V-6 Engine cover mods - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dragom · 03-07-2010, 04:58 AM

wer2foxs where did you get the paint and how did you do it. What is behind the cloth on the door??

wer2foxs · 03-07-2010, 09:42 AM

Quote:

Originally Posted by dragom

wer2foxs where did you get the paint and how did you do it. What is behind the cloth on the door??

You have to remove the interior door panels and then remove the cloth panels from the door panel. Thye are attached with plastic heads and you have to cut the heads with a dremel. Replacing the painted panels you have to use 3/8" screws and washers. The dash trims are held with clips and pop off.

The panel that holds the cloth is a very thin plastic if held to the light (when the glue is off) you can practically see through it. It is very sensitive when I scraped off the glue on it. It actually damaged in with deep scratch marks!

I learned the hard way using a flat razor knife that you would use for this process. Tip: use mineral spirits or a light amount of paint stripper with a cloth to dissolve the glue and never use a tool. I could not believe how sensitive it was. I had to use bondo to smooth out the scratches the razor knife made. Lots of sanding, wet sanding and primer took care of it. 4/5 rounds of it! Y

A cheap tip using the yellow paint: I ordered the Ralley Yellow paint from duplicolor(20 bucks a can) but of course I ran out. I went to Wal Mart of all places and found an EXACT match! It was Krylon Sun Yellow however it is gloss. I used a satin clear glaze to tone it down. It costs 3 bucks a can!

pleigh · 03-07-2010, 09:55 AM

Quote:

Originally Posted by gumbo2000

All the engine covers are great. I can't wait to get mine in so I can start painting.

dragom ..... where did you get the chrome oil cap?

Thanks!

I think that's the chrome oil cap cover, several on ebay.

example:

http://cgi.ebay.com/ebaymotors/2010-...Q5fAccessories

scrming · 03-07-2010, 09:57 AM

Doors look GREAT!

scrming · 03-07-2010, 09:59 AM

Quote:

Originally Posted by pleigh

I think that's the chrome oil cap cover, several on ebay.

example:

http://cgi.ebay.com/ebaymotors/2010-...Q5fAccessories

I'm thinking this cap:

http://cgi.ebay.com/ebaymotors/2010-...item53dcb9534d

then see if Scott and do the CF treatment on it to match the cover... ????

pleigh · 03-07-2010, 10:06 AM

Quote:

Originally Posted by wer2foxs

I know this is not engine covers but it is my own mod. I took the cloth panels off the doors, removed the cloth, glue and did a ton of prep and ended up with these. You can order this kit through various GM parts vendors but they have been out of stock for two months. They cost anywhere from 360 to 450 depending on where you can back order them so I thought I would do my own. The long dash trim is not shown because of the endless times I have redone them and are still in progress. The panels were redone totally three to four times!The panels were installed today. A very trying project to say the least but it has kept me busy the last couple of weeks. If I am lucky I may have the dash trim done tomorrow if it turns out alright. I will show pics of the final product when it is done.

Great job! People tend to forget when watching paint done on Muscle Car the amount of "Ooops.. sand, and repeat" that actually takes place to get the finished product.

dragom · 03-07-2010, 11:52 AM

no the oil cap i got was from billetanything.com they were the cheapest I found for 24.95 with free shipping.

SNV · 03-07-2010, 01:25 PM

Quote:

Originally Posted by gumbo2000

Teccboxx ..... where did you get the round medallion in the center? I've been trying to come up with something different for that area and like what you've done.

Thanks!

I would like to know the same hehe. Also what kind of clearcoat did you use? Yours look to have more of a shine then some of the others.

Tecca · 03-07-2010, 02:10 PM

I designed the mediallion and then shipped the model off to china and had them custom machine it for me. Unfortunatly this is a one of a kind item, I would love to make some more but don't have a license to sell GM related items.

As for the clear coat I took it to my paint guy who did my stripes. So there are 2 coats of SIM and 3 coats of clear. However it doesn't matter what type of clear you use, make sure you put 2-5 coats on and then use a hand glaze and polish it to get that extra shine.

