CUSTOM FIRST AID KIT / FIRE EXTINGUISHER

[GB EB]

I was at my first car show of the year last weekend when I realized I had forgotten my first aid kit and fire extinguisher.... then I thought.... hmmmm... how can I stand out from the crowd if I DO remember them?????

this-

I'm painting them Inferno Orange to match the car... adding "First Aid Kit" and "Fire Extinguisher" decals then clear coating them...

Here is step 1:

[AdamZ]

YES! Those car shows are DANGEROUS!

[Powhusku]

Very cool. Do you know where you'll mount them yet?

[GB EB]

Originally Posted by AdamZ

YES! Those car shows are DANGEROUS!

strangely enough some car shows REQUIRE those two.

Originally Posted by Powhusku

Very cool. Do you know where you'll mount them yet?

Probably will not mount them... maybe just place them forward in the trunk during shows...... but... now you are making me think......

[bmbbl be]

mine are mounted ,,,,here is a pic

[Frid]

I wonder how many people would be asking "is that NOS?" if you didn't label it haha.

[AdamZ]

Originally Posted by Frid

I wonder how many people would be asking "is that NOS?" if you didn't label it haha.

Pft...I'd label it NOS

[Frid]

Originally Posted by AdamZ

Pft...I'd label it NOS

You don't need NOS haha. YOu have enough trouble hooking up to put the car in the garage

[GB EB]

Originally Posted by AdamZ

Pft...I'd label it NOS

funny you mention that because before I got the idea of painting my own I ordered a "hemi" orange extinguisher that IS labeled NOs. It's already on the way so I guess I'll put that one up in the front.

[PalmerGA]

Originally Posted by GB EB

I was at my first car show of the year last weekend when I realized I had forgotten my first aid kit and fire extinguisher.... then I thought.... hmmmm... how can I stand out from the crowd if I DO remember them?????

this-

I'm painting them Inferno Orange to match the car... adding "First Aid Kit" and "Fire Extinguisher" decals then clear coating them...

I hope you are going to have the extinguisher operating instructions on the repainted bottle. I know it's a fairly simple thing but there's no telling whoever uses it in an emergency would be clear-headed enough to use it properly w/o instructions. Just saying... seconds count with a vehicle fire.

[GB EB]

Originally Posted by PalmerGA

I hope you are going to have the extinguisher operating instructions on the repainted bottle. I know it's a fairly simple thing but there's no telling whoever uses it in an emergency would be clear-headed enough to use it properly w/o instructions. Just saying... seconds count with a vehicle fire.

I'll be the only one to use it... this will never be out of my sight since it's for car shows only, and I am a former shipboard firefighter.... we're good.

but.... since you put forth a valid point maybe I'll look for a decal with said instructions to lend my extinguisher more credibility......

[PalmerGA]

Originally Posted by GB EB

I'll be the only one to use it... this will never be out of my sight since it's for car shows only, and I am a former shipboard firefighter.... we're good.

but.... since you put forth a valid point maybe I'll look for a decal with said instructions to lend my extinguisher more credibility......

Sorry - no offense intended - didn't realize it was for show only (non-functional). Looks good.

[GnyaTek]

I had looked into fire extinguisher mounts for within the cabin since some race events require an extinguisher mounted within reach of the driver, but the mounts and extinguishers that I had found were running stupidly expensive ($200-300).

Since I had no intention of spending that kind of cash, I chose to make my own:







(Forgive the grubby floor and door sills, I've been running around topdown a bunch this week ... woohoo!)

Total cost of this fire extinguisher setup was around $25, with the bulk of it (about $18.50) for the extinguisher itself.

Just went to Home Depot, found an extinguisher that matched the correct criteria, a piece of aspen wood (cut down to length and roughly planed the edges), and some stainless hardware. I used some black spray paint that I already had and then sanded it down (haven't gotten around to a second coat of paint, but the bracket doesn't show even so) to get most of the paint powder off the wood (so it won't rub off on the carpet).

Simple setup, as it bolts right to existing holes in the seat rails. I am tall and so have the seat all the way back to the stops and only can move the seat forward about 1-2" without removing the extinguisher from the bracket (just pull the strap and snag it), but for shorter drivers, can just get some strap metal extensions and two more bolts and can position the extinguisher further forward.

[NYJETSFAN]

Nice location TEK, easy to get to if you need it asap