08-25-2013, 12:27 PM | #1 |
Drives: 2014 Artic white stingray ordered Join Date: Nov 2010
Location: San Angelo, Texas
Posts: 176
|
What did I do this time
Ok I was at a car show and had a small issue with the remote I'm using to turn some LEDs on and off. Long story short I pulled fuse 32 that I have them wired to for power so I could get it to the hotel without getting in trouble for flashing blue lights in my grill. Now I have a check engine light on even after I fixed issue and returned the fuse. What is 32 for will it reset itself. Thanks for any help I can get.
__________________
1100....02/17/2014
2000....03/11/2014 3000....03/13/2014 TPW 4/7 3300....03/24/2014 TPW 4/7 3400....03/31/2014 TPW 4/7 3800....04/09/2014 4B00....04/10/2014 4200....MYSTERY 5000....04/14/2014 |
08-25-2013, 01:55 PM | #2 |
Drives: 2014 Artic white stingray ordered Join Date: Nov 2010
Location: San Angelo, Texas
Posts: 176
|
anyone?
__________________
1100....02/17/2014
2000....03/11/2014 3000....03/13/2014 TPW 4/7 3300....03/24/2014 TPW 4/7 3400....03/31/2014 TPW 4/7 3800....04/09/2014 4B00....04/10/2014 4200....MYSTERY 5000....04/14/2014 |
08-25-2013, 04:04 PM | #3 |
|
According to the manual, fuse 32 is for the Canister Vent Solenoid. Car probably tried to vent the EVAP Canister while the fuse was out and detected a malfunction. Yes, the CEL will reset itself, but it may take awhile. Swing by Auto Zone or any of those places, have them pull the code to make sure that's it and if it is, have the code reset. I would expect the code to be P0449. You can also disconnect the battery to reset, but I wouldn't do it that way because of all the other stuff that can reset also; windows, radio etc.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
08-25-2013, 06:10 PM | #4 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,303
|
well actually, it may or may not reset, many of the codes, once they lock in, regardless if they clear or not, you have to get them reset at the dealer or at least somewhere that has the software to reset them.
__________________
|
08-25-2013, 07:55 PM | #5 |
Drives: 2014 Artic white stingray ordered Join Date: Nov 2010
Location: San Angelo, Texas
Posts: 176
|
Ran to orielys and they plugged in and sure enough that was the code..had me hit the reset button twice and the light went away and everything is good. now i need to rewire and get the led problem fixed..lol
__________________
1100....02/17/2014
2000....03/11/2014 3000....03/13/2014 TPW 4/7 3300....03/24/2014 TPW 4/7 3400....03/31/2014 TPW 4/7 3800....04/09/2014 4B00....04/10/2014 4200....MYSTERY 5000....04/14/2014 |
08-25-2013, 10:17 PM | #6 |
|
Good to hear.
__________________
ProCharger P1X, Vengeance Racing Kaotic Cam, ARH Headers and Exhaust with Borla ATAK mufflers, MGW Shifter, MTI Drop Springs, Forgeline RB3C Wheels, 3.91 gears, Night Owl LED Control System
|
|
|
Thread Tools | |
|
|