REMOVE THE HURST SHIFTER FROM YOUR ORDER!!!! - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Hylton · 03-25-2009, 05:50 PM

Quote:

Originally Posted by Rodrunner

necroposting:
The act of posting in a forum thread that is too old to matter any more, or has served it's purpose. Usually by new, inexperienced members of the board.

Hey Rod - there's a new "Z is dead" thread that just started. Better get on that!

Rodrunner · 03-25-2009, 06:30 PM

Quote:

Originally Posted by Hylton

Hey Rod - there's a new "Z is dead" thread that just started. Better get on that!

Now THAT'S necroposting!!! Do ya have a link? I'll pass it on to radz282003.

Buddy, pal, you do know that Q3 runs almost to the end of September, and the cold winds could be a howling and the snows a blowing by the time you get your Hurst equipped car? Oh....I know....your way or the highway. Good luck!

Inspector 17 · 03-25-2009, 06:32 PM

Quote:

Originally Posted by Rodrunner

Now THAT'S necroposting!!! Do ya have a link? I'll pass it on to radz282003.

Buddy, pal, you do know that Q3 runs almost to the end of September, and the cold winds could be a howling and the snows a blowing by the time you get your Hurst equipped car? Oh....I know....your way or the highway. Good luck!

Get ready to skate on the river in Ottawa in September!

Rodrunner · 03-25-2009, 06:48 PM

^^^He might be ok with tire studs or chains. Ha!Ha!

Hylton · 03-25-2009, 06:57 PM

Ever seen a 400+ hp Camaro plow snow guys? No plow will have faster 1-2 shifts than me!

Tantalizer43 · 03-25-2009, 07:08 PM

Quote:

Originally Posted by Hylton

Ever seen a 400+ hp Camaro plow snow guys? No plow will have faster 1-2 shifts than me!

Hylton, I love you man!

Rodrunner · 03-25-2009, 07:13 PM

Yeah, he's never without a good reply.

jeffny09 · 03-25-2009, 07:21 PM

done alreadyyyy

Rodrunner · 03-25-2009, 07:27 PM

You da man, Jeff! What's up?

Optimus Prime · 03-25-2009, 08:16 PM

I wonder what fbodfather has to say about the Hurst option. I could certainly be wrong, but I don't recall too many comments from him on this particular issue. Perhaps there's something he knows but won't say (he's good at that

), or there's really nothing going on at the moment...

And as for me, I'm keeping it on for now. I trust my dealer will let me know when they're ready to submit my order for production, and at that time, we'll determine if I still need to remove the Hurst for my order to go through.

arozar · 03-26-2009, 06:16 AM

Quote:

Originally Posted by camaropete

You might be waiting A LONG time.

Thanks Rod.

How long? Q3, thats fine, 3 years not so cool?

DragonCamaro · 03-26-2009, 08:38 AM

I got in touch with my dealer the other day and asked if they took off the shifter when i asked like two weeks ago they didn't know so i told them to make sure and he was like you might lose your current position put should be part of the first build cycle. What the hell do they mean as far as i was told none of their orders were picked up yet. Or do they mean of their orders they have? Any ideas?

Rodrunner · 03-26-2009, 09:01 AM

Quote:

Originally Posted by Optimus Prime

I wonder what fbodfather has to say about the Hurst option. I could certainly be wrong, but I don't recall too many comments from him on this particular issue. Perhaps there's something he knows but won't say (he's good at that

), or there's really nothing going on at the moment....

You're trying to start something aren't you?

Quote:

Originally Posted by DragonCamaro

I got in touch with my dealer the other day and asked if they took off the shifter when i asked like two weeks ago they didn't know so i told them to make sure and he was like you might lose your current position put should be part of the first build cycle. What the hell do they mean as far as i was told none of their orders were picked up yet. Or do they mean of their orders they have? Any ideas?

One of us is supposed to know what your dealer means?

