Stainless works retro or MBRP for exhaust? - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Good2go · 03-28-2013, 08:29 PM

Quote:

Originally Posted by ssmike

That thing is a real beast!

Sounds "evil, wicked, mean, and nasty"! My buddy used to have a '70 Roadrunner with a sticker in the rear window that said that! It would be perfect in your rear window!

Yeah, I love it! You gotta like it loud though!

bumblebeecamaro83 · 03-28-2013, 08:46 PM

I've had both.

I switched from MBRP to what I currently have now, stainless works retro chambered cat back.

The stainless works is much better sounding. Trust me.

The stainless works retro chambered exhaust is louder than the Borla Atak.

Abrahams11SS · 03-28-2013, 10:14 PM

Stainless RETRO for sure man.. I listened to cars on youtube for months before finally deciding which one to buy.. It sounds the meanest and once you throw some long tubes on it's unltra badass... Next is a Cam..

LS1hawk · 03-29-2013, 08:09 AM

Quote:

Originally Posted by Abrahams11SS

Stainless RETRO for sure man.. I listened to cars on youtube for months before finally deciding which one to buy.. It sounds the meanest and once you throw some long tubes on it's unltra badass... Next is a Cam..

Did the same research and came to the same conclusion. Love The way Stainless Works Retro sounds.

Abrahams11SS · 03-30-2013, 11:01 AM

Quote:

Originally Posted by LS1hawk

Did the same research and came to the same conclusion. Love The way Stainless Works Retro sounds.

It's by far the best exhaust if you ask me.. Sweet Synergy SS man.. I wanted one but couldn't find a manual 2SS

Nutro · 03-30-2013, 11:45 AM

Looks like I might go with the Stainless Works with the Turbo S mufflers

mpsgolf · 12-01-2015, 02:54 PM

Quote:

Originally Posted by bumblebeecamaro83

I've had both.

I switched from MBRP to what I currently have now, stainless works retro chambered cat back.

The stainless works is much better sounding. Trust me.

The stainless works retro chambered exhaust is louder than the Borla Atak.

How is the volume of the SW retro compared to the MBRP? Louder? A lot or little? I am torn between the two. I plan on shorties not LT and later solo high flow cats. I've heard clips with the SW retro and solos that seem like it would be much too loud for me - though I love the deep sound.

Badfinger · 12-01-2015, 03:54 PM

Heads-up. This is an old thread you've dug up and bumblebeecamaro83 hasn't posted on this forum since 2013.

Ajdin@A2BMotorsport · 12-01-2015, 04:23 PM

Quote:

Originally Posted by mpsgolf

How is the volume of the SW retro compared to the MBRP? Louder? A lot or little? I am torn between the two. I plan on shorties not LT and later solo high flow cats. I've heard clips with the SW retro and solos that seem like it would be much too loud for me - though I love the deep sound.

Hey,

I have the MBRP, I have heard both setups on a cammed/header car and the MBRP is a little quieter but not by much.

Heres a soundclip for your listening pleasure.

Feel free to PM me if you have any questions

Homeless Man · 12-01-2015, 04:50 PM

Is the MBRP raspy at all?

GONIF · 12-01-2015, 05:07 PM

I have the MBRP 3 inch and it has no rasp and is deep and not too loud . I have SW 1 7/8 long tubes with HF cats . I have used MBRP systems on many diesel trucks and the quality is fantastic ,so it was a no brainer when it came to the Camaro . The price was great and the sound is what I was looking for. Deep with no rasp.

jshaf · 12-01-2015, 07:07 PM

old thread........BUT I have the complete Stainless works set up, Retro Chambered 3 inch cat back, High flow cats, Stainless Power 1 7/8 headers. sounds awesome, deep thunderous Muscle Car Glory

ryebread929 · 12-01-2015, 08:55 PM

I've had mbrp on my last 2 trucks so I ordered the mbrp for my camaro. It will be here tomorrow! i wanted 3" piping and the price on the kit was awesome. Under 600 bucks shipped after the 50.00 rebate. Can't wait to install it!

Badfinger · 12-05-2015, 05:03 PM

Quote:

Originally Posted by ryebread929

I've had mbrp on my last 2 trucks so I ordered the mbrp for my camaro. It will be here tomorrow! i wanted 3" piping and the price on the kit was awesome. Under 600 bucks shipped after the 50.00 rebate. Can't wait to install it!

Which kit are you getting?

03-30-2013, 11:45 AM	#20
Nutro Drives: 2011 2SS Synergy Green Join Date: Nov 2011 Location: Austin, Texas Posts: 3,670	Looks like I might go with the Stainless Works with the Turbo S mufflers __________________ L99 With a Maggie

12-01-2015, 04:50 PM	#24
Homeless Man Homeless Life Chose Me Drives: LS3 (sold 4/21) Join Date: Nov 2014 Location: Streets of Philly Posts: 3,650	Is the MBRP raspy at all? __________________ Pity a man in familiar places, who yet feels like a stranger.

12-01-2015, 05:07 PM	#25
GONIF Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE Join Date: Feb 2014 Location: The Left lane PHOENIX AZ Posts: 2,626	I have the MBRP 3 inch and it has no rasp and is deep and not too loud . I have SW 1 7/8 long tubes with HF cats . I have used MBRP systems on many diesel trucks and the quality is fantastic ,so it was a no brainer when it came to the Camaro . The price was great and the sound is what I was looking for. Deep with no rasp. __________________ OLD GUY FLYING FAST AND LOW

12-01-2015, 07:07 PM	#26
jshaf Montani Semper Liberi Drives: 2011 Black 2SS/RS w/ IOM stripes Join Date: Feb 2010 Location: Masontown, WV Posts: 4,841	old thread........BUT I have the complete Stainless works set up, Retro Chambered 3 inch cat back, High flow cats, Stainless Power 1 7/8 headers. sounds awesome, deep thunderous Muscle Car Glory __________________ Stainless Works 1 7/8 Long Tude Headers, Stainless Works High Flow Cats, Stainless Works Retro Chambered Catback, Z/28 Air Intake, RDP Tuned, FR41 Chrome Rims, 1100W stereo, 35% Tint

03-28-2013, 08:46 PM	#16
bumblebeecamaro83 Drives: 2012 Camaro SS Transformers Edition Join Date: Mar 2012 Location: NY Posts: 5	I've had both. I switched from MBRP to what I currently have now, stainless works retro chambered cat back. The stainless works is much better sounding. Trust me. The stainless works retro chambered exhaust is louder than the Borla Atak.

03-28-2013, 10:14 PM	#17
Abrahams11SS Drives: 2013 ZL1 V3RT Join Date: Feb 2012 Location: Tampa FL Posts: 804	Stainless RETRO for sure man.. I listened to cars on youtube for months before finally deciding which one to buy.. It sounds the meanest and once you throw some long tubes on it's unltra badass... Next is a Cam..

12-01-2015, 03:54 PM	#22
Badfinger Drives: 2010 2SS Join Date: Mar 2010 Location: Dayton, Ohio Posts: 387 View My Garage	Heads-up. This is an old thread you've dug up and bumblebeecamaro83 hasn't posted on this forum since 2013.

12-01-2015, 08:55 PM	#27
ryebread929 Drives: 2015 1SS/RS Join Date: Nov 2015 Location: Tilton NH Posts: 23	I've had mbrp on my last 2 trucks so I ordered the mbrp for my camaro. It will be here tomorrow! i wanted 3" piping and the price on the kit was awesome. Under 600 bucks shipped after the 50.00 rebate. Can't wait to install it!