09-18-2010, 07:50 PM | #1 |
Drives: 1999 Corvette Coupe, 2007 Z06 Join Date: Sep 2010
Location: Oceanside, Ca
Posts: 237
|
All "NEW" Custom Billet Valve Covers for the Camaro Offered
Billet Custom Products LLC has released a NEW all Billet Valve Cover kit for the 2010 Camaro. These Billet covers are designed to be a “bolt on” upgrade replacement for stock GM valve covers. They are 2.3 lbs lighter than stock, and have an amazing look. They are polished to a mirror like finish, and come with everything you need to complete the installation. Detailed directions accompany the product.
Bruce at Billet Our products are new & unique. 100% Billet Aluminum is machined to exact tolerances. The Highest Quality Standards are used during manufacturing. Built in the USA. You will not need to relocate your coil brackets or purchase any other custom part to complete the installation. Everything you need is included. Your stock plug / coil wires will not need to be replaced. Other than the GM gasket you will need to purchase, no additional parts are required. The Solid 6061-T6 Billet Aluminum rectangle bar is machined to precise tolerances and then polished to a reflective finish. No spacer / standoffs are required for installation because the standoffs are built into and are a one piece construction. This product has been designed to upgrade & replace stock GM valve covers for Camaros 2010 and up, specifically designed for the LS1, LS2, LS3, LS6, LS99 and LS7 motors. The new valve cover system is "patent pending". The product is made in the USA. Included in the package: Solid Billet Valve Cover Assembly / "Direct Bolt On" Valve Covers (2) Spider Coil Bracket assemblies (4) All Required Stainless steel hardware Spacer Adapter to accommodate GM coil p/n 12573190 (16) (not required on LS1 / LS6) Oil Cap (1) Protective Wire loom set up GlipTone Aluminum Polish Sampler Included is the new Stealth "Spider" coil bracket assembly. It is designed to be used together as a complete valve cover system. You will not find this valve cover system made by anyone else. This looks like an excellent upgrade for ANY 2010+ Camaro. Those looking to have a clean unique engine compartment will appreciate this product. This product is considered a High End - High Quality upgrade. Post up anyone with any questions, discuss, etc. For ordering/purchasing, please visit the following link: http://www.camaro5.com/forums/showthread.php?t=106571 Thank you all for viewing. Last edited by Bruce at Billet; 09-19-2010 at 12:58 PM. |
09-18-2010, 08:09 PM | #2 |
Blowin the doors off!
Drives: A 2013 SS RS 6M SR Join Date: Apr 2010
Location: Phoenix, AZ
Posts: 2,390
|
NICE..These would look good with some MSD coil packs and plug wires...
__________________
2G1FS1EWXD9163847 |
09-18-2010, 08:11 PM | #3 |
Drives: 2010 Black 1SS Join Date: Aug 2009
Location: Langley BC
Posts: 666
|
ironic... was just looking at these this morning!
__________________
2010 Black 1SS LS3 M6
Power: Kook's 1 7/8" Long Tubes and 3" Exhaust, Injen Full Length CAI, Jannetty Tune Drivetrain: MGW Short Shifter, Street Slayer Twin Clutch, DSS 1 Piece Aluminum Driveshaft, DSS 1000HP Axles, BMR Pro and Delrin Diff Bushings Suspension: BMR Trailing Arms and Bushings, FE6 Swaybar Conversion With Pedders 27mm Front and 32mm Rear ZL1 Swaybars and Links Chassis: Hotchkis Chassis Max Brace, BMR Pro Cradle Bushings Exterior:: Shine by Adam's. ...and plenty more |
09-18-2010, 08:12 PM | #4 |
Account Suspended
Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,063
|
Quality! I like!
|
09-18-2010, 08:14 PM | #5 |
Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009
Location: panama city fl
Posts: 5,117
|
they would look good with the Kenne Bell also !!
|
09-18-2010, 08:14 PM | #6 |
Drives: 1999 Corvette Coupe, 2007 Z06 Join Date: Sep 2010
Location: Oceanside, Ca
Posts: 237
|
|
09-18-2010, 08:29 PM | #7 |
Dog Is My Copilot
Drives: 2011 2SS/RS LS3 Join Date: Jun 2009
Location: Pittsburgh, PA
Posts: 1,394
|
Sharp!
__________________
|
09-18-2010, 08:38 PM | #8 |
Drives: 1999 Corvette Coupe, 2007 Z06 Join Date: Sep 2010
Location: Oceanside, Ca
Posts: 237
|
Billet
Inside........tall cover.
One piece construction. |
09-18-2010, 08:46 PM | #9 |
Drives: 2016 Camaro SS Join Date: Jan 2009
Location: Rochester, NY
Posts: 529
|
That's a pretty product. Nice work !
|
09-18-2010, 08:48 PM | #10 |
Drives: '17 Fifty SS - '18 Traverse Redline Join Date: Jul 2009
Location: Northern Virginia
Posts: 3,616
|
Very Nice!
__________________
2017 Camaro SS -"FIFTY"
Mods: "93 Octane" |
09-18-2010, 09:06 PM | #11 |
Drives: 1999 Corvette Coupe, 2007 Z06 Join Date: Sep 2010
Location: Oceanside, Ca
Posts: 237
|
LS7 Installation shown here..
|
09-18-2010, 09:08 PM | #12 |
Drives: IOM 2SS RS M6 sunroof Join Date: Jul 2009
Location: panama city fl
Posts: 5,117
|
any LS3 installed pics??
|
09-18-2010, 09:16 PM | #13 |
|
those look really good
__________________
Jannetty Racing JRE Street Package
|
09-18-2010, 10:05 PM | #14 |
Drives: 1999 Corvette Coupe, 2007 Z06 Join Date: Sep 2010
Location: Oceanside, Ca
Posts: 237
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Does the v6 have enough power? | cstproductions | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 305 | 08-29-2012 09:27 PM |
Camaro Product Manager - interview | Moose | 5th Gen Camaro SS LS LT General Discussions | 11 | 04-04-2012 06:10 PM |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Official Camaro Convertible CONCEPT Press Release | Tran | Camaro Convertible Forum | 12 | 11-18-2009 07:05 PM |