You are browsing camaro5 
 |
|
09-20-2014, 03:15 PM
|
#1 |
 Drives: Chevelle Join Date: Sep 2014
Location: Ireland
Posts: 3
|
Horsepower estimates
Hi folks,iv just bout a chevelle with an ls3 swap,I'm looking to get a rough hp estimate with the mods that have been put on the car,2010 corvette ls3,high rise intake,4barrel carb,stand alone fuel managemet, msd ignition,custom headers pipes,H pipe... Thanks in advance
|
|
|
|
09-20-2014, 03:29 PM
|
#2 |
 
Drives: 1973 z28 Rs , 2012 SS/Rs Blk/Blk M6 Join Date: Oct 2009
Location: Laguna
Posts: 197
|
Should be 400 horsepower at least.
Sent from my iPhone using Tapatalk |
|
|
|
|
09-20-2014, 04:48 PM
|
#3 |
 
Drives: Magna Charged 2011 SS/RS M6 Join Date: Aug 2014
Location: Huntsville Al
Posts: 68
|
Stock LS3 on dyno is aroun 350-375 rwhp. Depends on dyno. That's stock.
|
|
|
|
|
09-20-2014, 05:12 PM
|
#4 |
        
Drives: 73 VETTE ,, 05 2500hd diesel,14 1LE Join Date: Feb 2014
Location: The Left lane PHOENIX AZ
Posts: 2,626
|
What ever the horsepower was with the fuel injection and computer on the 2010 Vette ,it is no longer the same with no computer, and fuel injection . You would need to dyno it and tune the carb and ignition to maximize power . If you can get the computer, intake, fuel injection and ignition with harness from a 2010 Vette you would have a better running car that makes as much power or more with better fuel mileage . Just something to bear in mind .
__________________
OLD GUY FLYING FAST AND LOW
|
|
|
|
|
09-20-2014, 07:31 PM
|
#5 |
|
Drives: Chevelle Join Date: Sep 2014
Location: Ireland
Posts: 3
|
I know the engine 426hp standard,and iv also read the carbs make more torque and power top end,and with all the other mods iv been getting estimates of 500hp...I just want to know what you folk think is achievable with the mods been tuned correctly ? thanks
|
|
|
|
|
09-20-2014, 08:13 PM
|
#6 |
  
Drives: 2013 SS Join Date: May 2013
Location: DFW
Posts: 4,102
|
No cam?
Kinda odd setup IMO
__________________
|
|
|
|
|
09-20-2014, 08:22 PM
|
#7 |
|
Drives: Chevelle Join Date: Sep 2014
Location: Ireland
Posts: 3
|
Cam and nitrous on the way, I bought it built this way,any advice will be helpful and taken on board
|
|
|
|
|
|
|
|
 |
|
|