Camaro Freak · 03-07-2010, 06:52 PM

Cool, Heres my IOM engine cover. For those that are interested this is the factory GM painted cover. I had them throw it in when I finalized the deal on my NEW ride.

dragom · 03-09-2010, 06:20 PM

is that overspray on the hood or just a reflection.

Camaro Freak · 03-09-2010, 08:07 PM

Its reflection. Flash was on and reflected off the chevrolet emblem. I would die if it was overspray. LOL

showstopper · 03-09-2010, 08:24 PM

We actually have another design we are working on. I will have pics up in the next couple of days.

fixxer56 · 03-10-2010, 09:27 AM

Not to bust your chops, but I hope they're a bit better than the last one

03-07-2010, 09:57 AM	#172
scrming Red Brick of Vengeance! Drives: 12 Second Brick Join Date: Jun 2009 Location: at my pulpit Posts: 7,745	Doors look GREAT! __________________ 2011 Ford Flex EcoBoost Limited - 12.727 @ 109.790 MPH

03-07-2010, 06:52 PM	#178
Camaro Freak Drives: 2010 IOM 2LT 334HP Join Date: Feb 2010 Location: NC Posts: 1,586	Cool, Heres my IOM engine cover. For those that are interested this is the factory GM painted cover. I had them throw it in when I finalized the deal on my NEW ride. Attached Images __________________

03-09-2010, 08:07 PM	#180
Camaro Freak Drives: 2010 IOM 2LT 334HP Join Date: Feb 2010 Location: NC Posts: 1,586	Its reflection. Flash was on and reflected off the chevrolet emblem. I would die if it was overspray. LOL __________________

03-10-2010, 09:27 AM	#182
fixxer56 Thin Blue Line Drives: ABM 2LT/RS #10094 Join Date: Oct 2008 Location: SE Pa Posts: 1,386 View My Garage	Not to bust your chops, but I hope they're a bit better than the last one __________________ One of the "Few Blue"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - ENGINE COVER PAINTED	sav1	Camaro DIY & HOW-TO instructions & discussions	110	03-28-2016 01:29 PM
Roadtrip in Victory Red Camaro SS w/ cloth interior! (Captured Test Fleet Car)	HeatherR	Camaro Photos \| Spyshots \| Video \| Media Gallery	930	08-31-2010 10:21 AM
LLT engine specifications	Tran	Wiki	2	03-29-2010 10:06 AM
Engine Cover	Zee28rs72	Cosmetics and Lighting Modification Discussions	1	09-18-2009 10:47 AM
Who is still waiting for their engine cover?	OHIOSS	5th Gen Camaro SS LS LT General Discussions	7	08-22-2009 11:18 PM

03-07-2010, 04:58 AM	#169
dragom 2G1FB1EV3A9121989 Drives: Rally Yellow RS Coupe Join Date: Jul 2009 Location: indianapolis Posts: 843 View My Garage	wer2foxs where did you get the paint and how did you do it. What is behind the cloth on the door??

03-07-2010, 11:52 AM	#175
dragom 2G1FB1EV3A9121989 Drives: Rally Yellow RS Coupe Join Date: Jul 2009 Location: indianapolis Posts: 843 View My Garage	no the oil cap i got was from billetanything.com they were the cheapest I found for 24.95 with free shipping.

03-07-2010, 02:10 PM	#177
Tecca . Drives: ... Join Date: Apr 2009 Location: Colorado Posts: 1,380	I designed the mediallion and then shipped the model off to china and had them custom machine it for me. Unfortunatly this is a one of a kind item, I would love to make some more but don't have a license to sell GM related items. As for the clear coat I took it to my paint guy who did my stripes. So there are 2 coats of SIM and 3 coats of clear. However it doesn't matter what type of clear you use, make sure you put 2-5 coats on and then use a hand glaze and polish it to get that extra shine.

03-09-2010, 06:20 PM	#179
dragom 2G1FB1EV3A9121989 Drives: Rally Yellow RS Coupe Join Date: Jul 2009 Location: indianapolis Posts: 843 View My Garage	is that overspray on the hood or just a reflection.

03-09-2010, 08:24 PM	#181
showstopper Drives: 2010 RS/SS Join Date: Jul 2009 Location: USA Posts: 3,442	We actually have another design we are working on. I will have pics up in the next couple of days.