04-10-2012, 01:54 PM | #1 |
Drives: 2013 Camaro ZL1 bone stock 9K miles Join Date: Oct 2010
Location: Philadelphia, PA
Posts: 389
|
Feedback
Does anyone know how to give positive feedback, moderators, anyone?
__________________
SLP- long tube headers, hi flow cats w/full SLP 3'' PowerFlo exhaust incl/X-pipe, 160 degree stat, SLP Blackwing CAI. Dyno tuned by ECS-407/409RWHP&TQ. BMR- trailing arms w/poly knuckle bushings, toe links, cradle bushings and differential bushings. QA1 rear lower control arms. Hurst short throw shifter, SS- level 4 axles, DSS- aluminum driveshaft, Pfadt- sport 1.5" rear sway-bar. SPOHN 1.25" front sway-bar. Monster LT1-S twin clutch. Prothane motor mounts. Best 1/4 mile so far- 12:70ET @ 112.24 MPH w/ 2.06 second 60'.
SOLD. |
04-10-2012, 04:58 PM | #2 |
Wonderfully Awful Idea
|
I'm positive somebody can.
__________________
|
04-10-2012, 06:53 PM | #3 |
Smoked by a GIRL
|
If u have nothing nice to say, dont say it
__________________
2014 2SS/RS Summit White w/ IOM interior "Powder 2.0"
|
04-10-2012, 06:54 PM | #4 |
|
Are you talking about iTrader feedback? That's the only feedback I know of on here.
|
04-10-2012, 06:56 PM | #5 |
I used to be Dragoneye...
|
Can you be more specific, please?
|
04-10-2012, 09:34 PM | #6 |
Drives: 2013 Camaro ZL1 bone stock 9K miles Join Date: Oct 2010
Location: Philadelphia, PA
Posts: 389
|
A couple member of the forum helped me out and I was wondering if there was a way to give them positive feedback, forum feedback, not itrader.
__________________
SLP- long tube headers, hi flow cats w/full SLP 3'' PowerFlo exhaust incl/X-pipe, 160 degree stat, SLP Blackwing CAI. Dyno tuned by ECS-407/409RWHP&TQ. BMR- trailing arms w/poly knuckle bushings, toe links, cradle bushings and differential bushings. QA1 rear lower control arms. Hurst short throw shifter, SS- level 4 axles, DSS- aluminum driveshaft, Pfadt- sport 1.5" rear sway-bar. SPOHN 1.25" front sway-bar. Monster LT1-S twin clutch. Prothane motor mounts. Best 1/4 mile so far- 12:70ET @ 112.24 MPH w/ 2.06 second 60'.
SOLD. |
04-10-2012, 10:50 PM | #7 |
I used to be Dragoneye...
|
No, unfortunately we don't have a "good member / bad member" system like that. itrader is about as close as we come.
|
04-11-2012, 12:54 PM | #8 |
Drives: 2013 Camaro ZL1 bone stock 9K miles Join Date: Oct 2010
Location: Philadelphia, PA
Posts: 389
|
Thank you for your help, I'm not real good at these forums, would an iTrader positive feedback be sort of the same, and how do you post the positive feedback on iTrader? Thanks again.
__________________
SLP- long tube headers, hi flow cats w/full SLP 3'' PowerFlo exhaust incl/X-pipe, 160 degree stat, SLP Blackwing CAI. Dyno tuned by ECS-407/409RWHP&TQ. BMR- trailing arms w/poly knuckle bushings, toe links, cradle bushings and differential bushings. QA1 rear lower control arms. Hurst short throw shifter, SS- level 4 axles, DSS- aluminum driveshaft, Pfadt- sport 1.5" rear sway-bar. SPOHN 1.25" front sway-bar. Monster LT1-S twin clutch. Prothane motor mounts. Best 1/4 mile so far- 12:70ET @ 112.24 MPH w/ 2.06 second 60'.