Sorry, but it really is quite simple for him to go into Workbench and see if the shifter is selected as an option and then delete it. And there's no reason for the priority, your position, to change from doing so. Beyond that

CamaroScotty · 03-26-2009, 10:00 AM

GM had a spec change on the part, thus a delay. (so I'm told)

03-25-2009, 06:48 PM	#18
Rodrunner Senior Member Drives: 2010 SS/RS, '06 350Z Join Date: Oct 2008 Location: So. Maryland Posts: 2,333	^^^He might be ok with tire studs or chains. Ha!Ha! __________________ 2SS/RS - Black/Black - CGM Rally Stripes - Auto - VIN 10171

03-25-2009, 06:57 PM	#19
Hylton Drives: fanboys and ass kissers crazy. Join Date: May 2008 Location: Ottawa, Ontario Posts: 7,280	Ever seen a 400+ hp Camaro plow snow guys? No plow will have faster 1-2 shifts than me! __________________ "BBOMG - More than just a car show.... It's an experience!"

03-25-2009, 07:13 PM	#21
Rodrunner Senior Member Drives: 2010 SS/RS, '06 350Z Join Date: Oct 2008 Location: So. Maryland Posts: 2,333	Yeah, he's never without a good reply. __________________ 2SS/RS - Black/Black - CGM Rally Stripes - Auto - VIN 10171

03-25-2009, 07:21 PM	#22
jeffny09 Drives: 2010 camaro Join Date: Nov 2008 Location: new york Posts: 5,618	done alreadyyyy __________________ top 10 reason why real men drive stick. 10. A manual transmission is the ultimate in control 9. You can use automotive jargon and not sound like a total tool 8. You can't spell "manual" without "man" 7. Manual transmissions prove you can do more than one thing at a time 6. You can't drift in an auto 5. You can't pull fancy moves in an automatic 4. You get better fuel economy with a stick 3. You’ll never look like a chump if you can drive stick 2. Manual transmission cars are faster 1. Women like a guy who is good with his hands.

03-25-2009, 07:27 PM	#23
Rodrunner Senior Member Drives: 2010 SS/RS, '06 350Z Join Date: Oct 2008 Location: So. Maryland Posts: 2,333	You da man, Jeff! What's up? __________________ 2SS/RS - Black/Black - CGM Rally Stripes - Auto - VIN 10171

03-25-2009, 08:16 PM	#24
Optimus Prime Drives: 2014 Chevrolet Camaro 2SS/RS 1LE Join Date: Jun 2008 Location: Orlando, FL Posts: 728	I wonder what fbodfather has to say about the Hurst option. I could certainly be wrong, but I don't recall too many comments from him on this particular issue. Perhaps there's something he knows but won't say (he's good at that ), or there's really nothing going on at the moment... And as for me, I'm keeping it on for now. I trust my dealer will let me know when they're ready to submit my order for production, and at that time, we'll determine if I still need to remove the Hurst for my order to go through. __________________ Current: 2014 BRM 2SS/RS 1LE w/NAV, NPP, Recaros Former garage: 2010 IBM Camaro 2SS/RS 6M 2011 Avalanche LT

03-26-2009, 08:38 AM	#26
DragonCamaro Drives: 2010 2SS/RS IBM Join Date: Dec 2008 Location: Mulvane Posts: 316	I got in touch with my dealer the other day and asked if they took off the shifter when i asked like two weeks ago they didn't know so i told them to make sure and he was like you might lose your current position put should be part of the first build cycle. What the hell do they mean as far as i was told none of their orders were picked up yet. Or do they mean of their orders they have? Any ideas?

03-26-2009, 10:00 AM	#28
CamaroScotty Account Suspended Drives: Your new SLP Camaro! Join Date: Jul 2008 Location: Cedarburg, WI Posts: 6,801	GM had a spec change on the part, thus a delay. (so I'm told)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
* The TRUTH about the HURST SHIFTER OPTION ANNOUNCMENT *	CamaroScotty	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	53	03-17-2009 11:32 PM
Do i have to take the hurst shifter off order if i dont want camaro to be delayed?	CamaroEnergy4Life	5th Gen Camaro SS LS LT General Discussions	6	03-12-2009 10:42 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM
UPCOMING CAMARO IMPORTANT DATES	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	125	01-11-2009 12:31 AM
Thread Size on Hurst Shifter?	r0cketdr	Cosmetics and Lighting Modification Discussions	0	11-18-2008 01:29 PM