08-28-2014, 05:42 PM | #1 |
Drives: 2010 SS/RS Victory Red Join Date: Jan 2011
Location: Philly, PA - Bill
Posts: 235
|
TVS2300 rebuild
Has anyone had to rebuild or have rebuilt an SLP TVS2300??
Mine has a tapping that sounds like a bad bearing. Ill take a video soon. Bill
__________________
|
08-28-2014, 07:01 PM | #2 | |
Drives: 2010 SS/RS Victory Red Join Date: Jan 2011
Location: Philly, PA - Bill
Posts: 235
|
sounds to me like its in the front
__________________
|
|
08-28-2014, 07:21 PM | #3 |
Flying da helicopter
|
Is that the older version of the SLP supercharger?
|
08-28-2014, 07:38 PM | #4 |
PHAT B33
Drives: 2012 TF3 Camaro 2SS/RS M6 Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,460
|
Yes it is.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
|
10-17-2014, 05:25 PM | #5 |
Drives: 2010 SS/RS Victory Red Join Date: Jan 2011
Location: Philly, PA - Bill
Posts: 235
|
Since all of you follow my daily activities so avidly I figured I would give you an update:
With the help of a friend and fellow member I was put in touch with Hank at SLP Specialty Vehicles. I took the charger off and brought it to him. He and his minions took a look at it and determined it needed to go back to Eaton Superchargers. It was shipped to Eaton who found a bad bearing in the back, not only did they fix that bearing but put all new internals in the whole thing!! CLASS ACT! Shipped back to SLP, I picked it up and put it back on, with some help over the phone with Hank. Sounded funny to me, so I drove the car back over to Hank, he listened to it and to him it sounds perfect. I could not be more pleased with SLP Specialty Vehicles and Eaton Superchargers. THANK YOU
__________________
|
|
|
|
|