03-25-2014, 09:37 PM | #1 |
Drives: 2011 Camaro LS Join Date: Mar 2014
Location: Bakersfield, CA
Posts: 240
|
Quick question...
Sorry if this has been asked five million times, but I just have a quick question..
For those of you who have painted your engine covers, what type of paint do you use? Photos? I'm wanting to paint mine but I don't want it to look bad. I tried searching but I didn't really find what I was looking for. |
03-25-2014, 09:55 PM | #2 |
Drives: 2010 Camaro RJT 2SS/RS M6 Join Date: Oct 2008
Location: 36°13′12″N 82°20′17″W
Posts: 492
|
I just wanted something simple so I had it painted RJT like the car. Four Years and no issues.
__________________
|
03-26-2014, 07:56 AM | #3 |
Drives: 2011 ss synergy green Join Date: Mar 2013
Location: wv
Posts: 41
|
1- wet sand
2-blow dry with air [ make sure all moister is gone] 3 - 2 coats self etching primer , I used rustolium spray can 4- used regular car paint in spray can, [make sure all primer is covered] 5- topped of with 3 coats of clear coat paint, also used rustolium spray paint. You can buy primer and clear coat paint at local hardware store or walmart. Hope this helps. |
03-26-2014, 08:59 AM | #4 |
Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013
Location: Falls Church, Virginia
Posts: 3,600
|
Just be careful when removing, parts of the cover are flexible and some types of paint will crack when flexed
__________________
"You simply cannot trust quotes found on the internet." -Abraham Lincoln
|
04-15-2014, 12:19 AM | #5 |
I got one of these from a member on here and it looks sweet.
I own a graphics shop I ended up putting vinyl lettering on it and I'll do some graphics later. Paint is nice, but I love that vinyl is completely removable when needed, that way I can change up the look any time I feel like it lol. If you want something up just message me. I'll put a pic up when I get a chance to snag one.
__________________
|
|
04-16-2014, 04:48 PM | #6 |
Drives: 2010 ''RS1'' my own package Join Date: Aug 2010
Location: Concord NC
Posts: 237
|
yea these are a little tougher to paint because they have a texture to them, but you'll do fine. post some pics when you get done.
__________________
2010 1LT A6, Hurst shifter and handle, 3pc rear spoiler, streetscene splitter, ss front end with ZL1 grill, ABL , footwell and cup holder lighting, ss cat back exhaust, Eibach lowering springs, custom engine cover, 4pk gauges, speedhut A pilliar pod and gauges, metra kit and kenwood stereo, 2014 ss hood scoop with stock rain tray, 3D Carbon fender vents, rear lighted bowtie, and ultra gauge.
|
|
|
|
|