show starts at 9 am to 2pm...

If you wanna be in the show, I think you can just pay them the twenty bucks when you get there (you might not get a t-shirt, though)...lol...If you want to "enter" you should get there around 8 am...

VR Baron · 09-07-2012, 11:07 PM

Quote:

Originally Posted by glc55

What car show is scheduled tomorrow?

You live there now ..lol Must be the food

Spoiler is on

Center section anyway

90503 · 09-07-2012, 11:16 PM

Quote:

Originally Posted by VR Baron

You live there now ..lol Must be the food

Spoiler is on

Center section anyway

Very good...lol...Did you drill the side holes yet?...If you got it laid out, you can if you're comfortable doing it....Just that someone needs to hold the end pieces in place from the outside when they get bolted on...

VR Baron · 09-07-2012, 11:29 PM

Quote:

Originally Posted by 90503

Very good...lol...Did you drill the side holes yet?...If you got it laid out, you can if you're comfortable doing it....Just that someone needs to hold the end pieces in place from the outside when they get bolted on...

The're drilled.Even with the teplate taught, tapped and triple checked they still look a little off. But o.k., I will drill them out to full size, test fit then just elongate them so I can adust. Need the 3/8 universal I guess to tighten them, will get that tomorrow.I'll see how far I get with the wiring and not sure how you take off the backseat side panel yet to connect? May need help with that

90503 · 09-07-2012, 11:35 PM

Quote:

Originally Posted by VR Baron

The're drilled.Even with the teplate taught, tapped and triple checked they still look a little off. But o.k., I will drill them out to full size, test fit then just elongate them so I can adust. Need the 3/8 universal I guess to tighten them, will get that tomorrow.I'll see how far I get with the wiring and not sure how you take off the backseat side panel yet to connect? May need help with that

Nice...yeah, we drilled Steve's as accurately as we could...still had to open them up with a round file to get them in the right spot...You might wanna "test" the nuts for the end pieces...They had so much friggin lock-tite on them, we couldn't get them on all the way without taking them back off and chasing out the threads to get them on all the way...

VR Baron · 09-07-2012, 11:46 PM

Quote:

Originally Posted by 90503

Nice...yeah, we drilled Steve's as accurately as we could...still had to open them up with a round file to get them in the right spot...You might wanna "test" the nuts for the end pieces...They had so much friggin lock-tite on them, we couldn't get them on all the way without taking them back off and chasing out the threads to get them on all the way...

Will check it's nuts, but not to close...lol I need to drill them out to size and I will see which way they go.I know I need to "slot" them for play to position.I may need help with that panel in the backseat is it? The trunk stuff no big deal, but the instructions are as usual, lousy

Hope you or Robert win tomorrow. Would go but it would look unsightly to pull up with wiring and panels dangling out the back end...lol If I get done I'll pop over if not to late, or will see you Sunday

glc55 · 09-08-2012, 12:15 AM

Thxs Tom for the information, but hopefully I will be getting my stock spring back on my car , I need the inch back with the new front lip spoiler. Dam I have to look out for every dip in the road. You guy have fun tomorrow. Greg

VR Baron · 09-08-2012, 10:44 AM

End pcs lined up and o.k. Going to Pep boys for a swival. Done in a couple hours easy

GunnyG · 09-08-2012, 12:29 PM

Think I'm gonna take the Porsche out on a Vegas trip tonight. Just a quick turnaround, and come back tomorrow night...after football.

VR Baron · 09-08-2012, 12:54 PM

Quote:

Originally Posted by GunnyG

Think I'm gonna take the Porsche out on a Vegas trip tonight. Just a quick turnaround, and come back tomorrow night...after football.

Have fun.

MARINE1991 · 09-08-2012, 01:01 PM

Going to Vegas next Friday to Monday...

09-07-2012, 10:54 PM	#13443
glc55 Drives: 2013 ZL1 Black Camaro Join Date: Oct 2009 Location: Norwalk CA Posts: 1,110 View My Garage	What car show is scheduled tomorrow? __________________

09-08-2012, 12:15 AM	#13450
glc55 Drives: 2013 ZL1 Black Camaro Join Date: Oct 2009 Location: Norwalk CA Posts: 1,110 View My Garage	Thxs Tom for the information, but hopefully I will be getting my stock spring back on my car , I need the inch back with the new front lip spoiler. Dam I have to look out for every dip in the road. You guy have fun tomorrow. Greg __________________

09-08-2012, 12:29 PM	#13452
GunnyG Da WHALE Drives: 2014 Stingray, 2015 Panamera 4 Join Date: Dec 2011 Location: Oceanside, Ca - Originally from KCMO Posts: 8,878 View My Garage	Think I'm gonna take the Porsche out on a Vegas trip tonight. Just a quick turnaround, and come back tomorrow night...after football. __________________ Project MantaRay...Underway

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
All order status requests in here (up to status 3800). List of Order Status Codes.	GTAHVIT	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	54436	12-28-2016 08:04 AM
!!!OFFICIAL!!! SoCal Head Turners thread	leonardo	USA - California	12965	08-28-2016 11:49 AM
Suggestion: Explanation to thread starters for their threads being locked?	colin911	Site Related Announcements / Suggestions / Feedback / Questions	2	12-06-2009 10:25 PM
prices thread	nimnels	5th Gen Camaro SS LS LT General Discussions	1	05-02-2009 06:47 PM

09-07-2012, 10:02 PM	#13442
90503 Drives: 2011 2SS/RS LS3 Join Date: Nov 2011 Location: Torrance Posts: 14,417	Back from Ruby's....back again early tomorrow...lol

09-08-2012, 10:44 AM	#13451
VR Baron SoCal Camaro5 Race Team Drives: 2021 Shadow Grey Camaro 2SS 1LE Join Date: Mar 2010 Location: SO CAL Posts: 14,288	End pcs lined up and o.k. Going to Pep boys for a swival. Done in a couple hours easy

09-08-2012, 01:01 PM	#13454
MARINE1991 Drives: COTW 8/29/11 2010 CAMARO Join Date: Jul 2009 Location: HOMELESS Posts: 10,010 View My Garage	Going to Vegas next Friday to Monday...