SOLD. |
04-11-2012, 12:55 PM | #9 |
|
iTrader is strictly for sale/trade transactions.
|
04-11-2012, 01:05 PM | #10 |
Drives: 2013 Camaro ZL1 bone stock 9K miles Join Date: Oct 2010
Location: Philadelphia, PA
Posts: 389
|
Do you mean for vendors/sponsors of sales from them only?
__________________
SLP- long tube headers, hi flow cats w/full SLP 3'' PowerFlo exhaust incl/X-pipe, 160 degree stat, SLP Blackwing CAI. Dyno tuned by ECS-407/409RWHP&TQ. BMR- trailing arms w/poly knuckle bushings, toe links, cradle bushings and differential bushings. QA1 rear lower control arms. Hurst short throw shifter, SS- level 4 axles, DSS- aluminum driveshaft, Pfadt- sport 1.5" rear sway-bar. SPOHN 1.25" front sway-bar. Monster LT1-S twin clutch. Prothane motor mounts. Best 1/4 mile so far- 12:70ET @ 112.24 MPH w/ 2.06 second 60'.
SOLD. |
04-11-2012, 02:02 PM | #11 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Just post something saying Thanks!
You could post in the general section or if they helped you out with say a suspension install/mod then maybe post in the suspension section etc. Subject something like: Big THANKS to xxxxxx! and then tell what's up.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
04-11-2012, 02:09 PM | #12 |
|
It's not limited to just vendors, but it's really only for those who you sold something to or bought something from. I suppose if you really want to leave some feedback, you could post a visitor message on their public profile.
|
04-11-2012, 02:26 PM | #13 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,330
|
10 2SS/RS 6M, to be honest, and something tells me you have already done this, but the best thing to do is to send them a personal THANK YOU through a PM that way they know that you appreciate their help.
__________________
|
04-11-2012, 06:23 PM | #14 |
Drives: 2013 Camaro ZL1 bone stock 9K miles Join Date: Oct 2010
Location: Philadelphia, PA
Posts: 389
|
Thank you everyone for the help, question answered.
This forum has been a great help to me and I'm sure a lot of other peaple, everyone seems very helpful, I wish I had more time to be online and posts more to help anyone who has had some of the problems I was having that have been resolved, there's so much information on this forum I find that most of it has already been dicussed by the time I'm ready to post something! For now though I definetly want to thank "Squintz Palladris" for helping me out with the axles, and "JOE Z28" for getting me the 1st 5th gen magazine. Thanks again.
__________________
SLP- long tube headers, hi flow cats w/full SLP 3'' PowerFlo exhaust incl/X-pipe, 160 degree stat, SLP Blackwing CAI. Dyno tuned by ECS-407/409RWHP&TQ. BMR- trailing arms w/poly knuckle bushings, toe links, cradle bushings and differential bushings. QA1 rear lower control arms. Hurst short throw shifter, SS- level 4 axles, DSS- aluminum driveshaft, Pfadt- sport 1.5" rear sway-bar. SPOHN 1.25" front sway-bar. Monster LT1-S twin clutch. Prothane motor mounts. Best 1/4 mile so far- 12:70ET @ 112.24 MPH w/ 2.06 second 60'.
SOLD. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pfadt Stage 4 suspension feedback - SS M6 car | JMAC2011 | Suspension / Brakes / Chassis | 4 | 05-23-2011 12:39 PM |
Remote unlock Feedback (lights) ? | Kubi | 5th Gen Camaro SS LS LT General Discussions | 6 | 04-02-2010 08:23 PM |
SS is coming next week, this is my plan for it, feedback appreciated | robertway | Cosmetic Maintenance: Washing, Waxing, Detailing, Bodywork, Protection | 8 | 11-17-2009 08:33 AM |
Feedback from those that have MBRP & LS3 | caverman | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 14 | 09-28-2009 07:34 PM |
FEEDBACK -- PLEASE... | rez14usn | USA - Southwest | 10 | 09-25-2009 01:52 PM |