05-21-2021, 03:00 AM | #1 |
Drives: CAMARO 2014 Join Date: Dec 2020
Location: MOON
Posts: 12
|
Part called that attach front bumper to line fender
For camaro 2014. I was wondering if someone know what the part (looks like a bracket) that attach the side of the front bumper to wheel liner fender. There is something that looks like it calledZL1 Front Bumper extension but I do not want the "extension look". Mine was ripped off the left side of front bumper.
I know that this part looks like it usually comes with the bumper normally so I am not sure if they sell it separately since it is normally glued to the front bumper? I am hoping that I can get the part only and glue it back on to my bumper if not i have to by a used 1 and ripped that off from it. If you able to state the part #, that is a plus thanks in advance, j. |
05-21-2021, 04:22 AM | #2 |
Whosoever Will
|
|
05-21-2021, 03:35 PM | #3 |
Drives: CAMARO 2014 Join Date: Dec 2020
Location: MOON
Posts: 12
|
none of the parts on the hyperlink (https://www.gmpartsdirect.com/v-2014...mponents-front) match the part i need. that's why I wasnt sure if they sell it separately.
|
05-21-2021, 04:09 PM | #4 |
Whosoever Will
|
Did you try this one??? https://www.gmpartsdirect.com/v-2014...and-components
|
05-21-2021, 11:19 PM | #5 |
Drives: CAMARO 2014 Join Date: Dec 2020
Location: MOON
Posts: 12
|
I didnt before but now I did. Base on the new hyperlink, the part looks like the drawing of part #7 but I know its not the insulator. It attaches in the front of wheel liner fender to the front bumper. Thank you for trying to help me.
|
05-22-2021, 06:01 AM | #6 |
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,013
|
I know exactly the part you’re talking about. They break often. Might* be part number 11, but it’s hard to say
|
05-23-2021, 10:44 PM | #7 |
Drives: 2010 Camaro 2SS/RS Join Date: Mar 2016
Location: Indianapolis
Posts: 288
|
Been awhile since I've had my front bumper off but on most vehicles now the fender liner attaches to the bumper itself, there are plastic tabs molded into the inside of the bumper that the mounting screws go through.
__________________
491 hp/438 tq
LS3 Conversion | Comp Cam Custom Grind | Mast Heads | Comp Cam Push Rods | LS7 Timing Chain | 180 Thermostat | Ported Intake | Ported TB | SLP UDP | K & N CAI | Custom 3800 Stall Converter | Aluminum 1 Piece Driveshaft | Kooks 1 7/8" LTH | High Flow Cats | ARH 3" Exhaust | ARH Mufflers | Eibach Lowering Springs | BMR Floor Brace Subframe Connectors with Tunnel Brace | BMR Moly Lower Rear Control Arms | Oracle LED Halo Kit |
05-23-2021, 11:21 PM | #8 |
Drives: 2010 Camaro 2SS Join Date: Mar 2018
Location: Bakersfield, CA
Posts: 320
|
what is the part number for number 4?
|
05-25-2021, 01:03 AM | #9 |
Drives: CAMARO 2014 Join Date: Dec 2020
Location: MOON
Posts: 12
|
#4 actually attach the side left fender (not the wheel liner fender) to the front bumper.
cyber10, I did do more research and see what you mean about it being molded. My old bumper was wrecked so I got a new one. I was not able to see the wreck bumper for the "molded". My new bumper has it as a an "attached" bracket so its like glued on (no screws) for some reason and not molded. O well most likely I can get the zl1 extension and make the bracket myself Thanks to every1 that helped me. |
12-20-2022, 11:58 AM | #10 |
Drives: 2015 camaro ss Join Date: Dec 2022
Location: Texas
Posts: 2
|
Hey man, did it work for you? Could you post us pics, im running in the same issue here!
|
|
|
|
|